Corsair H100i RGB Pro XT liquid cooler review -
Introduction
Corsair H100i RGB PRO XT liquid cooler review
The new performance AIO LCS cooler?
Today, we are reviewing an AIO cooler from Corsair: the H100i RGB PRO XT. It’s a new revision of a product that’s been available on the market for quite some time, the H100i Pro. As before, it’s a 240 mm AIO with an aluminum (rather than copper) radiator and pump that are coupled into a single loop, and aided by fans (2 x 120 mm in this case). As in most, if not all, Corsair products nowadays, you get RGB lighting with iCUE software support. This is achieved via a USB connection to the internal motherboard header. The cooler is not expandable, but this is normal for products in this segment of the market (with exceptions like the Alphacool Eisbaer 280 Extreme or Swiftech H240 X3, which we reviewed here earlier). One interesting feature is the “zero DBA mode” which makes the cooler passive in idle/under low loads (below 40 degrees Celsius). Three variants of this new family are available:
- 240 mm (the one reviewed here)
- 280 mm (H115i RGB PRO XT)
- 360 mm (H150i RGB PRO XT)
The fans for the H100i (and H150i) are PWM-controlled 120 mm ML (Magnetic Levitation) series units with 400-2400 rpm and noise performance up to 37 dBA (but you should know that every manufacturer measures this in a different way). Fan airflow is 75 CFM, so that should be enough to make the heat transfer effective.
The dimensions are 276 mm × 120 mm × 27 mm, which is rather typical. The H100i has RGB illumination, but it’s “only” compatible with Corsair’s own lighting system – iCUE. The pricing looks very reasonable, as you can find out yourself below:
- H100i RGB PRO XT
- H115i RGB PRO XT
- H150i RGB PRO XT
The warranty period is five years, which is a highlight of this offer. Let’s check out the manufacturer’s info, specs, and features on the next page.
Headsets are one of the types of peripherals that Corsair offers (there are also PC components, but that’s not a story for this review). It ranges from budget-oriented HS series (the reviewed one is one of them), then there’s the mid-range Void series, and it ends with high-end Virtuoso. The HS series starts with HS35, and till now, it also contained HS45, HS50, HS55, HS60, HS65, HS70, HS75, and HS80 (some of them had different, wireless variants). We’re checking out the all-new Corsair HS65 Wireless in this review (today is the debut).
Corsair H170i Elite Capellix XT review
Corsair has announced an updated line of liquid coolers, and we have the Corsair H170i Elite Capellix XT edition on our test bench to see how the most beefy triple-fan 420mm model performs. The kit co...
Corsair Vengeance RGB DDR5 6000 CL36 review
In July, Corsair presented a new series of DDR5 memories: the Vengeance RGB DDR5. The available kits from the RGB edition have a frequency higher than the base 4800 MHz (5200-6600 MHz); the non-RGB version starts from 4800 MHz. We are checking the Corsair Vengeance RGB 6000 MHz CL36 DDR5 kit today. It's in the middle frequency in the series. We already had an opportunity (almost three years ago) to review the Vengeance (Pro) RGB series RAM, but it was for the DDR4; the frequency was 3200 MHz, and it received a "Top Pick" award, and also the Vengeance RGB Pro SL which had 3600 MHz frequency (with CL18) and got the "Approved" award. But let's focus back on the tested DDR5 kit.
Corsair Katar Elite Wireless mouse review
In this article, we review the Corsair Katar Elite Wireless mouse. It’s an optical gaming mouse that was launched today, on 26.10.2022. The Katar model is a new version of the Katar Pro Wireless that was introduced on October 2020. The Katar Elite Wireless is targeted at gamers, but it should also work more than fine as a regular mouse. This time, the optical sensor is not the 10K DPI PMW3325 but a 26K DPI Corsair Marksman. It has 1 DPI resolutions steps, 650 IPS tracking, and up to 50G acceleration.