Scythe Mugen 5 Rev.C CPU Cooler review
be quiet Pure Loop 2 FX 280mm LCS review
HP FX900 1 TB NVMe Review
Scythe FUMA2 Rev.B CPU Cooler review
SK Hynix Platinum P41 2TB M.2 NVMe SSD Review
Corsair K70 RGB PRO Mini Wireless review
MSI MPG A1000G - 1000W PSU Review
Goodram IRDM PRO M.2 SSD 2 TB NVMe SSD Review
Samsung T7 Shield Portable 1TB USB SSD review
DeepCool LS720 (LCS) review
Download: Radeon Software Adrenalin 2020 Edition 20.4.1 drivers
You can now download Radeon Software Adrenalin 2020 Edition 20.4.1 drivers. This release supports the launch of Resident Evil 3 and this release also contains improvements in stability with fixes for end user issues.
Download: Display Driver Uninstaller (DDU) v18.0.2.3 - 03/30/2020 09:06 AM
Download Display Driver Uninstaller DDU revision v18.0.2.3 This application is a driver removal utility that can help you completely uninstall AMD/NVIDIA graphics card drivers and packages from your ...
Download: GeForce 445.78 hotfix driver - 03/26/2020 09:35 AM
GeForce Hotfix display driver version 445.78 is based on our latest Game Ready Driver 445.75. This Hotfix driver addresses the issue that some DirectX 11 games may fail to launch when Image Sharpening...
Download: NVIDIA Geforce Game Ready 445.75 drivers (and an intro to DLSS v2.0 support) - 03/23/2020 05:08 PM
NVIDIA just released Geforce Game Ready 445.75 WHQL drivers. The new driver brings support for Half-Life: Alyx, Resident Evil 3 Ghost Recon Breakpoint's Ghost, and NVIDIA DLSS 2.0 to Control and Me...
Download: AMD Radeon Software Adrenalin 20.3.1 Drivers for DOOM Eternal - 03/19/2020 03:28 PM
Download the all-new Radeon Software Adrenalin 2020 Edition 20.2.3 as released by AMD for Radeon graphics cards with support for Doom ETERNAL, Half-Life Alyx and Ghost Recon Breakpoint. Download...
Download: GeForce 442.74 WHQL driver - 03/19/2020 03:03 PM
NVIDIA just released driver revision GeForce 442.74 WHQL for their GeForce graphics cards and notebooks. The new driver adds support for DOOM Eternal. Download...
ms178
Senior Member
Posts: 126
Joined: 2016-08-05
Senior Member
Posts: 126
Joined: 2016-08-05
#5776090 Posted on: 04/03/2020 05:05 PM
There is still the problem that the custom Wattman profiles don't get applied properly, at least the voltages (I skip the first setup of Adrenaline settings after installation, customize my settings afterwards (e.g. enable Anti-Lag globally) and load the XML with my Wattman profile).
If I do that and fire up Battlefield 1, my Vega 56 uses up to 240 W (due to +50 power target setting in my profile) at 1.14 V even though my Wattman profile is capped at 1000 mV at P7. Every time I need to Alt+Tab out of the game, change the P7 setting by a few mV in Wattman, apply it and Alt+Tab inside the game again to finally get the desired voltage which hovers around 0.99 V.
I haven't read anything about the ongoing HBCC issues on Vega which were still present for me on 20.3.1, but I have to re-check that with the current driver
There is still the problem that the custom Wattman profiles don't get applied properly, at least the voltages (I skip the first setup of Adrenaline settings after installation, customize my settings afterwards (e.g. enable Anti-Lag globally) and load the XML with my Wattman profile).
If I do that and fire up Battlefield 1, my Vega 56 uses up to 240 W (due to +50 power target setting in my profile) at 1.14 V even though my Wattman profile is capped at 1000 mV at P7. Every time I need to Alt+Tab out of the game, change the P7 setting by a few mV in Wattman, apply it and Alt+Tab inside the game again to finally get the desired voltage which hovers around 0.99 V.
I haven't read anything about the ongoing HBCC issues on Vega which were still present for me on 20.3.1, but I have to re-check that with the current driver
Dener de Paula Pereira
Senior Member
Posts: 109
Joined: 2019-03-14
Senior Member
Posts: 109
Joined: 2019-03-14
#5776105 Posted on: 04/03/2020 05:24 PM
There is still the problem that the custom Wattman profiles don't get applied properly, at least the voltages (I skip the first setup of Adrenaline settings after installation, customize my settings afterwards (e.g. enable Anti-Lag globally) and load the XML with my Wattman profile).
If I do that and fire up Battlefield 1, my Vega 56 uses up to 240 W (due to +50 power target setting in my profile) at 1.14 V even though my Wattman profile is capped at 1000 mV at P7. Every time I need to Alt+Tab out of the game, change the P7 setting by a few mV in Wattman, apply it and Alt+Tab inside the game again to finally get the desired voltage which hovers around 0.99 V.
I haven't read anything about the ongoing HBCC issues on Vega which were still present for me on 20.3.1, but I have to re-check that with the current driver
Me too
There is still the problem that the custom Wattman profiles don't get applied properly, at least the voltages (I skip the first setup of Adrenaline settings after installation, customize my settings afterwards (e.g. enable Anti-Lag globally) and load the XML with my Wattman profile).
If I do that and fire up Battlefield 1, my Vega 56 uses up to 240 W (due to +50 power target setting in my profile) at 1.14 V even though my Wattman profile is capped at 1000 mV at P7. Every time I need to Alt+Tab out of the game, change the P7 setting by a few mV in Wattman, apply it and Alt+Tab inside the game again to finally get the desired voltage which hovers around 0.99 V.
I haven't read anything about the ongoing HBCC issues on Vega which were still present for me on 20.3.1, but I have to re-check that with the current driver
Me too
SpajdrEX
AMD Vanguard
Posts: 2951
Joined: 2006-05-07
AMD Vanguard
Posts: 2951
Joined: 2006-05-07
#5776114 Posted on: 04/03/2020 05:56 PM
@ms178 @Dener de Paula Pereira I also have an issue with Wattman profile where Voltage/Fan settings are wrong (being set to default value), I reported this to our team.
@ms178 @Dener de Paula Pereira I also have an issue with Wattman profile where Voltage/Fan settings are wrong (being set to default value), I reported this to our team.
Dener de Paula Pereira
Senior Member
Posts: 109
Joined: 2019-03-14
Senior Member
Posts: 109
Joined: 2019-03-14
#5776135 Posted on: 04/03/2020 06:30 PM
Thanks!
@ms178 @Dener de Paula Pereira I also have an issue with Wattman profile where Voltage/Fan settings are wrong (being set to default value), I reported this to our team.
Thanks!
Click here to post a comment for this news story on the message forum.
Member
Posts: 29
Joined: 2017-09-21
Most notably iRacing and then WarThunder and CS:GO.