OCZ Vertex 4 Firmware 1.4.1.3 download

by Hilbert Hagedoorn on: 06/12/2012 03:48 PM | source: | 0 comment(s)

OCZ released a new firmware update for their Vertex 4 based SSDs. The new revision 1.4.1.3 solves threefold of things. Normally you can not update the firmware if your SSD is a Windows System drive however you can download this little tool that will allow you to reflash the firmware without any dataloss (make a backup none the less).

If it ain't broke for you, then don't try to fix it.

Enhancement:

Improved RAID card compatibility.

Fixed:

Corner case issue where drive would not resume from S3/S4 properly.
Rare issue where some platforms would not respond correctly after a cold boot.

Download

Related Stories

OCZ Vertex 3 Low Profile SSDs - 05/22/2012 10:08 AM
OCZ has recently unveiled a new line of SSDs called the Vertex 3 Low Profile. Coming in 60GB, 120GB, 240GB and 480GB capacities, these slim 2.5-inch SSDs (7mm thick) are equipped with MLC NAND Flash m...

OCZ Vertex 4 1.4 - 05/22/2012 09:56 AM
A short while ago we wrote an article about OCZ Vertex 4 1.4 firmware. Well it's out for grabs. The new update will bring significant performance increases to the product. If you decide to flash the f...

OCZ Vertex 4 SSD revisited with FW 1.4RC review - 05/08/2012 05:52 AM
We revisit the OCZ Vertex 4 256 and 512GB SSD review, this time with Firmware 1.4 which makes the drives much faster. Armed with a new Indilinx Everest 2 controller this SSD is advertised as one of th...

OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3, RevoDrive 3 2.22 - 04/30/2012 01:15 PM
OCZ issued a series of firmware updates for the OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3 and RevoDrive 3 bringing the firmware towards version 2.22 Issues resolved: Fixed a rare condition ...

OCZ Vertex 4 SSD 256GB and 512GB review - 04/05/2012 05:16 AM
We review the OCZ Vertex 4 256 and 512GB SSD. Armed with a new