Corsair H170i Elite Capellix XT review
Forspoken: PC performance graphics benchmarks
ASRock Z790 Taichi review
The Callisto Protocol: PC graphics benchmarks
G.Skill TridentZ 5 RGB 6800 MHz CL34 DDR5 review
Be Quiet! Dark Power 13 - 1000W PSU Review
Palit GeForce RTX 4080 GamingPRO OC review
Core i9 13900K DDR5 7200 MHz (+memory scaling) review
Seasonic Prime Titanium TX-1300 (1300W PSU) review
F1 2022: PC graphics performance benchmark review
Review: Corsair Strafe RGB MK.2 (silent switches)
In this review, we check out the new Corsair Corsair Strafe RGB MK.2 keyboard. The MK.2 is based on Cherry MX switches and is available in two variants. One has Cherry MX Red switches, the other (the one review today) Cherry MX Silent.
Check out the review here.
« AMD Radeon Shows Strong performance with Battlefield V Closed Alpha · Review: Corsair Strafe RGB MK.2 (silent switches)
· Lian Li Releases Maximum Airflow with PC-011 Air Chassis »
Review: Be Quiet! Dark Base Pro 900 Rev.2 - 07/03/2018 01:02 PM
We review the revision 2 of the Dark Base 900 Pro from be quiet! Their flagship chassis has been updated with a new fan controller, faster Silent Wings 3 fans, a PSU shroud cover, USB 3.1 Gen 2 suppor...
Review: Patriot Viper Gaming RGB (2x8 GB) 3200 MHz DDR4 - 07/02/2018 01:19 PM
We review all-new Patriot Viper Gaming RGB 16 GB (dual channel) 3200 MHz DDR4 RAM kit from yes, you’ve guessed it right - Patriot. It’s not the fastest from this new series, but it...
Review: Noctua NF-A12 and P12 Redux Fan Group Test - 06/29/2018 04:46 PM
Especially our fans and your fans, a review on that new Sterrox based Noctua fan. Well, that and many more newly released ones. Noctua recently released new Sterrox manufactured 120mm fans in a wide r...
Review: Raijintek Leto Pro RGB - 06/28/2018 08:58 AM
In this review, we look at the Raijintek Leto Pro RGB CPU cooler. The unit itself is a dual fan 120mm cooler that sports a relatively slimline single tower heatsink. paired with addressable RGB fans, ...
Review: ASRock Phantom Gaming Radeon RX580 8G OC - 06/28/2018 08:53 AM
The ASRock Phantom Gaming X Radeon RX 580 OC with 8GB graphics memory has reached Europe. This two slot cooled mainstream graphics card series will allow you to play your games in both the Full HD 108...
DribbelDog
Junior Member
Posts: 15
Joined: 2012-12-31
Junior Member
Posts: 15
Joined: 2012-12-31
#5562750 Posted on: 07/05/2018 11:38 AM
Once I was foolish enough to get a Corsair keyboard. The K65 RGB to be precise. I believe it was the first board to ever come out with Cherry RGB switches, which is why I got temped. But my god, wat a horrible keyboard. I need some bullet points for this one:
Thick non-detachable cable right in the middle. My god. Worst possible placement in my opinion, and no room for customization because it's not detachable. It takes up !2! USB ports as well.
The (first generation) Cherry RGB switches were scratchy as hell. Feels horrible. I guess Corsair doesn't deserve all the blame for this, but hey they chose to produce a keyboard with these horrible switches. I'll admit I've been too lazy to lube them to this day though.
The lighting on (at least the first generation of) Cherry RGB switches wasn't bright enough in my opinion. And I don't even like them that bright. Also, white wasn't 'white enough'; didn't look nearly as good as pure white led Cherry switches. Probably because of the Cherry solution of having the entire switch housing light up, thus not having light being focused on the key-cap legend.
The Corsair driver/software has been horrific since the start. I'm not a UI designer, but if I can't find my way around the software for a KEYBOARD, it's definitely not intuitive. I would have liked a hardware programmable option instead, even though that's probably not intuitive either. I've had bad experiences with the software that came with the H100 software as well, so I don't really trust Corsair with software at this point. Perhaps the most ludicrous thing is that the keyboard can only handle basic lighting settings from memory. You NEED the driver for the more fancy effects. So when I boot the PC, the keyboard sits in a solid color. When Windows loads, the effects start. It's just sad.
The brushed aluminum stains easily. It looks good at first, but looks rather dirty after only a little while. I've never liked the brushed aluminum finishes of Corsair due to this staining. The same goes for their enclosures, you'd better use gloves.
Mushy media keys. I'd rather not have them at all, or have an FN solution, than to have mushy media keys that feel totally different to the rest of the keyboard.
Corsair tramp stamp. What can I say. Luckily this has long been resolved.
Of course not all of these issues apply to this particular board, but too many still do. Each and every one of them would be a deal breaker on its own to me at this point. There are so many amazing mechanical keyboards out there to buy and/or build, that I can't see why anyone would even consider this anymore.
I know a lot of people are really satisfied with their Corsair boards. I just can't, for the life of me, ever recommend one of these boards to anyone.
Once I was foolish enough to get a Corsair keyboard. The K65 RGB to be precise. I believe it was the first board to ever come out with Cherry RGB switches, which is why I got temped. But my god, wat a horrible keyboard. I need some bullet points for this one:
Thick non-detachable cable right in the middle. My god. Worst possible placement in my opinion, and no room for customization because it's not detachable. It takes up !2! USB ports as well.
The (first generation) Cherry RGB switches were scratchy as hell. Feels horrible. I guess Corsair doesn't deserve all the blame for this, but hey they chose to produce a keyboard with these horrible switches. I'll admit I've been too lazy to lube them to this day though.
The lighting on (at least the first generation of) Cherry RGB switches wasn't bright enough in my opinion. And I don't even like them that bright. Also, white wasn't 'white enough'; didn't look nearly as good as pure white led Cherry switches. Probably because of the Cherry solution of having the entire switch housing light up, thus not having light being focused on the key-cap legend.
The Corsair driver/software has been horrific since the start. I'm not a UI designer, but if I can't find my way around the software for a KEYBOARD, it's definitely not intuitive. I would have liked a hardware programmable option instead, even though that's probably not intuitive either. I've had bad experiences with the software that came with the H100 software as well, so I don't really trust Corsair with software at this point. Perhaps the most ludicrous thing is that the keyboard can only handle basic lighting settings from memory. You NEED the driver for the more fancy effects. So when I boot the PC, the keyboard sits in a solid color. When Windows loads, the effects start. It's just sad.
The brushed aluminum stains easily. It looks good at first, but looks rather dirty after only a little while. I've never liked the brushed aluminum finishes of Corsair due to this staining. The same goes for their enclosures, you'd better use gloves.
Mushy media keys. I'd rather not have them at all, or have an FN solution, than to have mushy media keys that feel totally different to the rest of the keyboard.
Corsair tramp stamp. What can I say. Luckily this has long been resolved.
Of course not all of these issues apply to this particular board, but too many still do. Each and every one of them would be a deal breaker on its own to me at this point. There are so many amazing mechanical keyboards out there to buy and/or build, that I can't see why anyone would even consider this anymore.
I know a lot of people are really satisfied with their Corsair boards. I just can't, for the life of me, ever recommend one of these boards to anyone.
Inquisitor
Senior Member
Posts: 123
Joined: 2013-10-19
Senior Member
Posts: 123
Joined: 2013-10-19
#5562761 Posted on: 07/05/2018 12:08 PM
Don't forget you are comparing a K65 to a Strafe RGB. Not sure but I think the Strafe is marketed as a better quality keyboard.
Not really had any of the issues you describe tbh with the Strafe, other than the 3rd party software which is not very good I admit but then no 3rd party software is very good.
Still functional though and I was able to work my around creating multiple lighting profiles for my keyboard..... although these days I prefer to just stick with a single solid blue backlight
I don't get the whole media keys things either, I don't need or want them really but others surely do as there's always a lot of comments from disgruntled people when keyboards don't have them.
Don't forget you are comparing a K65 to a Strafe RGB. Not sure but I think the Strafe is marketed as a better quality keyboard.
Not really had any of the issues you describe tbh with the Strafe, other than the 3rd party software which is not very good I admit but then no 3rd party software is very good.
Still functional though and I was able to work my around creating multiple lighting profiles for my keyboard..... although these days I prefer to just stick with a single solid blue backlight

I don't get the whole media keys things either, I don't need or want them really but others surely do as there's always a lot of comments from disgruntled people when keyboards don't have them.
ubercake
Senior Member
Posts: 214
Joined: 2014-06-11
Senior Member
Posts: 214
Joined: 2014-06-11
#5562863 Posted on: 07/05/2018 05:12 PM
I have the non-RGB version of the Strafe at home with the Speed switches. I definitely like this for gaming, though you really have to watch the sensitivity when typing.
I had a Ducky Cherry Blue at work that I loved, but there were many noise complaints. They switched me to the non-RGB version of the Strafe keyboard with only red lighting and Silent switches which are the sound-equivalent of a non-mechanical membrane switch with nearly the same mushy feel but a higher actuation point.
The Silent switches are definitely quiet compared to the Cherry Blues.
I have the non-RGB version of the Strafe at home with the Speed switches. I definitely like this for gaming, though you really have to watch the sensitivity when typing.
I had a Ducky Cherry Blue at work that I loved, but there were many noise complaints. They switched me to the non-RGB version of the Strafe keyboard with only red lighting and Silent switches which are the sound-equivalent of a non-mechanical membrane switch with nearly the same mushy feel but a higher actuation point.
The Silent switches are definitely quiet compared to the Cherry Blues.
lightlord
Member
Posts: 32
Joined: 2007-07-14
Member
Posts: 32
Joined: 2007-07-14
#5562889 Posted on: 07/05/2018 06:45 PM
I hope they fixt those silent mx switches cause i'm on my second rgb strafe already and this one also has 7 keys double tapping.
I'm not ggonna send it back because it tookk 3 months to replace the first one
I wish there was a way to fix it myself damn it.
Never ever i'm gonna buy this again PPERIODD
I hope they fixt those silent mx switches cause i'm on my second rgb strafe already and this one also has 7 keys double tapping.
I'm not ggonna send it back because it tookk 3 months to replace the first one

I wish there was a way to fix it myself damn it.
Never ever i'm gonna buy this again PPERIODD
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 123
Joined: 2013-10-19
I've got the original Strafe RGB and really like it. I can't stand the clicking sound of traditional mechanical keyboards which is why I held off for so long but after hearing (or not hearing!) about the silent switches on the Strafe I picked it up and it has been the best keyboard I've used by far.
I might pick this new one up as a couple of the keys on my one have broken. No fault of Corsair, just me being clumsy and dropping heaving things on it!