Product Showcase

The AQUAFUSION is equipped with three 120mm fans that offer high air pressure, on one hand that means they are ideal for water cooling, however, at high RPM they would be. Additional advantage makes a wide range of speed, between 500 and 2000 RPM. We advise setting a fan curve in the motherboard BIOS, so fans won’t run at their full speed.

When we flip it around we see the radiator a little better. Easy to mount, most big-tower chassis' have pre-fitted holes and space for 360mm rads, but not all of them. Fortunately, you can choose from many radiator sizes. 

 
At the CPU cooling block/pump around, we see an all copper base, that is definitely fairly flat. You'll notice that one wire leads towards the cooling block, this is for the pump and RGB residing in that block. Thermal paste is included in the package as well. The cube-shaped water block includes the pump and measures approximately 70mm x 70 mm x 55mm.
 

What I like is that the top side of the block is really small and flat. I am not a fan of big shouty LED-lit logos, so this I can live with really. Just above the pump power feed cable, you can see a connector for aRGB. So you have two wires leading out of the block. The pump used with the AQUAFUSION is a dual-chamber design that utilizes ceramic bearings in order to ensure maximum performance. This design is supposed to result in good performance as well as an extended cooler lifespan. The pump can ramp up to 2000 RPM.