Product Showcase
There is one top fan; a very quiet 13.9cm sized fan. It comes with RPM control and thus guarantees cool performance and silent operation. There's a pretty nice and optimal airflow throughout the PSU. The PSU has an ATX design yet is slightly more lengthy, it'll fit in any chassis though, its dimensions are: 150mm x 86mm x 175mm (W x H x D).
It's a heavy fracker alright, weighing 3 Kilograms! Hey they heavier they are, the more quality you get.
When it comes to wiring, we get a smile on our face, have a look at the supplied connectors, all with good length as well. The peripheral connectors for example like the Molex start at 50 CM / 20" and end at roughly 90 CM. The 8-pin ATX motherboard connector is nice and lengthy as well at 60 CM, great for better cable routing.
The ATX motherboard connector as well reached to 55CM.
Cabling wise you'll get:
- 24P motherboard
- 8P CPU
- 4+4P CPU
- 6+2 PIn PCie PEG
- 6+2 PIn PCie PEG
- Sata
- 4P Molex
- FDD
Graphics card wise you get to play with four 6+2 Pin PCie connectors. So that's four 8-pin if needed (two GTX 590 cards for example).
We see sleeved cabling with dark colored connectors. That's a good design. The cables have a proper nice length, though I would like to see the cables sleeved in black and the connectors colored black as well. But that is purely for aesthetic reasons of course.
Last photo, here we can observe power distribution as labeled on the PSU. The +12V rails certainly keep impressing me. You'll get four of them rated at 30 Amps each.
