Unless you have seriously professional equipment worth thousands of EUROs, it's very hard to test, and most of all stress a PSU. Firstly we do a quick test with this nifty new gadget I have been testing. With a power supply tester I'll quickly check if the rails are all working properly and what amount of voltage they are delivering without a PC connected to it.
This is just a test to see if the PSU is functional and working properly before we connect it to equipment worth a stack load of money.
Okay, so we can instantaneously see that all primary voltage rails are working properly. Voltages seem to be precisely what they need to be, and fall well within ATX specifications. So this is looking good. This however is not an objective enough tool to measure voltage at all.
For more precise measurements we'll test with a multi-meter. For those that are wondering what the PG delay being displayed on the screen is, here we go: Power Good (PG) Delay and Off Delay: It takes a power supply at least 100ms to completely power up before it can offer the proper DC voltages to the computer. The computer will not attempt to turn on until the power supply is finished pwering up and sends a Power Good (PG) signal to the motherboard via a PG terminal. On power up, the Power Good (PG) terminal is polled for a brief period before the PC turns on to check the status of the power supply. Only after the +5V and +3.3V rails are above threshold does the PG signal go "high." The PG signal stays on until the PC is ready to power off. The period of delay between switching on the PSU and the actual application of power is the PG delay. Typical values are 100-350ms. The PG delay of the power supply should roughly match the PG delay specification of the motherboard or power on problems may occur.
So this is within specifications. Let's do a real-world test.
Enermax Liqtech 120X and 240 review We test and review the all new Enermax Liqtech 120X and 240 Liquid coolers. Can it keep up with similar Asetek and compeeting products? Let's find out!...
Enermax Fulmo GT review We review and test the Fulmo GT. Enermax has been going very strong with their power supply and fans. For a while now they also offer PC cases, and more recently they released what seems to be the biggest chassis I've ever laid my hands on. This chassis series has HPTX support for the bigger than biggest motherboards and some pretty cool features as well.
Enermax KW001 Briskie Keyboard mouse combo review Keyboard kits come in all sizes, shapes and forms .. and that's next to a gazillion of manufacturers that offers them. Surprisingly enough a few weeks ago Enermax, the guys behind the best power supplies and the brightest fans also launched a keyboard/mouse combo. Briskie is all about value and as such for 25 USD/EUR you get a mouse and what we think is a very decent wireless RF keyboard.
Enermax Platimax 850W power supply review Enermax always is able surprise us, they now have released the Platimax power supplies, that means a platinum certification and yeah .. that boils down to a 94% efficient product. Very few products get this certification. Today we'll grab a couple of older older supplies and see if what they claim is true, can we really save on energy. We fire off three PSU's at a P55 / Core i7 870 based system setup with a GeForce GTX 590. We then monitor power consumption in idle, CPU productivity (stress) mode and then lock into a gaming session.