Netac NV7000 2 TB NVMe SSD Review
ASUS GeForce RTX 4080 Noctua OC Edition review
MSI Clutch GM51 Wireless mouse review
ASUS ROG STRIX B760-F Gaming WIFI review
Asus ROG Harpe Ace Aim Lab Edition mouse review
SteelSeries Arctis Nova Pro Headset review
Ryzen 7800X3D preview - 7950X3D One CCD Disabled
MSI VIGOR GK71 SONIC Blue keyboard review
AMD Ryzen 9 7950X3D processor review
FSP Hydro G Pro 1000W (ATX 3.0, 1000W PSU) review
High-Speed DDR5-6400 low latency CL32 Kit from G.SKILL is now available
G.SKILL is very excited to be releasing the DDR5-6400 CL32 32GB (2x16GB) memory kit. It's already in stores.
G.SKILL is delighted to announce the launch of an extremely low-latency, high-speed DDR5-6400 CL32 32GB (2x16GB) memory kit under the Trident Z5 family memory series, designed for the latest 12th Gen Intel® Core™ desktop processors and Intel® Z690 chipset motherboards.
Extreme Low Latency CL32 at DDR5-6400
Dedicated to developing ever-faster memory modules, G.SKILL is launching an ultra-low latency DDR5-6400 CL32-39-39-102 memory kit at 1.40V with 32GB (2x16GB) kit capacity. Equipped with exceptionally tight timings, this extreme memory specification represents the next step of the Trident Z5 family flagship performance. The screenshot below shows this memory kit validated on the Intel® Core™ i7-12700K processor and ASUS ROG Maximus Z690 Hero motherboard.
Availability
The DDR5-6400 CL32 32GB (2x16GB) memory kits under the Trident Z5 and Trident Z5 RGB series is available now via G.SKILL worldwide distribution partners.
iiyama introduces two game LCDs that allow high-speed drawing at a rate of 165Hz / 0.5ms. - 09/15/2021 08:44 AM
Manufactured by the iiyama brand and has a refresh rate of 165Hz and response time of 0.5ms, making it prototypical for gaming. The LCD panel in both cases is a non-glare IPS system, and they are bot...
With PCIe Gen 5.0 Components, Phison Enters the High-Speed IC Market - 08/12/2021 08:53 AM
Phison entered into the high-speed interface IC market with the introduction of its PS7101, a PCIe 5.0 Redriver IC with high gain and high linearity, which solves the signal attenuation caused by the ...
PNY adds 4,00MHz ultra-high-speed model to XLR8 Gaming EPIC-X RGB OC memory - 07/23/2021 08:48 AM
A high clock frequency model has been added to the DDR4 overclocking memory "XLR8 Gaming EPIC-X RGB" equipped with an illumination function using addressable RGB LEDs....
TEAMGROUP Launches the High-speed T-FORCE CARDEA Z44Q PCIe4.0 SSD with up-to 4 TB Capacity - 06/24/2021 09:46 AM
TEAMGROUP unveils the T-FORCE CARDEA Z44Q PCIe4.0 SSD with two patented cooling modules, QLC Flash, and PCIe Gen4x4 interface that supports the latest NVMe1.4 standard and provides a massive capacity ...
Glorious "Model D Wireless", a high-speed wireless mouse - 06/03/2021 08:18 AM
Glorious Model D Wireless, a high-speed wireless mouse with a 69g lightweight body and low-latency sensor....
MegaFalloutFan
Senior Member
Posts: 1008
Joined: 2015-06-27
Senior Member
Posts: 1008
Joined: 2015-06-27
#5987540 Posted on: 01/28/2022 12:26 AM
I have such kit sealed, its Micron, all cheap DDR5 is Micron, if you buy 5200 or lower its 98% Micron. BUT it should work fine at rated speed, even slight OC
With DDR5 many boards have had such issue but most if not all received bios updates with ram fixes, Gigabyte had the WORST compatibility among all , but they already released 4 bioses, so everything is fixed, if you still on OG bios no matter whos the board maker, get updated
my ADATA 32GB (2x16GB) 5200MHz CL38 XPG Lancer is running at 4800 CL 40 which is the fastest i could reach stable, nothing above that works not even at 1.4V
I have such kit sealed, its Micron, all cheap DDR5 is Micron, if you buy 5200 or lower its 98% Micron. BUT it should work fine at rated speed, even slight OC
With DDR5 many boards have had such issue but most if not all received bios updates with ram fixes, Gigabyte had the WORST compatibility among all , but they already released 4 bioses, so everything is fixed, if you still on OG bios no matter whos the board maker, get updated
MegaFalloutFan
Senior Member
Posts: 1008
Joined: 2015-06-27
Senior Member
Posts: 1008
Joined: 2015-06-27
#5987541 Posted on: 01/28/2022 12:27 AM
It is Hynix
My 5600c36, 6000c40 and 6000c36 is samsung. 6400c32 is confirmed Hynix.
9276
Samsung taps out about ~6400mhz with abit "loose" timings, like c36. Still hard to get memtest stable. Pretty good, but still "far" behind Hynix.
So is it a good investment? will it OC? Im still considering, if i buy it ill have to sell two new kits that i have XPG 5200 and Gskill RGB 6000/36
Do you know about any people on that forum with such kits?
It is Hynix
My 5600c36, 6000c40 and 6000c36 is samsung. 6400c32 is confirmed Hynix.
9276
Samsung taps out about ~6400mhz with abit "loose" timings, like c36. Still hard to get memtest stable. Pretty good, but still "far" behind Hynix.
So is it a good investment? will it OC? Im still considering, if i buy it ill have to sell two new kits that i have XPG 5200 and Gskill RGB 6000/36
Do you know about any people on that forum with such kits?
Raider0001
Senior Member
Posts: 510
Joined: 2006-11-25
Senior Member
Posts: 510
Joined: 2006-11-25
#5987544 Posted on: 01/28/2022 12:38 AM
I have such kit sealed, its Micron, all cheap DDR5 is Micron, if you buy 5200 or lower its 98% Micron. BUT it should work fine at rated speed, even slight OC
With DDR5 many boards have had such issue but most if not all received bios updates with ram fixes, Gigabyte had the WORST compatibility among all , but they already released 4 bioses, so everything is fixed, if you still on OG bios no matter whos the board maker, get updated
i tested 2 latest bioses beta and normal for my gigabyte board and all the solutions online point me that this modules work only with some hi-end msi
its the AX5U5200C3816G-DCLABK
if u have something better im waiting
I have such kit sealed, its Micron, all cheap DDR5 is Micron, if you buy 5200 or lower its 98% Micron. BUT it should work fine at rated speed, even slight OC
With DDR5 many boards have had such issue but most if not all received bios updates with ram fixes, Gigabyte had the WORST compatibility among all , but they already released 4 bioses, so everything is fixed, if you still on OG bios no matter whos the board maker, get updated
i tested 2 latest bioses beta and normal for my gigabyte board and all the solutions online point me that this modules work only with some hi-end msi
its the AX5U5200C3816G-DCLABK
if u have something better im waiting
nizzen
Senior Member
Posts: 2321
Joined: 2005-08-05
Senior Member
Posts: 2321
Joined: 2005-08-05
#5987545 Posted on: 01/28/2022 12:38 AM
So is it a good investment? will it OC? Im still considering, if i buy it ill have to sell two new kits that i have XPG 5200 and Gskill RGB 6000/36
Do you know about any people on that forum with such kits?
2 people on Ocn got that kit in hand now. Many more soon
How well ddr5 is overclocking depends on time invested in it. We are still learning ddr5
The tools must be there if you want to overclock 6400c32. Read;
Good MB
Good Cpu
Knowledge
Enough time testing and failing LOL
More testing....
So is it a good investment? will it OC? Im still considering, if i buy it ill have to sell two new kits that i have XPG 5200 and Gskill RGB 6000/36
Do you know about any people on that forum with such kits?
2 people on Ocn got that kit in hand now. Many more soon
How well ddr5 is overclocking depends on time invested in it. We are still learning ddr5
The tools must be there if you want to overclock 6400c32. Read;
Good MB
Good Cpu
Knowledge
Enough time testing and failing LOL
More testing....
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 510
Joined: 2006-11-25
my ADATA 32GB (2x16GB) 5200MHz CL38 XPG Lancer is running at 4800 CL 40 which is the fastest i could reach stable, nothing above that works not even at 1.4V