Overclocking
BIOS overclocking
Overclocking, tweaking the Core 9000 series is fairly simple. Any and all CPUs we tested reached 5200 MHz on all cores (this includes the six and eight-core parts). The voltage will vary per processor, but you should sit in the 1.30~1.35 Volt range. The good news is that on most motherboards you can leave voltage settings at auto. Even newer motherboards have AI overclocking available in the BIOS, by algorithm it'll learn the best stable tweak. For now, we'll do it manually though. If you plan to overclock, always invest in good hardware by the way (MOBO/PSU/Memory/Cooling), the cheaper motherboards often are not well tuned or do not have broad-spectrum features for enthusiast overclocking. Also get yourself a good power supply and proper processor cooling. Overclocking with a many core processor (doesn't matter if that is Intel or AMD) is more complicated than you expect it to be. Overclocking multiple cores to a high clock frequency is a relatively easy to do job, but is managed best from the BIOS. The Guru3D reader-base overclocks mostly from the BIOS to try and find the maximum stable limit. The generic overclock procedure for multiplier based overclocking is as follows:
Your reachable target for Coffee Lake-S in the 9000 series is 5 GHz to 5.2 GHz on all cores, with a good processor. Results may vary, as we are using engineering samples (ES).
- Leave base clock (bus) for what it is right now (100 MHz)
- Set the per core multiplier at a maximum of your liking:
- Example 1: 100MHz x 50 = 5000 MHz
- Increase CPU voltage; though AUTO often works fine on many motherboards you can do it manually as well. Start at 1.30 ~ 1.35 volts and work your way upwards into a state of equilibrium in perf and cooling temps
- Make sure your processor is properly cooled as adding voltage = more heat
- Save and Exit BIOS
In our case we got all cores running at 5200 MHz. Our Corsair LCS cooler was capable of cooling the proc fine, as shown below ~1.325 Volts is needed and, obviously, we enabled the XMP profile on the memory for dual-channel 3200 MHz.
We hit 75~80 Degrees C on the package sensor at 5200 MHz / 1.325V
The results you will yield from the overclocks will be smaller with default faster-clocked procs though. Intel has pushed the 9000 series pretty far already, and they did sharpen the Turbos as well. So, a lot of the time you're already close to that 5 GHz marker with the faster processors. However, with all cores at 5200 MHz and threaded applications, well that's where you'll see the most benefit. Let's peek at some examples:
So we are at 121 seconds on the default clocks. Overclocked on all cores we achieve 1024M of prime in 109 seconds.
CB15 scores 1689 points (multi) whereas at default clocks we are at 1515 points.
Time Spy scores 12358 (score) and 8403 (CPU) at default. Overall you can see pretty nice performance increases with the Core i7 9700K.
