Corsair M65 RGB Ultra mouse review
Asus ROG STRIX XG43UQ monitor review
Netduma R2 router review
TerraMaster F5-422 NAS Review
Radeon RX 6600 (Sapphire Pulse) review
Radeon RX 6600 (Gigabyte Eagle 8G) review
PowerColor Radeon RX 6900 XT Red Devil review
Corsair Sabre RGB Pro Wireless mouse review
Far Cry 6: PC graphics performance benchmark review
Colorful GeForce RTX 3060 Bilibili 12G review
Enermax OSTROG LITE ATX Chassis
Enermax introduces OSTROG LITE, the new compact mid-tower chassis for entry-level gaming rigs. Featuring the low-profile hairline surface front panel, OSTROG LITE is not only beautifully built, but also includes the features that are expected on a modern case.
OSTROG LITE uses a latest PSU-tunnel (aka PSU Shroud) to not only provide a spacious interior for system installation, but also hide the power supply and cables nicely, which makes the build neat and clean. Not just making the rig look better, the design also helps minimize the cable clutter to improve airflow inside the case and keep system running at a comfortable temperature.
Modern, User-friendly Features OSTROG LITE can accommodate up to 6 fans for effective cooling, along with support for 152mm CPU cooler, 390mm VGA card, and 180mm ATX PSU. Meanwhile, two standard USB 2.0 and one high-speed USB 3.0 are included to give users easy access to external hard drives or flash drives as needed. On the other hand, OSTROG LITE is also equipped with removable dust filters to prevent dust accumulation and make cleaning easy. Availability OSTROG LITE achieves a balance among style, functionality, and affordability.
Enermax Steelwing aluminum micro-ATX case - 10/12/2016 08:57 AM
ENERMAX officially releases STEELWING, a fully aluminum micro-ATX case with a panoramic tempered glass side panel. Its wing-shaped front panel with one pre-installed ENERMAX patented circular-type LED...
Enermax Revolution DUO Series Power Supplies - 10/05/2016 08:14 AM
ENERMAX brings the dual fan PSU back to the market! REVOLUTION DUO, with 80 PLUS certification, features active ventilation for long-term system stability by adopting two patented Twister Bearing fans...
Enermax Now Offers D.F.VEGAS Series comes with Self-cleaning - 09/13/2016 08:32 AM
ENERMAX announces the extension of the D.F. series by adding two LED fans, D.F.VEGAS and D.F.VEGAS DUO. The D.F.VEGAS is a single blue color LED fan; the D.F.VEGAS DUO comes with 2-color LED (red and ...
ENERMAX Launches ETS-T50 AXE Cooler - 07/12/2016 11:41 AM
ENERMAX, the maker of high-performance PC hardware components, presents the ETS-T50 AXE series, the flagship air cooler equipped with 5x Ø6mm heat pipes....
Enermax Unleashes Revolution Xt II Power Supply - 02/22/2016 10:15 AM
ENERMAX is introducing the 2nd Generation of the REVOLUTION X't series. This new generation series is equipped with top-notch 100% 105°C Japanese capacitors, Patented Twister Bearing Fan with ultra-...
sykozis
Senior Member
Posts: 21995
Joined: 2008-07-14
Senior Member
Posts: 21995
Joined: 2008-07-14
#5357978 Posted on: 11/11/2016 09:24 PM
I'll wait to see the price before I get too excited. It does look quite nice though and I think it would be a good replacement for my Raidmax Cobra if it can accommodate a 240MM rad at the top...
I'll wait to see the price before I get too excited. It does look quite nice though and I think it would be a good replacement for my Raidmax Cobra if it can accommodate a 240MM rad at the top...
jura11
Senior Member
Posts: 2611
Joined: 2015-03-20
Senior Member
Posts: 2611
Joined: 2015-03-20
#5357993 Posted on: 11/11/2016 10:22 PM
Hi there
Not sure, but normal price for Ostrog is around £50 and this version shouldn't cost beyond £100 mark, which still is not bad price,if you will look at Evolv ATX with tempered glass that cost $170
Radiator support on this case is unknown, on top you can fit 200mm whivh is not a lot,but at front you should fit 240mm rad
Hope this helps
Thanks,Jura
I'll wait to see the price before I get too excited. It does look quite nice though and I think it would be a good replacement for my Raidmax Cobra if it can accommodate a 240MM rad at the top...
Hi there
Not sure, but normal price for Ostrog is around £50 and this version shouldn't cost beyond £100 mark, which still is not bad price,if you will look at Evolv ATX with tempered glass that cost $170
Radiator support on this case is unknown, on top you can fit 200mm whivh is not a lot,but at front you should fit 240mm rad
Hope this helps
Thanks,Jura
sykozis
Senior Member
Posts: 21995
Joined: 2008-07-14
Senior Member
Posts: 21995
Joined: 2008-07-14
#5358125 Posted on: 11/12/2016 03:09 PM
According to the Enermax product page, the case can fit 2x120 at the top and 2x120 in the front. So, it's just a matter of whether or not there's enough clearance for fans with a radiator installed. Either way, I'm considering buying this case once it's available. I very much like the look of it. My current Raidmax Cobra can accommodate 2x120 or 2x140 at the top, but can't fit a radiator and fans in that location so I'm limited to a 120 rad mounted at the rear.
According to the Enermax product page, the case can fit 2x120 at the top and 2x120 in the front. So, it's just a matter of whether or not there's enough clearance for fans with a radiator installed. Either way, I'm considering buying this case once it's available. I very much like the look of it. My current Raidmax Cobra can accommodate 2x120 or 2x140 at the top, but can't fit a radiator and fans in that location so I'm limited to a 120 rad mounted at the rear.
jura11
Senior Member
Posts: 2611
Joined: 2015-03-20
Senior Member
Posts: 2611
Joined: 2015-03-20
#5358299 Posted on: 11/13/2016 07:20 AM
Hi there
You will see what price will be, but looks OK in my view,did you consider this one, tempered glass and spec is OK too, price is not bad too
http://forums.guru3d.com/showthread.php?t=410890
Regarding the radiator size if supports 2x120mm fans then should support 240mm rad at least
Hope ope this helps
Thanks, Jura
According to the Enermax product page, the case can fit 2x120 at the top and 2x120 in the front. So, it's just a matter of whether or not there's enough clearance for fans with a radiator installed. Either way, I'm considering buying this case once it's available. I very much like the look of it. My current Raidmax Cobra can accommodate 2x120 or 2x140 at the top, but can't fit a radiator and fans in that location so I'm limited to a 120 rad mounted at the rear.
Hi there
You will see what price will be, but looks OK in my view,did you consider this one, tempered glass and spec is OK too, price is not bad too
http://forums.guru3d.com/showthread.php?t=410890
Regarding the radiator size if supports 2x120mm fans then should support 240mm rad at least
Hope ope this helps
Thanks, Jura
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 2611
Joined: 2015-03-20
This case looks like Phanteks Evolv, price is OK too
Thanks, Jura