Corsair H170i Elite Capellix XT review
Forspoken: PC performance graphics benchmarks
ASRock Z790 Taichi review
The Callisto Protocol: PC graphics benchmarks
G.Skill TridentZ 5 RGB 6800 MHz CL34 DDR5 review
Be Quiet! Dark Power 13 - 1000W PSU Review
Palit GeForce RTX 4080 GamingPRO OC review
Core i9 13900K DDR5 7200 MHz (+memory scaling) review
Seasonic Prime Titanium TX-1300 (1300W PSU) review
F1 2022: PC graphics performance benchmark review
Review: BitFenix Portal mITX chassis
We review the BitFenix Portal Mini ITX chassis. A small form-factor compact chassis with curved looks, high stands and something that can house even the most lengthy graphics card inside the chassis. Yes, it'll house a mere 17x17cm Mini ITX motherboard but can fit a full size double slot graphics card, but how unique of a PC case is this? Let's find out...
Read the review here.
« Tenda offers Affordable AC6 1167Mbps Dual-Band Router · Review: BitFenix Portal mITX chassis
· Nvidia Volta going for 12nm? »
Review: Ryzen 7 1700 processor - 03/14/2017 09:39 AM
It is time to peek at the most affordable Ryzen 7 series eight-core processor, the AMD Ryzen 1700. This puppy costs you only 329 USD and it will tweak 'n clock towards 4 GHz just as well. With proper...
Review: Nvidia GeForce GTX 1080 Ti 11GB - 03/09/2017 04:00 PM
In this article we'll look at the fastest graphics card your money can get you, the Nvidia GeForce GTX 1080 Ti based on Pascal architecture. Armed with 11GB of GDDR5X graphics memory and that all new...
Review: Ghost Recon: Wildlands PC graphics performance review - 03/08/2017 03:45 PM
In this benchmark review we take Ghost Recon: Wildlands for the PC for a test ride. We'll test the game on the PC platform relative towards graphics card performance with the latest AMD/NVIDIA graphi...
Review: Asustor AS6202T Quad Core NAS - 03/07/2017 09:47 AM
Join us as we test the Asustor AS6202T NAS, a vewry powerful solution in the sense that it comes with a much stronger processor, more memory and a plethora of features. The 2 in that product name mean...
Review: AMD Ryzen 7 1800X processor - 03/06/2017 09:34 AM
In this review we take a look at a new Ryzen series processor from AMD. We peek at the Ryzen 7 1800X, a 499 USD processor that has eight cores and 16 threads (SMT). The 8-core processor will be tested...
ubercake
Senior Member
Posts: 214
Joined: 2014-06-11
Senior Member
Posts: 214
Joined: 2014-06-11
#5407329 Posted on: 03/15/2017 09:33 PM
Please my friend check the Bitfenix official website
When in the Portal page click Download Center and there You will see the compatibility list
Thanks!
Please my friend check the Bitfenix official website

When in the Portal page click Download Center and there You will see the compatibility list
Thanks!
TheSarge
Senior Member
Posts: 812
Joined: 2008-06-15
Senior Member
Posts: 812
Joined: 2008-06-15
#5407429 Posted on: 03/16/2017 12:42 AM
The cake is a lie!
The cake is a lie!
LevelSteam
Member
Posts: 90
Joined: 2014-01-14
Member
Posts: 90
Joined: 2014-01-14
#5408713 Posted on: 03/18/2017 04:00 AM
Looks pretty cool. I am really considering this for my next gaming build.
Has anyone found or does anyone know of a SFF PSU that will actually fit in there? Which make/model?
How about a list of aftermarket CPU coolers that will fit?
It would be very helpful if the case manufacturers start producing QVLs/compatibility lists for these Mini-ITX cases (like motherboard manufacturers do for memory on motherboards) so you know which coolers and PSUs will fit.
Seasonic and Corsair both make some decent SFX form factor PSUs, and as far as a low profile CPU coolers, I've had a lot of success with Noctua's NH-L9i and NH-L9x65. For higher TDP CPUs you might want to roll with a more ventilated case though. This one looks great, bit airflow might be a little hard to come by.
With that said, I really love the look of this case. The only things I don't care for is how restricted the airflow seems (sure you can put a 2.5 slot GPU in there, but what are your temps going to be?), and how those front panel connections are actually going to cooperate when you go to push that sled back in. It seems like a better solution would have been to jack all the front panel stuff into a male connection on the mobo sled, then have it rigged to interface with a female connection when it's pushed back in. But that's just my two cents.
Looks pretty cool. I am really considering this for my next gaming build.
Has anyone found or does anyone know of a SFF PSU that will actually fit in there? Which make/model?
How about a list of aftermarket CPU coolers that will fit?
It would be very helpful if the case manufacturers start producing QVLs/compatibility lists for these Mini-ITX cases (like motherboard manufacturers do for memory on motherboards) so you know which coolers and PSUs will fit.
Seasonic and Corsair both make some decent SFX form factor PSUs, and as far as a low profile CPU coolers, I've had a lot of success with Noctua's NH-L9i and NH-L9x65. For higher TDP CPUs you might want to roll with a more ventilated case though. This one looks great, bit airflow might be a little hard to come by.
With that said, I really love the look of this case. The only things I don't care for is how restricted the airflow seems (sure you can put a 2.5 slot GPU in there, but what are your temps going to be?), and how those front panel connections are actually going to cooperate when you go to push that sled back in. It seems like a better solution would have been to jack all the front panel stuff into a male connection on the mobo sled, then have it rigged to interface with a female connection when it's pushed back in. But that's just my two cents.
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 7161
Joined: 2012-11-10
This is a really cool design, and I'm impressed how it can fit such large GPUs in it (my ITX case is shorter, but fatter than this one and is limited to 255mm) and even that is pretty big.
Aside from the fact that this case seems to take up more space than necessary, I'd say my main complaint about it would be the underwhelming air flow. It's certainly not bad, but considering the size of the components it can fit, I think some hotter-running parts might get choked for cool air. I think if this case were slightly smaller (so, intentionally crippling high-wattage things that you can put in it) it would be perfect.