AMD Ryzen 5 3600 review - Overclocking and tweaking

by Hilbert Hagedoorn on: 07/22/2019 01:36 PM [

] 37 comment(s)

Overclocking and tweaking by BIOS

When you plan to overclock the processor, always invest in good hardware. And that includes a proper motherboard, power supply, memory and of course, cooling. Cheaper motherboards are often not well tuned or designed in terms of power delivery for enthusiast overclocking. That can translate into a lesser power delivery (phases) design quickly warming up the related components, causing instability. Also, never underestimate the benefits of a quality power supply. Most Silver rated ones we can recommend.

When you tweak a processor, depending on what you are trying to achieve, you often need to add voltage to the processor, that in turn creates more heat. Ergo, proper processor cooling is mandatory. Overclocking with a many-core processor (doesn't matter if that is Intel or AMD) is often more difficult to accomplish. If you overclock by BIOS (which 99% of us do), really it all comes down to the quality of the BIOS (mobo brand), and merely a few registers you need to fiddle with.

Remember that we're going for an all-core overclock and that means a lower clock frequency than the highest Turbo bin offers. What you need to do:

Enable and start at 4200 MHz (42 Multiplier)
Apply 1.40V to the CPU (or simply leave it at auto)
Work your way upwards from there until the system becomes unstable and then back down at least 100 MHz.

A small tip

I mentioned voltage tweaking, the reality is that leaving the motherboard at default and altering just the CPU multiplier could be sufficient as well. A reason why you should tweak CPU voltage, however, is that you can define the lowest needed voltage for your target frequency. Less voltage equals less heat and power consumption, your choice of course. Most Ryzen Series 3000 CPUs will be able to hit a speed up-to 4.2~4.3 GHz with proper cooling on all cores. You need to keep in the back of your mind that this is an all-core tweak.

The 3600 - In the end we got the proc stable at 4200 MHz on all cores at 1.425V. This, however, was pushing it. I would, in theory, recommend a default voltage usage and a 4.1 GHz all-core tweak if your proc can handle it. Even more, recommended, don't overclock as the benefits are really small if at all as the separate higher turbo bins can go higher then your all-core tweak.

27 pages « < 24 25 26 27

AMD Ryzen 7 3800X review
We reviewed pretty much all Series 3000 processors from AMD, however one review had been missing, until today that is, join us un a review of the feisty and spicy Ryzen 7 3800X eight-core processor. ...

AMD Ryzen 5 3400G review
Vega11 based desktop APUs from AMD are here, in this review we take the Ryzen 5 3400G for a spin. AMD has been going strong with their processors, and now increases their market validity by adding a ...

AMD Ryzen 5 3600 review
We again review a six-core model Ryzen 5 3600 processor, you know, the one without an X. It's 200 Mhz slower on the base and turbo clocks, but a whopping 50 bucks cheaper. Worth it?...

AMD Ryzen 5 3600X review
We recently reviewed the Ryzen 7 3700X & Ryzen 9 3900X processors from AMD. How about the six core parts eh? Well, let's check out the new Ryzen 5 3600X in this review....