NVIDIA Releases Firmware Update Tool To Support DisplayPort 1.3 and 1.4 Displays

by Hilbert Hagedoorn on: 06/06/2018 08:17 AM | source: | 43 comment(s)

Nvidia is now allowing you to update GPUs with a firmware to enable HDR color accuracy. That might come in pretty handy for people who are on the lookout for the upcoming ACER/ASUS HDR Gsync 144hz monitors.

The firmware allows 10 and 12 bit per channel signal output when an HDR “signal” is detected. The DisplayPort 1.3 and 1.4 specifications provide enhanced display capabilities. To ensure compatibility with these specifications, an update to the NVIDIA graphics firmware may be required. Without the update, systems that are connected to a DisplayPort 1.3 / 1.4 monitor could experience blank screens on boot until the operating system loads, or could experience a hang on boot.

Applicable Graphics Cards

NVIDIA TITAN Series:

TITAN X (Maxwell), TITAN X (Pascal), TITAN XP

GeForce 10 Series:

GeForce GT 1030, GeForce GTX 1050, GTX 1050Ti, GTX 1060, GTX 1070, GTX 1070Ti, GTX 1080, GTX 1080Ti

GeForce 900 Series:

GeForce GTX 950, GTX 950Ti, GTX 960, GTX 970, GTX 980, GTX 980Ti

GeForce 700 Series:

GeForce GTX 745, GTX 750, GTX 750Ti

Quadro Series:

Quadro GP100, Quadro P6000, Quadro P5000, Quadro P4000, Quadro P2000, Quadro P1000, Quadro P620, Quadro P600, Quadro P400, Quadro M6000 24GB, Quadro M6000, Quadro M5000, Quadro M4000, Quadro M2000, Quadro K2200, Quadro K1200, Quadro K620, NVS 810

NVIDIA has created a downloadable tool which will detect whether the firmware update is needed, and if needed, give the user the option to update it. This update only applies to the graphics cards listed above. For desktop systems, please follow the link below to download the NVIDIA Graphics Firmware Update Tool.

http://www.nvidia.com/object/nv-uefi-update.html

Installation - I've walked through the setup processes. Have a peek at the screenshots below as to what you can expect.

Related Stories

NVIDIA Ray-Tracing coming to the Vulkan API - 05/08/2018 07:52 AM
Ray-Tracing certainly has become a trendy thing to talk about in the year 2018, though we're still years away for the real thing as GPUs simple are not powerful enough unless you have to say three V...

NVIDIA today announces NVIDIA Quadro GV100 GPU with NVIDIA RTX technology, - 03/27/2018 05:41 PM
NVIDIA today announced the NVIDIA Quadro GV100 GPU with NVIDIA RTX technology, delivering for the first time real-time ray tracing to millions of artists and designers....

Metro Exodus - NVIDIA RTX Real-Time Raytracing Demo - 03/23/2018 04:21 PM
4A Games has released a tech demo video for Metro: Exodus, is shows early implemented NVIDIA RTX real-time raytracing effects. It using raytracing for Global Illumination and ambient occlusion, in rea...

Nvidia reduces price of regular GeForce GTX 1070 - 10/30/2017 08:52 AM
With the GeForce GTX 1070 Ti being released/available seems to have the effect of a price reduction for other cards. From the looks of it, the regular GTX 1070 has now dropped towards $329 and $399 f...

NVIDIA Recalls European Plug Heads Sold with Shield Tablet and TV box - 08/09/2017 01:44 PM
Nvidia received a number of report where users mentioned it is possible to break the power plug of the European adapter from its Shield tablets and Shield boxes (Android TV box). And that could result...

3 pages 1 2 3

nevcairiel
Senior Member

Posts: 612
Joined: 2015-05-19

#5554028 Posted on: 06/06/2018 10:56 AM

I'm hoping they will be able to do something like this for HDMI 2.1 support.

The big feature of HDMI 2.1 is increased bandwidth so we can finally do 4k@60Hz 10/12-bit (or even higher refresh) without quality loss. You can't patch that into firmware - well, unless their HDMI transceivers are already designed for much higher bandwidth then HDMI 2.0 uses, but I personally doubt that.

I just hope the next gen of cards comes with full HDMI 2.1 support, that would be enough for me. It would suck if they don't include it yet just because no TVs support it yet. Someone has to do the first step, so don't lag behind NVIDIA!

dragonlord
Senior Member

Posts: 133
Joined: 2005-02-17

#5554080 Posted on: 06/06/2018 01:51 PM

I'm getting a 404 error when I try to download the file itself from the Nvidia site linked here. Is this just me or are they down now for some reason?

Update: I was able to download with Firefox, but not with Chrome or Edge. Just in case anyone else runs into the same problem I did.

Update 2: Both of the cards that needed the bios fix were successfully updated.

HonoredShadow
Senior Member

Posts: 4266
Joined: 2007-05-27

#5554095 Posted on: 06/06/2018 02:40 PM

I assume this only modifies a part of the firmware? Because 3rd-party boards have different firmwares (factory OCing, different fan speeds and whatnot.)

And can you roll back if something doesn't work correctly after the update?
I would like to know the answer to this also as my MSI factory OC 980Ti says I have an update.

dfsdfs1112
Member

Posts: 70
Joined: 2016-08-27

#5554111 Posted on: 06/06/2018 02:59 PM

Buy a lousy LCD screen size 29 "- / +
Today is a joke.

you have QLED 55/65 " 4K + 1080P120FPS
FreeSync +VA panl + HDR 2000nits + 15ms in the game mode. It is expected to be “less than 7 ms” in VRR mode.+
HDR (HDR10, HDR10+, HLG) + ++++

wavetrex
Senior Member

Posts: 640
Joined: 2008-07-16

#5554128 Posted on: 06/06/2018 03:46 PM

Uhkay, it's updated.
Computer didn't break.

I'm still lonely and miserable.
This wasn't the miracle cure for all life's problems. Sad.

cryohellinc
Senior Member

Posts: 2710
Joined: 2014-10-20

#5554134 Posted on: 06/06/2018 04:03 PM

Also updated, all seems good.

lucasfrance
Member

Posts: 33
Joined: 2017-04-07

#5554183 Posted on: 06/06/2018 05:37 PM

For cards with dual bios, does it update both bios or the standard one only ???

davido6
Senior Member

Posts: 1408
Joined: 2006-05-25

#5554217 Posted on: 06/06/2018 07:32 PM

said needed it but failed doing so

Neo Cyrus
Senior Member

Posts: 9240
Joined: 2006-02-14

#5554306 Posted on: 06/07/2018 01:49 AM

MSI Afterburner didnt work after i updated.
*edit.
I reinstalled msi afterburner and it worked again
MSI Afterburner appears to be fine for me after updating.

Edit: Nevermind, it's gone full retard and my clocks are screwed.

Reinstalling fixed it, clocks were locked at 1884MHz then re-applying my settings locked it to 1600MHz, weird. After re-installation it shows as 2012MHz which is within normal range for my settings.

maize1951
Senior Member

Posts: 238
Joined: 2011-09-30

#5554307 Posted on: 06/07/2018 01:54 AM

It makes a GTX 970 into a GTX 1070, right?

toyo
Member

Posts: 94
Joined: 2008-10-15

#5554320 Posted on: 06/07/2018 04:49 AM

It said my 1070ti has an "already updated" firmware. It's still the default original Gigabyte Vbios, they never released any updates, strangely, so they must have been coded everything perfectly the very first try /s
Although I only wanted to see if I needed the update, since I don't have an HDR monitor, doubt I'll ever buy into that until it's as mainstream as LED, for example.

zimzoid
Senior Member