Dell To release IPS based P2417H and P2717H monitors

The Dell P2417H and P2717H are sporting some aesthetic refinements and updated panels. They still focus on the practical home-office look over anything too eye-catching, but the bezels are thinner at the top and sides this time around. These are comprised of one single hard bezel component rather than a super-slim outer bezel and a panel border.

The monitors use 60Hz IPS-type panels with diagonal screen dimensions of 23.8” (P24)/27” (P27) and a 1920 x 1080 (Full HD) resolution reports pcmonitors:

A matte screen surface is employed, likely of the ‘relatively light’ variety similar to competing Full HD models. As is usual for a panel of this type, strong colour consistency is expected and good viewing angle performance – 178°/178° horizontal/vertical is specified. The usual 6-bit per subpixel + FRC (dithering) is employed and a WLED backlight is used with a specified 72% CIE 1931 colour space (~sRGB). An 8ms grey to grey response time is specified for the smaller model and 6ms for the larger model. 2 USB 3.0 ports feature at the left side, with 2 USB 2.0 ports at the rear. Other ports at the read include; DP 1.2, HDMI 1.4 and VGA. An AC power input features (internal power converter). The included stand attaches using a quick-release bracket mechanism and can be removed to reveal 100 x 100mm VESA holes.

Information on the P24 and P27 can be found on Dell’s website. There are also a number of other models of various sizes, including the P2017 (19.5”), P2217H (21.5”) and P2317H (23”). These models are available or shortly due for release globally.