be quiet! Dark Rock TF2 review
Basemark GPU v1.2 benchmarks with 36 GPUs
Corsair MP600 Pro XT PCIe 4.0 M.2 NVMe review
Teamgroup MP34Q 2TB NVMe SSD review
Lian Li SP750 (750W PSU) review
Teamgroup Cardea Z44Q 4TB NVMe SSD review
Asus ROG Swift PG32UQX monitor review
Plextor M10P 2TB NVMe PCIe 4.0 SSD review
ASRock RX 6600 XT Phantom Gaming D 8GB OC review
G.Skill TridentZ Royal Elite DDR4 3600 MHz CL14 review
EK Waterblocks Expands with Professional Lineup of Products
The EK Professional Line of products is all about the use of high-quality materials, longevity and enhancing the power of your PC or computing unit. These new products are also suited for the most demanding customers, like servers, data centers, deep learning workstations, etc.
EK-Pro Quick Disconnect Kits
The EK-Pro GPU Quick Disconnect Kit is the most efficient way to transform your liquid-cooled GPU into a quick-disconnect ready water block assembly. The kit consists of everything that you would need to transform your existing GPU water block into a quick-disconnect ready product. Included are: 1 meter of Black ZMT 6,5/9,5 mm tubing, two 6 mm OD barb fittings, four tube clamps, 45° Angled GPU Terminal and two sets of Quick Disconnect fittings.
The EK-Pro CPU Quick Disconnect Kit is the most efficient way to transform your CPU water block into a quick-disconnect ready assembly. The kit consists of everything that you would need to transform your existing CPU water block into a quick-disconnect ready product. Included are: 1 meter of Black ZMT 9,5/15,9 mm tubing, two 10 mm OD barb fittings, four-tube clamps and two sets of Quick Disconnect fittings.
EK-Pro Manifold
The EK-Pro Manifold is a purpose-made coolant delivery system for multiple water blocks in workstation systems. It offers perfect coolant distribution by using multiple industry-standard G1/4" In and Out ports. There are two versions of the product available. The EK-Pro Manifold 2CPU 2GPU can support two CPU and two GPU water blocks in parallel or semi-parallel setup. The other EK-Pro Manifold marked with 2CPU 4GPU can support two CPU and four GPU water blocks in parallel or semi-parallel setup.
Availability and Pricing
EK Professional line products are designed and made in Slovenia, Europe and are available for order through the EK Webshop or EK Partner Reseller Network.
- EK-Pro GPU Quick Disconnect Kit €89,90
- EK-Pro CPU Quick Disconnect Kit €89,90
- EK-Pro Manifold 2CPU 4GPU - Acetal €89,90
- EK-Pro Manifold 2CPU 2GPU - Acetal €74,90
EK Water Blocks Announces sTRX4 Compatibility with EK Velocity sTR4 Series Blocks - 12/02/2019 09:26 AM
Well, it's a bit redundant as the socket remained 100% the same, but EK send out a press release that the EK Velocity sTR4 series water blocks remain compatible with all newly released AMD TRX40 ba...
EK Water Blocks Offers EK-Annihilator Pro Series CPU Blocks with Side and Top Fittings - 03/01/2019 09:18 AM
EK is releasing revised server grade EK-Annihilator PRO water blocks that are specifically developed for LGA 3647 (Socket P) Intel processors. The two variants of the water blocks cover Square and Na...
EK Water Offers RGB AM4 Monoblock for Gigabyte X370 Motherboards - 07/03/2017 07:41 AM
EK is releasing a new AM4 socket based monoblock tailor made for Gigabyte X370 motherboards. The EK-FB GA AX370 Gaming RGB Monoblock has an integrated 4-pin RGB LED strip which makes it compatible wit...
Official list of EK water blocks for Custom GeForce GTX 1080 Ti cards - 03/31/2017 08:50 AM
EK is officially announcing the GeForce GTX 1080 Ti water blocks road map. Water blocks for NVIDIA® GeForce® GTX 1080 Ti Founders Edition series graphics cards are going to be available for pre-or...
Antec New Cube Mini ITX Case collaborates with EK Water Blocks - 01/18/2017 10:37 AM
Antechas cooperated with EK Water Blocks (EKWB) to create a new Mini ITX case which offers PC enthusiasts the best watercooling options in a small format case. The Cube's case design has been certifi...
Larry Cañonga
Member
Posts: 23
Joined: 2018-03-27
Member
Posts: 23
Joined: 2018-03-27
#5760008 Posted on: 02/13/2020 10:11 PM
EK's lineup of barbs and quick disconnects. Why the Koolance name on them?
Something I missed in a merger recently?
Sorry I personally have a bad taste in my mouth left over from when Koolance initially released their fittings and they had faulty "O" rings inside. They wouldn't send out new ones and were telling me I had to buy new fittings all together...
Couldn't send a bag of O rings to me after buying hundreds of dollars of fittings..... Never again Koolance. Never again. Don't care if it was over fifteen plus years ago. Companies need to accept their short comings and admit when they messed up.
-----
Koolance first QDs, the VLN or VLN2 or something like that, worked good, I still have them and they still work. However I bought some QD3 which are faster to use, like the one on the picture, where you pull the outer ring which isfaster and they drop less liquid... however as you mentioned the inner gaskets are faulty, all of my QD3s are fu***d after some years, and you can't open them to replace the ring. So I ended up buying some barrow ones, they're freaking gigantic, but I hope they last (and they cost a fraction of Koolance)
EK's lineup of barbs and quick disconnects. Why the Koolance name on them?
Something I missed in a merger recently?
Sorry I personally have a bad taste in my mouth left over from when Koolance initially released their fittings and they had faulty "O" rings inside. They wouldn't send out new ones and were telling me I had to buy new fittings all together...
Couldn't send a bag of O rings to me after buying hundreds of dollars of fittings..... Never again Koolance. Never again. Don't care if it was over fifteen plus years ago. Companies need to accept their short comings and admit when they messed up.
-----
Koolance first QDs, the VLN or VLN2 or something like that, worked good, I still have them and they still work. However I bought some QD3 which are faster to use, like the one on the picture, where you pull the outer ring which isfaster and they drop less liquid... however as you mentioned the inner gaskets are faulty, all of my QD3s are fu***d after some years, and you can't open them to replace the ring. So I ended up buying some barrow ones, they're freaking gigantic, but I hope they last (and they cost a fraction of Koolance)
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 1279
Joined: 2011-01-11
EK's lineup of barbs and quick disconnects. Why the Koolance name on them?
Something I missed in a merger recently?
Sorry I personally have a bad taste in my mouth left over from when Koolance initially released their fittings and they had faulty "O" rings inside. They wouldn't send out new ones and were telling me I had to buy new fittings all together...
Couldn't send a bag of O rings to me after buying hundreds of dollars of fittings..... Never again Koolance. Never again. Don't care if it was over fifteen plus years ago. Companies need to accept their short comings and admit when they messed up.