MS Flight Simulator (2020): the 2021 PC graphics performance benchmark review
Radeon Series RX 6700 XT preview & analysis
Corsair MM700 & Corsair Katar Pro XT Review
Guru3D Rig of the Month - February 2021
ASUS GeForce RTX 3060 STRIX Gaming OC review
EVGA GeForce RTX 3060 XC Gaming review
MSI GeForce RTX 3060 Gaming X TRIO review
PALIT GeForce RTX 3060 DUAL OC review
ZOTAC GeForce RTX 3060 AMP WHITE review
Fractal Design Meshify 2 Compact chassis review
Review: GeForce GTX 1050 3GB (96-bit)
Nvidia recently released a new entry-level SKU into the market, a GeForce GTX 1050 with 3GB graphics memory. In this review, we'll confirm if this product really is a GeForce GTX 1050 Ti, with less memory. If so, that might make these cards an interesting and attractive product to purchase as it has a little more oomph under that hood.
Read our full review right here.
Review: Corsair Strafe RGB MK.2 (silent switches) - 07/05/2018 08:41 AM
In this review, we check out the new Corsair Corsair Strafe RGB MK.2 keyboard. The MK.2 is based on Cherry MX switches and is available in two variants. One has Cherry MX Red switches, the other (the ...
Review: Be Quiet! Dark Base Pro 900 Rev.2 - 07/03/2018 12:02 PM
We review the revision 2 of the Dark Base 900 Pro from be quiet! Their flagship chassis has been updated with a new fan controller, faster Silent Wings 3 fans, a PSU shroud cover, USB 3.1 Gen 2 suppor...
Review: Patriot Viper Gaming RGB (2x8 GB) 3200 MHz DDR4 - 07/02/2018 12:19 PM
We review all-new Patriot Viper Gaming RGB 16 GB (dual channel) 3200 MHz DDR4 RAM kit from yes, you’ve guessed it right - Patriot. It’s not the fastest from this new series, but it...
Review: Noctua NF-A12 and P12 Redux Fan Group Test - 06/29/2018 03:46 PM
Especially our fans and your fans, a review on that new Sterrox based Noctua fan. Well, that and many more newly released ones. Noctua recently released new Sterrox manufactured 120mm fans in a wide r...
Review: Raijintek Leto Pro RGB - 06/28/2018 07:58 AM
In this review, we look at the Raijintek Leto Pro RGB CPU cooler. The unit itself is a dual fan 120mm cooler that sports a relatively slimline single tower heatsink. paired with addressable RGB fans, ...
Hilbert Hagedoorn
Don Vito Corleone
Posts: 40321
Joined: 2000-02-22
Don Vito Corleone
Posts: 40321
Joined: 2000-02-22
#5563072 Posted on: 07/06/2018 02:30 PM
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Or is it just a grasp back to the good old times and we're all getting older and grumpy
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Or is it just a grasp back to the good old times and we're all getting older and grumpy
IchimA
Senior Member
Posts: 1209
Joined: 2008-12-12
Senior Member
Posts: 1209
Joined: 2008-12-12
#5563074 Posted on: 07/06/2018 02:42 PM
Old school HH , but the best was 8800GTX and GTS ... good graphic cards, with a nice bang for buck ... not like now ! 700 - 800 euro for a tier 2 card
Old school HH , but the best was 8800GTX and GTS ... good graphic cards, with a nice bang for buck ... not like now ! 700 - 800 euro for a tier 2 card
rl66
Senior Member
Posts: 2746
Joined: 2007-05-31
Senior Member
Posts: 2746
Joined: 2007-05-31
#5563076 Posted on: 07/06/2018 02:43 PM
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Or is it just a grasp back to the good old times and we're all getting older and grumpy
You are not, i love single slot solution and/or passive... as a WC user i use single slot solution when it is possible.
Also it is more cute.
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Or is it just a grasp back to the good old times and we're all getting older and grumpy
You are not, i love single slot solution and/or passive... as a WC user i use single slot solution when it is possible.
Also it is more cute.
schmidtbag
Senior Member
Posts: 5640
Joined: 2012-11-10
Senior Member
Posts: 5640
Joined: 2012-11-10
#5563078 Posted on: 07/06/2018 02:47 PM
GPUs like this are ideal for ITX builds, and many ITX cases only support 1 slot. Also, some people have a use for all expansion slots available on their motherboard. I have a BOINC rig with 4x GPUs, 1 PCIe wifi card, and a PCI diagnostic card. This would not be possible if it weren't for single-slot cards. Sure, I could maybe use risers or buy aftermarket coolers, but why should I when I don't have to?
Not all - there are plenty of mobos out there with a PCIe x1 slot directly below the x16 slot (or, larger slots when you consider servers and workstations).
I think of this more in a practicality sense:
If you've got a ~50W GPU that can run perfectly cool and quiet as a low-profile single-slot card, why wouldn't you? It's basically universally compatible with all build types. The manufacturer will maximize their market (and therefore profits) if they can accommodate this. So as far as I'm concerned, this is a missed opportunity.
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
GPUs like this are ideal for ITX builds, and many ITX cases only support 1 slot. Also, some people have a use for all expansion slots available on their motherboard. I have a BOINC rig with 4x GPUs, 1 PCIe wifi card, and a PCI diagnostic card. This would not be possible if it weren't for single-slot cards. Sure, I could maybe use risers or buy aftermarket coolers, but why should I when I don't have to?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Not all - there are plenty of mobos out there with a PCIe x1 slot directly below the x16 slot (or, larger slots when you consider servers and workstations).
Or is it just a grasp back to the good old times and we're all getting older and grumpy
I think of this more in a practicality sense:
If you've got a ~50W GPU that can run perfectly cool and quiet as a low-profile single-slot card, why wouldn't you? It's basically universally compatible with all build types. The manufacturer will maximize their market (and therefore profits) if they can accommodate this. So as far as I'm concerned, this is a missed opportunity.
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 5640
Joined: 2012-11-10
It's a good thing they marketed it as a 1050, because that 96-bit memory is pretty crippling. Even when the GPU core is overwhlemed in 4K, the memory still bottlenecks the performance.
I also think they easily could've made this a single-slot GPU. It runs pretty cool, even under full load. Making this a dual-slot reduces the amount of potential cases you could put it in.