Beelink SER6 (Ryzen 9 6800H) mini PC review
Be Quiet! Pure Power 12 M - 850W ATX 3.0 PSU review
Corsair H170i Elite Capellix XT review
Forspoken: PC performance graphics benchmarks
ASRock Z790 Taichi review
The Callisto Protocol: PC graphics benchmarks
G.Skill TridentZ 5 RGB 6800 MHz CL34 DDR5 review
Be Quiet! Dark Power 13 - 1000W PSU Review
Palit GeForce RTX 4080 GamingPRO OC review
Core i9 13900K DDR5 7200 MHz (+memory scaling) review
All-in-one water cooling for GPU with 240mm radiator from ID-COOLING
She ain't pretty though. ID-COOLING announced the all-in-one water cooling unit "ICE FLOW 240 VGA ARGB" for graphics cards. The unit applies 240mm radiator based cooling.
An all-in-one water cooling unit for graphics cards that uses a 240mm radiator. Compatible graphics cards are GeForce RTX 20 series, GeForce GTX 7/9/10/16 series, Radeon RX 5700/590/580 series, Radeon Vega 56/64 series, not compatible with GeForce RTX 30 series.
The water block that cools the GPU core can be moved horizontally so that it can be fine-tuned by the card. In addition, a fan with a diameter of 92 mm is mounted on the graphics card cover so that the memory and power supply circuit can be cooled. In addition, various fans and graphics card covers are equipped with an illumination function using addressable RGB LEDs. The product also comes with a small ARGB controller that allows you to change colors and illuminations.
Radiator fan speed 900-2,000rpm ± 10%, air volume 56.5CFM, noise level 16-31.5dBA, cover fan speed 800-2,500rpm ± 10%, air volume 44.3CFM, noise level 14-33.4dBA, pump The rotation speed of the unit is 6,500 rpm ± 10%, the flow rate is 240 L / hr, the static pressure is 1.8 mmH2O, and the noise level is 24 dBA or less.
SilverStone adds White version to all-in-one water-cooled "PF-ARGB" series - 10/27/2020 09:24 AM
A white color variation model has appeared in SilverStone's all-in-one water cooling unit "PF-ARGB" series , which we have previously delivered previously. There are two types of radiator...
Alpenfohn all-in-one water-cooled Gletscher wasser 360 - 10/20/2020 09:20 AM
Meet the company with the funky name, Alpenföhn, a brand developed by EKL announced the all-in-one water cooling units "Gletscherwasser 360" and "Gletscherwasser 240"....
SilverStone IceGem 240P all-in-one water cooling goes bling - 09/29/2020 07:56 AM
Meet the all-in-one water cooling unit "IceGem 240P" from SilverStone, it uses a large heat receiving base that covers the heat spreader of even a Ryzen Threadripper....
ASUS AiO V241DA/M241DA All-in-One Desktop PCs Available - 09/01/2020 08:21 AM
ASUS today announced that the AiO V241DA/M241DA is now available for purchase at US retailers starting at $519.99 USD. The stylish ASUS AiO PCs offer powerful performance in an elegantly designed, spa...
MSI Announces PRO 22XT 10M and MP241 All-in-One Desktop PCs - 08/27/2020 07:58 AM
The MSI PRO Series All-in-One PC is made for both commercial and professional use. Crafted with reliable materials, and optimized with the exclusive applicability for any situation, it is built to del...
Flavio91
Junior Member
Posts: 3
Joined: 2020-03-16
Junior Member
Posts: 3
Joined: 2020-03-16
#5852476 Posted on: 11/09/2020 12:52 PM
NZXT has an adapter with which you can use several CPU AiO. Works like a charm for me.
This is pretty cool. Hope to see more companies move in on this market.
NZXT has an adapter with which you can use several CPU AiO. Works like a charm for me.
AlmondMan
Senior Member
Posts: 986
Joined: 2007-09-03
Senior Member
Posts: 986
Joined: 2007-09-03
#5852496 Posted on: 11/09/2020 02:19 PM
Yeah, I had one for a while. It doesn't look too good either, and you don't really know properties of the tubes for such coolers before you have them in hand. A stiff tube that doesn't bend easily will have issues being hooked on to your GPU. I had a H60 that was just impossible to mount in my smaller case. The tubes were long enough to go from the GPU up to the rear exhaust position, but too stiff, so they'd bend the graphics card absolutely backward. They were too long to go in the front position.
Of course, you can run in to similar issues with a AIO for your GPU, and I have no doubts what so ever that custom watercooling is better. BUT for most people a AIO is fine, and having options to mod cards is cool.
The aftermarket cooler market has all but died out since the glory days of 10-15 years ago. I figure that you probably won't get companies building these AIOs if they're already a GPU manufacturer, but something like Corsair could go do it I'd reckon. It might help them have consumers take baby steps towards their full water blocks.
NZXT has an adapter with which you can use several CPU AiO. Works like a charm for me.
Yeah, I had one for a while. It doesn't look too good either, and you don't really know properties of the tubes for such coolers before you have them in hand. A stiff tube that doesn't bend easily will have issues being hooked on to your GPU. I had a H60 that was just impossible to mount in my smaller case. The tubes were long enough to go from the GPU up to the rear exhaust position, but too stiff, so they'd bend the graphics card absolutely backward. They were too long to go in the front position.
Of course, you can run in to similar issues with a AIO for your GPU, and I have no doubts what so ever that custom watercooling is better. BUT for most people a AIO is fine, and having options to mod cards is cool.
The aftermarket cooler market has all but died out since the glory days of 10-15 years ago. I figure that you probably won't get companies building these AIOs if they're already a GPU manufacturer, but something like Corsair could go do it I'd reckon. It might help them have consumers take baby steps towards their full water blocks.
connos
Senior Member
Posts: 1250
Joined: 2008-10-30
Senior Member
Posts: 1250
Joined: 2008-10-30
#5852499 Posted on: 11/09/2020 02:29 PM
I have the ID-COOLING for my 5700xt. Works like a charm. With a power limit 50% and 230w my junction temp is 90 instead of 110. If I down volt to 170w my junction temp is 80-85.
I have the ID-COOLING for my 5700xt. Works like a charm. With a power limit 50% and 230w my junction temp is 90 instead of 110. If I down volt to 170w my junction temp is 80-85.
fry178
Senior Member
Posts: 1920
Joined: 2012-04-30
Senior Member
Posts: 1920
Joined: 2012-04-30
#5852690 Posted on: 11/09/2020 08:30 PM
meh, as i expect this to be a cpu conversion, not proper dedicated gpu block, ram/vrm/power stiff isnt covered, and not many that are interested in alc gpu will have a case with two spots to mount two 240 rads.
ignoring that you have gpu ccoolers from alphacool covering full range (aio/cover/block),
and even offer exchangeable blocks, so other parts can be reused on new card, reducing cost.
or spend similar amount on a gpu with preinstalled block and add it to existing cpu cooler....
meh, as i expect this to be a cpu conversion, not proper dedicated gpu block, ram/vrm/power stiff isnt covered, and not many that are interested in alc gpu will have a case with two spots to mount two 240 rads.
ignoring that you have gpu ccoolers from alphacool covering full range (aio/cover/block),
and even offer exchangeable blocks, so other parts can be reused on new card, reducing cost.
or spend similar amount on a gpu with preinstalled block and add it to existing cpu cooler....
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 986
Joined: 2007-09-03
This is pretty cool. Hope to see more companies move in on this market.