Dell SE2717H FHD with IPS and FreeSync

Dell outs a new Full HD screen, IPS based. The bezels are nicely thin and it comes with OSD control buttons to the left. The curved VA panel has been replaced by a flat IPS-type panel, with a 1920 x 1080 (Full HD) resolution and matte anti-glare finish to the screen surface.

The Dell Dell SE2717H is specced with a 1000:1 static contrast, 178° horizontal and vertical viewing angles and 6-bit + FRC colour processing. The refresh rate is 48 – 75Hz variable, with Adaptive-Sync/FreeSync. A 6ms grey to grey response time is specified. 

Dell SE2717H Specifications:

• Display Size: 27 Inches
• Aspect Ratio: (16:9)
• Backlight Technology: LED
• Display Screen Coating: Antiglare with 3H hardness
• Panel Type: In-Plane switching Technology
• Panel Bits: 6-bits + FRC panel
• Maximum Resolution: 1920 x 1080
• Viewing Angle: 178° vertical / 178° horizontal
• Contrast Ratio: 1000: 1 (typical), 8 Million: 1 (Dynamic)
• Pixel Pitch: 0.3114 mm
• Pixel Per Inch (PPI): 82
• Brightness: 300 cd/m2 (typical)
• Response Time: 6ms (gray to gray)
• Free Sync support frame frequency: Yes, 48-75Hz
• Color Support:
  • Color Gamut (typical): 84% (CIE 1976), 72% (CIE 1931)
  • Color Depth: 16.7 Million colors
• Narrow Bezel (Edge of Monitor to Edge of viewable screen) 11mm
• Stand
  • Tilt (-5° to 21°)
  • Built in cable-management

The stand only offers tilt adjustment and attaches towards the bottom of the monitor. There are no VESA holes. Inputs are HDMI 1.4a (with Adaptive-Sync) and VGA. Pricing is really cheap at $249.

Dell SE2717H FHD with IPS and FreeSync