Lian Li Offers UNI FAN SL INFINITY 120

Published by

teaser

Lian Li introduces the new UNI FAN SL-INF 120 series of fans, available in black or white, singularly or as a pack of three. These new fans offer improved performance and a redesigned aesthetic with an infinity mirror and 40 addressable LEDs. 



The Lian Li UNI FAN SL-INF 120 has been refined with improved cable design for easier management and a cleaner set-up. Power and light cables have been combined into a single cable with 7 pin connector which can be connected to the new UNI HUB, available with the triple packs. Single packs also include a split cable which features both a 4-pin PWM and 3-pin ARGB header allowing direct connection to the motherboard. Daisy chaining has also been reconfigured to allow the connection key to be easily removed using a twist and pull motion and can just as easily be reinstalled when needed. By easily being able to remove the key it allows for better compatibility with radiators and provides a sleeker set up and avoid anything projecting or obstructing. The cable module has also been repositioned to fit centrally on the edge of the fan frame and is also smaller in size compared to previous models. It can also be placed in numerous positions to meet the needs of the build.

UNI HUB and L-Connect 3
The new and improved UNI HUB controller has been redesigned to offer greater support for other Lian Li ARGB devices, with two additional 3-pin ARGB SM ports, as well as support for up to sixteen UNI Fans across four ports. As standard the UNI FAN SL-INF 120 triple pack comes supplied with the UNI HUB controller.
Both lighting and fans can be controlled through Lian Li’s L-Connect 3 software, or via motherboard software when using single fans. By using the L-Connect 3 software, it is possible to set fan speeds or specific modes for each individual port. Lighting can also be customized in a variety of ways with 16.8 million colours and over 30 effects to choose from, as well as the ability to assign effects to the centre of the fan, the edge or both. The L-Connect 3 and UNI FAN SL-INF 120 combined offer great flexibility when it comes to both performance and the appearance and allow the fans to be customised to meet the needs of the user.


Improved UNI FAN Concept
With the SL INFINITY 120, LIAN Li makes improvements with removable interlocking keys on the side of the fan for better clearance with radiator fittings. The power module is now centered on the fan frame and has been revised to allow the cable to be flipped 180 degrees, to always be oriented towards the rear of the case. Lastly, the ARGB and PWM cables that connect to the UNI HUB controller have been combined into a single one, clearing cable clutter even further.

Better Performance
The SL INFINITY 120 features a 10% performance improvement compared to the SL120 which results in better airflow (61.3 CFM), higher static pressure (2.66 mmH2O), and a wider range of fan speed (0 ~ 2100RPM) at lower noise levels (29 dBA). First time introduced in the UNI FAN line-up, the SL INFINITY 120 can be stopped completely for the ultimate silent build. This feature is supported by L-Connect's redesigned fan curve interface via the Start/ Stop mode which allows RPM to be set to 0 when the CPU or GPU is running below 50°C.

The black/white UNI FAN SL INFINITY 120 is available for pre-order starting June 17th, at an MSRP of $99.99 (USA)/$94.99 (global) for 3 fans with controller bundle pack, and $29.99 (USA and global) for the single fan pack (controller not included).


SLIN120-3B

SLIN120-1B

SLIN120-3W

SLIN120-1W

Colour

Black

White

Fan Size

120mm x 122.1mm x 25mm

Number of Fans

3

1

3

1

Controller Included

Yes

No

Yes

No

Material

PBT/PC/Aluminium

Rated Voltage

DC 12V (Fan) 5V (LED)

Fan Speed

0 – 2100 RPM

Fan Noise

29 dBA

Air Pressure

2.66 mmH20 (Maximum)

Air Flow

61.3 CFM (Maximum)


Share this content
Twitter Facebook Reddit WhatsApp Email Print