Corsair M65 RGB Ultra mouse review
Asus ROG STRIX XG43UQ monitor review
Netduma R2 router review
TerraMaster F5-422 NAS Review
Radeon RX 6600 (Sapphire Pulse) review
Radeon RX 6600 (Gigabyte Eagle 8G) review
PowerColor Radeon RX 6900 XT Red Devil review
Corsair Sabre RGB Pro Wireless mouse review
Far Cry 6: PC graphics performance benchmark review
Colorful GeForce RTX 3060 Bilibili 12G review
Inno3D GeForce GTX 1080 iChill Black
Inno3D introduces its new flagship Inno3D GeForce GTX 1080 iChiLL BLACK. The iChiLL BLACK edition stands for Hybrid cooling solution that combines super-silent air-flow with water-cooling.
Taking place at the absolute top-of-the-hill, the latest descendant of INNO3D's GeForce GTX 1080 high-end graphics card family, comes with 8GB GDDR5X at a bit-rate of 256bit and a core clock rate at 1759MHz. The DVI, DP and HDMI ports enables the gamer to connect with up to three screens for the ultimate gaming experience.
"We're aiming to satisfy the enthusiast gamer who has ridiculous demands and with our iChiLL BLACK edition they get the Brute among High-End Graphics Cards" states Stanley Wong, Managing Director at INNO3D. "The Hybrid cooling solution makes it possible to squeeze every single drop of performance out of the highest performing components. It not only results in an awesome performing product, it also runs at extremely low noise levels."
The INNO3D GeForce GTX 1080 iChiLL BLACK edition has been designed to run the highest and most demanding software, including the upcoming Virtual Reality games and applications.
At launch, products will be immediately available on sale at top-resellers across every region. For local pricing please check with your local supplier.
For more information, visit the product page.
Inno3D GeForce GTX 1080 Graphics Cards - 05/27/2016 03:26 PM
InnoVISION Multimedia Limited, a leading manufacturer of high-end hardware components and computer utilities, introduces its new line of Inno3D GeForce GTX 1080 graphics cards. The new flagship will b...
Inno3D GeForce GTX 960 OC and iChill GeForce GTX 960 Ultra - 01/13/2015 07:34 PM
At the Denmark distributor mm-distribution the GeForce GTX 960 cards from Inno3D surfaced in their online presence. Both the cards listed are the Inno3D GeForce GTX 960 OC and iChill GeForce GTX 96...
Inno3D GeForce GTX 780 Ti iChill DHS 3072MB - 03/06/2014 09:26 AM
Introducing the Inno3D GeForce GTX 780Ti iChill DHS 3072MB, the fastest out the box graphics card. Boasting Equipped with all new voltage management, including 3 rail PWMs with load balancing, the GTX...
Exclusive Inno3D GeForce GTX 780 iChill HerculeZ X3 Ultra DHS Edition - 11/01/2013 03:41 PM
The Inno3D GeForce GTX 780 iChill HerculeZ X3 Ultra DHS Edition graphics card isn't just your ordinary GTX 780. The graphics card uses heavily tested, double hand selected (DHS) GPU chips to ensure a...
Inno3D GeForce GTX 770 iChill HerculeZ X3 Ultra gets reviewed - 07/13/2013 08:38 AM
So you want to witness a review on the beast, the big kahuna ? Well look no further as we review the Inno3D GeForce GTX 770 iChill HerculeZ X3 Ultra. This GTX 770 from Inno3D is armed and ready to fi...
fry178
Senior Member
Posts: 1738
Joined: 2012-04-30
Senior Member
Posts: 1738
Joined: 2012-04-30
#5332660 Posted on: 09/08/2016 11:42 PM
Unless they bin the chips, and "you" have high temps inside the case, wc a 1000 series card is pretty much useless, since Nv limits will determine max clocks.
I have basically room temp +10*F inside my case, and my 1060 will boost to 2025 without added volt/mhz, and max boost is 2100 when adding 80mhz to core, while card uses up to 80% power and stays at 60*C while silent.
Unless they bin the chips, and "you" have high temps inside the case, wc a 1000 series card is pretty much useless, since Nv limits will determine max clocks.
I have basically room temp +10*F inside my case, and my 1060 will boost to 2025 without added volt/mhz, and max boost is 2100 when adding 80mhz to core, while card uses up to 80% power and stays at 60*C while silent.
cryohellinc
Senior Member
Posts: 3407
Joined: 2014-10-20
Senior Member
Posts: 3407
Joined: 2014-10-20
#5332780 Posted on: 09/09/2016 08:55 AM
Unless they bin the chips, and "you" have high temps inside the case, wc a 1000 series card is pretty much useless, since Nv limits will determine max clocks.
I have basically room temp +10*F inside my case, and my 1060 will boost to 2025 without added volt/mhz, and max boost is 2100 when adding 80mhz to core, while card uses up to 80% power and stays at 60*C while silent.
I would say right off the bat that 60c is a lie, it would be absolutely higher than that. Secondly I assume you use 1080p monitor, at 60hz, and without gsync?
Make it 1440p or 4k, instantly +10/+15 degree on top, add 144hz, instantly +3-5c, add gsync, instantly +2-3c, and you would hover around 70-75c in games on max settings without FPS cap.
Make any card SLI and you run at another extra 5-10c. Hence Yes WC any card DOES make sense, especially for people like me that like things smooth, cool and long lasting with stable clock rates.
All those stories about "bla bla my card runs at 90c and its FINE" is not fine. I personally had gtx680 burn down after couple of days playing Tomb Raider 2013 back in the day on 86c. Had AMD cards burn down after working at 85c while rendering (AMD never again). Or two 670's in SLI that i had on which one card (lower one which was even cooler) just stopped working. Literally just died during rendering. And then you spend days or weeks RMA'ing and wasting time and money.
And no those cards weren't stock blower cards, all of them are always fancy two-three fan ones, however it doesnt matter, they are all still Bad at cooling. Because they cant keep your GPU cool.
Unless they bin the chips, and "you" have high temps inside the case, wc a 1000 series card is pretty much useless, since Nv limits will determine max clocks.
I have basically room temp +10*F inside my case, and my 1060 will boost to 2025 without added volt/mhz, and max boost is 2100 when adding 80mhz to core, while card uses up to 80% power and stays at 60*C while silent.
I would say right off the bat that 60c is a lie, it would be absolutely higher than that. Secondly I assume you use 1080p monitor, at 60hz, and without gsync?
Make it 1440p or 4k, instantly +10/+15 degree on top, add 144hz, instantly +3-5c, add gsync, instantly +2-3c, and you would hover around 70-75c in games on max settings without FPS cap.
Make any card SLI and you run at another extra 5-10c. Hence Yes WC any card DOES make sense, especially for people like me that like things smooth, cool and long lasting with stable clock rates.
All those stories about "bla bla my card runs at 90c and its FINE" is not fine. I personally had gtx680 burn down after couple of days playing Tomb Raider 2013 back in the day on 86c. Had AMD cards burn down after working at 85c while rendering (AMD never again). Or two 670's in SLI that i had on which one card (lower one which was even cooler) just stopped working. Literally just died during rendering. And then you spend days or weeks RMA'ing and wasting time and money.
And no those cards weren't stock blower cards, all of them are always fancy two-three fan ones, however it doesnt matter, they are all still Bad at cooling. Because they cant keep your GPU cool.
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 3407
Joined: 2014-10-20
Quite an unsuccessful branding combination.