Hitman III: PC graphics perf benchmark review
TeamGroup CX2 1TB SATA3 SSD review
EVGA GeForce RTX 3070 FTW3 Ultra review
Corsair 5000D PC Chassis Review
NZXT Kraken X63 RGB Review
ASUS Radeon RX 6900 XT STRIX OC LC Review
TerraMaster F5-221 NAS Review
MSI Radeon RX 6800 XT Gaming X TRIO Review
Sapphire Radeon RX 6800 NITRO+ review
Corsair HS70 Bluetooth Headset Review
Review: EK P360 Performance Liquid Cooling Kit
We review the P360 Performance custom loop Liquid Cooling from EK, consisting out of all components needed to assemble and design your own liquid cooling loop. In this review we will build a performance class PC and test this kit on a Core i7 6700K processor. The end result is a setup that is surpassing any AIO kit in both performance and low noise levels. Even overclocked the results are terrific!
Read our full review here.
Review: Asustor AS3204T NAS - 04/26/2016 08:30 AM
In this article we take a look at the new Asustor AS3204T NAS. We review the 4-bay NAS server which has been designed to be extremely price competitive with a low price, yet offering serious performan...
Review: Gigabyte X170 Extreme ECC and Intel Xeon E3-1230 v5 - 04/21/2016 08:15 AM
Join us in a test on the all new Gigabyte X170 Extreme ECC motherboard. We arm it with an Intel Xeon E3-1230 v5 and ECC memory. Though the chipset and processor used are intended for the server platfo...
Review: Zalman Z9 Neo White Chassis - 04/19/2016 07:59 AM
We review the new white edition of the Z9 Neo chassis from zalman, a chassis has a very nice design chassis and comes with some proper fan LED bling as well. It is a chassis that can keep up with the ...
Review: Plextor M7V series 512GB SSD and M.2 SSD - 04/14/2016 07:44 AM
Plextor released their new value series SSD tagged under the M7V series SSDs, with that 'V' not for vendetta or victory, it's for value. At 26 cents per GB the M7V series is all about delivering a ...
Review: Noctua NH-D15S processor cooler - 04/12/2016 08:18 AM
We review the big-mack of Noctua coolers available in an S model, the silent version NH-D15S CPU cooler. The D15S is basically your D15 yet with one fan. As we learned it helps making the product more...
RonanH
Member
Posts: 66
Joined: 2006-09-23
Member
Posts: 66
Joined: 2006-09-23
#5266225 Posted on: 05/03/2016 10:02 AM
So with the inverted chassis you have to use the rad as an intake? That's great for your cpu temps but won't it increase chassis temps and also gpu temps?
So with the inverted chassis you have to use the rad as an intake? That's great for your cpu temps but won't it increase chassis temps and also gpu temps?
ivymike10mt
Senior Member
Posts: 228
Joined: 2015-01-28
Senior Member
Posts: 228
Joined: 2015-01-28
#5266241 Posted on: 05/03/2016 10:54 AM
Looks okay. Just Titan should get loop as well - thats the loudest point i guess.
Looks okay. Just Titan should get loop as well - thats the loudest point i guess.
wsgroves
Senior Member
Posts: 164
Joined: 2011-02-22
Senior Member
Posts: 164
Joined: 2011-02-22
#5266363 Posted on: 05/03/2016 03:09 PM
How hard is it to add say 2x gpu blocks to the loop? A boat load of work? Wonder if its enough to handle say 2x 980ti's +cpu. I dont have much exp with custom water but am interested in it.
How hard is it to add say 2x gpu blocks to the loop? A boat load of work? Wonder if its enough to handle say 2x 980ti's +cpu. I dont have much exp with custom water but am interested in it.
fantaskarsef
Senior Member
Posts: 12052
Joined: 2014-07-21
Senior Member
Posts: 12052
Joined: 2014-07-21
#5266373 Posted on: 05/03/2016 03:20 PM
Well for two 980TIs plus a CPU this won't be sufficient, maybe a start
But the more blocks (three that way) you have, the stronger the pump should be (the included D5 pump is strong enough for that though, I'm running the same pump with a way more restrictive setup).
Also, you would need at least one fan (on a rad) per component to cool, the more the better also... so with that starting kit I think you won't be able to do that if you're not going for the 360 rad (3x120mm fan on there), or even adding a second rad + fans.
What I say is that you might not want to use that premixed cooling... I use destilled water with biocides (against algae) as well as a silver coil in there (for the same reason). I am avoiding premixed things as I've heard that old coolant can clog up your loop eventually. Also, changing the cooling in case you change your setup is easier when you just have to refill destilled water until you're full again, and adding a few single drops of biocide.
If you do that, include another rad and/or more blocks, you should also make sure to count all the fittings and parts you need, as well as probably getting some more tubing.
But in any way, if you plan to do a true custom water cooling loop, make a build thread, and be warned that it might cost some money there... especially if you're going for GPUs, which will need new blocks once you change them, etc....
How hard is it to add say 2x gpu blocks to the loop? A boat load of work? Wonder if its enough to handle say 2x 980ti's +cpu. I dont have much exp with custom water but am interested in it.
Well for two 980TIs plus a CPU this won't be sufficient, maybe a start
But the more blocks (three that way) you have, the stronger the pump should be (the included D5 pump is strong enough for that though, I'm running the same pump with a way more restrictive setup).
Also, you would need at least one fan (on a rad) per component to cool, the more the better also... so with that starting kit I think you won't be able to do that if you're not going for the 360 rad (3x120mm fan on there), or even adding a second rad + fans.
What I say is that you might not want to use that premixed cooling... I use destilled water with biocides (against algae) as well as a silver coil in there (for the same reason). I am avoiding premixed things as I've heard that old coolant can clog up your loop eventually. Also, changing the cooling in case you change your setup is easier when you just have to refill destilled water until you're full again, and adding a few single drops of biocide.
If you do that, include another rad and/or more blocks, you should also make sure to count all the fittings and parts you need, as well as probably getting some more tubing.
But in any way, if you plan to do a true custom water cooling loop, make a build thread, and be warned that it might cost some money there... especially if you're going for GPUs, which will need new blocks once you change them, etc....
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 12052
Joined: 2014-07-21
Small custom loop that beats any AIO in HH's benchmarks. Not bad, also rather quiet in use. Sure it's not cheap, but the numbers speak for themselves (you can push 1.5v into it and still end up at the level of stock air cooling...).