Guru3D.com
  • HOME
  • NEWS
    • Channels
    • Archive
  • DOWNLOADS
    • New Downloads
    • Categories
    • Archive
  • GAME REVIEWS
  • ARTICLES
    • Rig of the Month
    • Join ROTM
    • PC Buyers Guide
    • Guru3D VGA Charts
    • Editorials
    • Dated content
  • HARDWARE REVIEWS
    • Videocards
    • Processors
    • Audio
    • Motherboards
    • Memory and Flash
    • SSD Storage
    • Chassis
    • Media Players
    • Power Supply
    • Laptop and Mobile
    • Smartphone
    • Networking
    • Keyboard Mouse
    • Cooling
    • Search articles
    • Knowledgebase
    • More Categories
  • FORUMS
  • NEWSLETTER
  • CONTACT

New Reviews
Be Quiet! Pure Power 12 M - 850W ATX 3.0 PSU review
Corsair H170i Elite Capellix XT review
Forspoken: PC performance graphics benchmarks
ASRock Z790 Taichi review
The Callisto Protocol: PC graphics benchmarks
G.Skill TridentZ 5 RGB 6800 MHz CL34 DDR5 review
Be Quiet! Dark Power 13 - 1000W PSU Review
Palit GeForce RTX 4080 GamingPRO OC review
Core i9 13900K DDR5 7200 MHz (+memory scaling) review
Seasonic Prime Titanium TX-1300 (1300W PSU) review

New Downloads
GeForce 528.49 WHQL driver download
Intel ARC graphics Driver Download Version: 31.0.101.4123
FurMark Download v1.33.0.0
Corsair Utility Engine Download (iCUE) Download v4.33.138
CPU-Z download v2.04
AMD Radeon Software Adrenalin 23.1.2 (RX 7900) download
GeForce 528.24 WHQL driver download
Display Driver Uninstaller Download version 18.0.6.0
Download Intel network driver package 27.8
ReShade download v5.6.0


New Forum Topics
RTX 4090 Owner's thread GeForce RTX 4060 would be equivalent to an RTX 3070 Ti in performance MSI AB / RTSS development news thread Ambient Occlusion doesn't work on my laptop White 27-inch WQHD Gaming Monitors from MSI NVIDIA GeForce 528.49 WHQL driver Download & Discussion 13900k owners, do you still oc? The AMD Ryzen All In One Thread /Overclocking/Memory Speeds & Timings/Tweaking/Cooling Part 2 Windows power plan settings explorer utility AMD Confirms Strategy of Restraining Chip Supply to Maintain High CPU and GPU Prices




Guru3D.com » News » Jonsbo Releases UMX 5 Mid Tower Chassis

Jonsbo Releases UMX 5 Mid Tower Chassis

by Hilbert Hagedoorn on: 12/04/2017 10:00 AM | source: | 0 comment(s)
Jonsbo Releases UMX 5 Mid Tower Chassis

The UMX5 is the current flagship of Jonsbo's popular UMX series. The spacious Midi Tower relies on the proven combination of a steel chassis for maximum stability and an extravagantly designed exterior in aluminum.

The noble exterior made of high-quality aluminum automatically attracts attention. The raised fins made of 5.5 mm thick aluminum are polished while the indentations were dulled using a sandblasting process. The individual ribs stand out clearly - this not only looks extremely elegant, it also adds to the design and gives the UMX5 superior stability.

The I/O panel is recessed in the front and houses two USB 3.0 and two USB 2.0, as well as audio connections, the power button and the RGB color change button for controlling the integrated LED elements. Both sides are made of tempered glass and embedded in a frame of painted steel. For optimal air exchange this frame comes with MESH elements all around.

A design highlight of the case is undoubtedly the boldly designed "case foot". Between the underside of the chassis and the "foot" there is a 3.5 cm high recess. An advantage of this design: The internally mounted fans can freely suck in fresh air for optimal cooling of the system. The UMX5 has two RGB LED strips underneath the case bottom, which optimally illuminate this "ventilation chamber". Another design element can be found inside the case in the form of a glass cover in front of the power supply and the HDD bays. This is traversed with honeycomb pattern, which is also lit with RGB LED; centrally located is the illuminated Jonsbo logo. A real ray of light, which gives the case a very special flair.

The LEDs can be controlled via the color change switch integrated in the I/O panel. The following modes are available: Color change with 264 different colors. Monochromatic lighting in red, blue, green, white, yellow, purple, pink, turquoise and orange; Breathing (only red); finally, the LED lighting can also be completely switched off.

Like the exterior, the interior of the case is designed in an especially innovative way. The power supply is installed in a specially designed frame behind the front of the housing to save space - extensive cable management allows a clean laying of the cables. The power connection can be found at the rear of the case, a corresponding cable for looping through the power is pre-installed.

Below the power supply there are four mounting slides for hard disks. These are made of red anodized aluminum on the UMX5 and accept both 3.5 inch and 2.5 inch drives. The slides are fixed with thumbscrews and can be removed individually. Two additional 2.5 inch drives can be mounted at the rear of the motherboard tray. 

The UMX5 is ideally suited to accommodate a high-end system with powerful hardware. To supply this system with sufficient fresh air, up to five case fans can be installed. A 120 mm fan is already preinstalled on the back of the case, two 120 mm fans can also be installed on the floor and under the lid.

The fans are attached to mounting frames, which can be removed from the case for installation. A special feature is the fan mounting on the bottom. Here it is possible to attach the fans to the underside of the frame and thus between the floor and the mounting frame - a practical alternative especially when installing a radiator. The distance between the bottom and the underside of the frame is approx. 35 mm.

Thanks to the MESH elements in the frame, the fans can suck in air from the outside all the time. In the floor, there is a generous recesses below the fan mounts, which is equipped with a magnetic dust filter from the outside. This ensures a continuous exchange of air without the user having to worry about dust in the system.

If you want to equip your system with water cooling, you can also install a 240 mm radiator under the case top. The distance to the mainboard is about 65 mm, which allows the installation of thicker radiators. When installing a radiator at the bottom, it is advisable to mind the distance to the mainboard, otherwise it may otherwise be possible to collide with an extension card in the lowest slot. 

At the rear, a total of eight PCI expansion slots are available. Depicted hardware is not included.



Jonsbo Releases UMX 5 Mid Tower Chassis Jonsbo Releases UMX 5 Mid Tower Chassis Jonsbo Releases UMX 5 Mid Tower Chassis Jonsbo Releases UMX 5 Mid Tower Chassis




« X2 releases PIRATE 1620 chassis · Jonsbo Releases UMX 5 Mid Tower Chassis · Reeven Reelases NAIA 240 liquid cooler Released (LCS) »

Related Stories

Jonsbo releases TW120 and TW240 AIO liquid cooling series - 09/11/2017 08:50 AM
Jonsbo has released a new AIO liquid cooling series, with a pretty unique looking block/pump and of course, RGB. Jonsbo will be releasing a 120 and 240mm version of their TW120 and TW240 AIO liquid c...

Jonsbo Releases C4 and C4S Series Chassis - 07/26/2017 08:41 AM
C4 is launched by JONSBO team in late 2017 positioning in the luminous ATX case and tempered glass side panels. The shell is made from 1.5mm plate, there are baking varnish steel and aluminum-magnesiu...

Jonsbo releases MOD1 - MOD1-MINI and VR1 PC Chassis - 08/26/2016 09:04 AM
The MOD1, MOD1-MINI and the VR1 are high-quality cases that use a combination of aluminum and tempered glass to achieve an outstanding look. Where the MOD1 and MOD1-Mini are aimed primarily at water c...


Post New Comment
Click here to post a comment for this news story on the message forum.


Guru3D.com © 2023