Basemark GPU v1.2 benchmarks with 36 GPUs
Corsair MP600 Pro XT PCIe 4.0 M.2 NVMe review
Teamgroup MP34Q 2TB NVMe SSD review
Lian Li SP750 (750W PSU) review
Teamgroup Cardea Z44Q 4TB NVMe SSD review
Asus ROG Swift PG32UQX monitor review
Plextor M10P 2TB NVMe PCIe 4.0 SSD review
ASRock RX 6600 XT Phantom Gaming D 8GB OC review
G.Skill TridentZ Royal Elite DDR4 3600 MHz CL14 review
Corsair HS80 RGB Wireless Headset review
Review: Phanteks Enthoo 719 (aka Luxe 2)
Meet the Phanteks Enthoo 719, a full-tower PC chassis with some RGB in it (not exaggerated), which already had its debut back in August 2019. Although half a year has passed since then, there’s a good reason for this delayed review. We’re going to use this chassis for some interesting stuff later, but not without presenting the product to Guru3D readers first (at least those of you who didn’t have a chance to read about it elsewhere).
You can read the full review here.
Review: WD Blue SN550 1TB NVMe SSD - 04/23/2020 08:46 AM
With a rather properly volume sized 1024 GB (1 TB) size, we check out the SN550 froM Western Digital. The all Sandisk based product is plenty fast for any modern age PC or laptop. Read our review ri...
Review: EK AIO 240 D-RGB Liquid CPU Cooler LCS - 04/21/2020 06:07 PM
We test and review the EK AIO 240 D-RGB, an all-in-one liquid cooling kit from EK that can be bought in a dandy design with versions running up-to a 360mm rad. The kits come with Vardar RGB / aRGB com...
Review: Abkoncore Helios 500G Sync - 04/16/2020 04:25 PM
This time, we’re checking out the Abkoncore Helios 500G Sync, an RGB mid-tower PC chassis that originates from the company behind Spire and X2. Read the article right here....
Review: HP EX950 1TB NVMe SSD - 04/14/2020 10:49 AM
HP has released a super-fast new M.2. SSD, the new EX950 series, the rather properly volume sized 1024 GB (1 TB) model which we will review is fast and furious with a rated sequential read and write ...
Review: Gigabyte GTX 1650 WindForce OC (with GDDR6) - 04/10/2020 12:05 PM
In this review, we look at the Gigabyte GeForce GTX 1650 WindForce GDDR6. It's a cooled with some Windforce and a product that was designed for users on a budget, the card breathes and oozes that. Th...
WhiteLightning
Moderator
Posts: 29055
Joined: 2007-09-19
Moderator
Posts: 29055
Joined: 2007-09-19
#5783484 Posted on: 04/28/2020 12:49 PM
Hmm I'm not sure if this is the case, but with my Entoo , there are 2 spots to mount a SSD.
However a bracket is required to mount the disk to the case, and it only had 1 bracket.
On these photos's i do not spot any brackets for the backside, which would mean you would have to buy 3 brackets if you would want to use it on the backside. (which should have been included IMO).
That would be the one negative point for me i guess.
But their cases are really awesome, everything has been thought of very well, and cable management is handled very well! This design looks really nice as well.
Hmm I'm not sure if this is the case, but with my Entoo , there are 2 spots to mount a SSD.
However a bracket is required to mount the disk to the case, and it only had 1 bracket.
On these photos's i do not spot any brackets for the backside, which would mean you would have to buy 3 brackets if you would want to use it on the backside. (which should have been included IMO).
That would be the one negative point for me i guess.
But their cases are really awesome, everything has been thought of very well, and cable management is handled very well! This design looks really nice as well.
The Goose
Senior Member
Posts: 2807
Joined: 2008-02-25
Senior Member
Posts: 2807
Joined: 2008-02-25
#5783488 Posted on: 04/28/2020 01:22 PM
I like phantek cases but this one seems to have lost the Phantek spark, the psu cover seems half arsed and given the main cables that would exit the front are for the gpu the cutout makes the cable look untidy, it would of looked better with 2 horizontal slots to keep the cable flat, its good that the psu is side mounted to allow space for a bottom rad but the psu cover should have been full length, the metal panel vent style doesnt look right either with the curved front panel.
I use a Phantek Enthoo pro in white and urban camo and my spare case is a Corsair Air 540 in white and camo that i am using while im doing some hydro-graphics and modding on my Phantek case but i would not swap either for this one.
I like phantek cases but this one seems to have lost the Phantek spark, the psu cover seems half arsed and given the main cables that would exit the front are for the gpu the cutout makes the cable look untidy, it would of looked better with 2 horizontal slots to keep the cable flat, its good that the psu is side mounted to allow space for a bottom rad but the psu cover should have been full length, the metal panel vent style doesnt look right either with the curved front panel.
I use a Phantek Enthoo pro in white and urban camo and my spare case is a Corsair Air 540 in white and camo that i am using while im doing some hydro-graphics and modding on my Phantek case but i would not swap either for this one.
metagamer
Senior Member
Posts: 2224
Joined: 2018-04-10
Senior Member
Posts: 2224
Joined: 2018-04-10
#5783492 Posted on: 04/28/2020 01:39 PM
I quite like this case but I honestly can't stand the colour.
I quite like this case but I honestly can't stand the colour.
rl66
Senior Member
Posts: 3018
Joined: 2007-05-31
Senior Member
Posts: 3018
Joined: 2007-05-31
#5783522 Posted on: 04/28/2020 03:27 PM
I had the previous one for a time... That wasn't too diferent from this one.
It's a nice chasis but forget it if you want to make a compact dual system, even in total WC it is not able to escape all the heat produced exept with (noisy) full speed fan.
If you want to go dual system in a single box from this company you have to take the upper model PH-ES916E (but this time it is around 1000 Euro) wich is intended for this use.
I had the previous one for a time... That wasn't too diferent from this one.
It's a nice chasis but forget it if you want to make a compact dual system, even in total WC it is not able to escape all the heat produced exept with (noisy) full speed fan.
If you want to go dual system in a single box from this company you have to take the upper model PH-ES916E (but this time it is around 1000 Euro) wich is intended for this use.
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 7754
Joined: 2009-11-13
Such a cool case! I only wish that it was available in white.
And...where is the P500A & Pro II that they announced in Jan?