Scythe Ninja 5 air cooler review -
Introduction
Scythe NINJA 5 air cooler review
Will this ninja cut the temperatures?
Today, we are reviewing an air cooler from Scythe: the NINJA 5. The last time we got our hands on this company’s cooler was a whopping 10 years ago – it was the Ninja 3 model (which earned the “Recommended” award). This time around, it’s not a single-tower CPU cooler, but rather a dual one with two fans attached. The Scythe NINJA 5’s fans (Kaze Flex 120 PWM) have a rather narrow and low RPM range of 300 to 800. This should bring the noise lower for sure. But will it be enough to provide a cooling capacity that can handle the i9 9900K and AMD Ryzen 7 3700X? The installation should be easier this time due to introducing the new (third) generation of the Hyper Precision Mounting System (H.P.M.S.). We’ll make sure to check that too. Coming back to the fans, the maximum airflow is 43.03 cfm, with the noise levels not exceeding 14.5 dBA (but you should remember that almost all manufacturers measure this with their own methodology, so you can’t really make direct comparisons). The overall dimensions are huge, at 138 x 155 x 180 mm (WxHxD). You can find six heat pipes on this monster; each of them is 6 mm thick.
The Scythe NINJA 5 is compatible with the following CPU sockets:
- AMD - AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1
- Intel - LGA2066/2011-v3/2011/1200/1151/1150/1155/1156/775
The total weight is imposing, as it’s 1190 g (with the fans). You won’t find any RGB here, only a sleek and modest design.
It should be fascinating to see how it performs against other air coolers, including the flagship Noctua NH-D15 and some AIOs, shouldn’t it? As I mentioned earlier, we’ll check that on both AMD (Ryzen 7 3700X) and Intel (Core i9 9900K) platforms. For roughly 60 USD, you receive a dual-tower cooler with a pair of silent 120 mm fans. The warranty period is 2 years. Let’s head to the specs/feature page, shall we?
Today, we are reviewing an air cooler from Scythe: the NINJA 5. The last time we got our hands on this company’s cooler was a whopping 10 years ago – it was the Ninja 3 model (which earned the “Recommended” award). This time around it’s not a single-tower CPU cooler, but rather a dual one with two fans attached.
Scythe Ninja 3 CPU cooler review
We test and review the Scythe Ninja 3 CPU cooler. The new organization of the aluminum fins allows, in cooperation with the eight U-shaped copper heatpipes marketed as M.A.P.S. (Multiple Airflow pass-through structure) guarantees high performance. This will get more clear in the photo-shoot though. According to Scythe is that translates into 7 per cent more heat removal compared to a cooler like the previous Ninja. The cooler is equipped with a 120mm-ventilator that can be regulated with the help of an included fan-controller in RPM from 470 to 1900 RPM with noise levels varying from 7 to 37dBA depending on your preference.
Scythe Ninja Plus CPU Cooler
An old chinese wisemen once told me that a problem that plagues today's computers is the heat produced by the CPU. A little while ago when enthusiasts were on the lookout for a high performance cooler, they had to compromise, and that compromise was to be found in the noise department. Performance and silence didn't belong in the same sentence. If people wanted performance, they usually needed to buy a cooler that would either create a mini cyclone in their case, and most probably, sound like a jet airplane getting ready to take off.