ID-Cooling Hunter Duet AIO Cooler for both CPU and GPU

by Hilbert Hagedoorn on: 07/21/2015 09:07 AM | source: | 4 comment(s)

ID-COOLING releases an integrated AIO water cooler for CPU & GPU with one radiator two pumps design, named HUNTER DUET. Along with this cooler, ID-COOLING is going to launch a full product line of water cooling under FROSTFLOW series.

HUNTER DUET is equipped with a 240mm radiator mounted with a pair of SF-12025 high static pressure fans. Fan speed is PWM controlled from 800 to 2000RPM, pushing max. airflow of 84.5CFM each. On four corners are mounted with rubber dampeners to absorb operating vibration.

The pumps are designed with comet-tail LED lighting on the top. Bearing type is Ceramic bearing and the pump speed is set at 2500RPM. Copper base contacts CPU/GPU to help the heat transfer. Micro fin submerged design increases the heat dissipation surface. The dimension of the whole water block is Ф65×36mm.

EPDM Rubber tubes connected water blocks and radiator together. From CPU water block to GPU block, tube length is 250mm; GPU to radiator, 380mm; radiator to CPU, 250mm. Inside tubes is self-contained highly efficient and eco-friendly liquid coolant.

Universal mounting brackets are included. HUNTER DUET is compatible with (CPU) Intel LGA2011/1366/1150/1155/1156/775 & AMD FM2+/FM2/FM1/AM3(+)/AM2(+). For GPU, the mounting kit supports mounting holes 58.4*58.4mm; 53.3*53.3mm; 51*61mm.

The MSRP for HUNTER DUET is $139.99.

Related Stories

ID-Cooling Offers Vapor Chamber CPU Cooler for Mini-ITX Systems - 01/19/2015 03:20 PM
ID-COOLING, a cooling solution provider focusing on thermal dissipation and fan technology research and production for over 10 years, releases a newly developed Vapor Chamber CPU Cooler for Mini-ITX s...

ID-Cooling T60-SFX Mini Gaming Case - 08/21/2014 05:14 PM
ID-COOLING releases the second Mini Case T60-SFX in the Mini-ITX Series. As an old manufacturer of cooling products, ID-COOLING developed V.C.V.P. technology for CPU Coolers. Silencer-ITX is their fir...

TheDeeGee
Senior Member

Posts: 8866
Joined: 2010-08-28

#5126170 Posted on: 07/21/2015 10:00 AM

I wish people luck when they have to replace their GPU or Motherboard

Twiddles
Senior Member

Posts: 1155
Joined: 2013-11-15

#5126213 Posted on: 07/21/2015 11:43 AM

Just a matter of four more screws

I think the extra cooling outweighs the need of near hot-swap. Looks very good, should give the GPU a lot of headroom/low temps IF the VRM's are cooled enough!

zimzoid
Senior Member

Posts: 1442
Joined: 2004-09-06

#5126657 Posted on: 07/22/2015 12:31 AM

Interesting.. I wonder what gpus it would work best with?

PeteBeMe
Member

Posts: 30
Joined: 2014-12-27

#5126757 Posted on: 07/22/2015 05:40 AM

I do like that it is (the first?) AIO liquid cooler for both CPU and GPU. Don't think I like the one-fits-lots GPU waterblock implementation, maybe you will get little stick on air heatsinks for GPU RAM and VRMs. I didn't see a refill port like the Raijintek Triton or Swiftech H240-X either.

Post New Comment

Click here to post a comment for this news story on the message forum.