KLEVV releases CRAS C710 NVMe M.2 SSDs, equipped with LDPC ECC engine and wear-leveling technology. These are PCIe Gen 3.0 units running in a 2 GB/sec range.
Improve reliability and durability with "LDPC ECC engine" that prevents data loss during high-speed data transfer, "Global wear leveling" that extends the durability of NAND flash, and a "Thermal control algorithm" that suppresses temperature rise New product of NVMe M.2 SSD.
The bus interface is PCI-Express3.0 (x4), the controller is SMI "SM2263XT", the NAND flash is 3D TLC, and the cache technology adopts the SLC cache algorithm. Transfer rate is up to 2,100 MB / sec for sequential reading and 1,650 MB / sec for writing. The capacity lineup consists of 256GB, 512GB, and 1TB models. The form factor is M.2 2280, the body size is 22mm wide, 80mm deep, 2.2mm thick and weighs 7g. The product warranty is 5 years. The 256 GB model costs roughly 50 USD.
| Host Interface | NVMe PCle Gen3 x4 | ||
|---|---|---|---|
| Form Factor | M.2 2280 | ||
| Controller | SMI SM2263XT | ||
| Flash | 3D TLC NAND | ||
| Dimension (L x W x H) | 80 x 22 x 2.2 mm | ||
| Weight | 7g | ||
| Warranty | 5 Year Warranty | ||
| READ / WRITE | 256GB | 512GB | 1TB |
| Sequential Read (MB/s) | 1,950MB/s | 2,050MB/s | 2,100MB/s |
| Sequential Write (MB/s) | 1,250MB/s | 1,650MB/s | 1,650MB/s |
KLEVV releases CRAS C710 NVMe M.2 SSDs
