CRYORIG H7 Ultra cooler gets 4 heatpuipes and a TDP up-to 160W

An air-cooled CPU cooler that is TDP160W compliant and has better cooling performance by increasing the number of heat pipes to four. 

The 6mm diameter heat pipe is designed with a unique honeycomb shape "Hive Fin structure" that has the effect of rectification and eddy prevention, and the heat sink is built with a unique honeycomb shape "Hive Fin structure" that has the impact of rectification and eddy prevention.

Furthermore, "Zero RAM Interference" is used to offset the tower of the heat sink from the base plate. It reduces interference with the memory caused by a heat spreader and enhances the degree of mounting flexibility.

H7Ultra 800x600d
The cooling fan is outfitted with a PWM-controlled 120mm fan called the "QF120 Balance." To avoid vibration and noise, it employs genuine High Precision Low Noise bearings and rubber dampers at the four corners of the fan. The primary specifications are as follows: a rotation speed of 300 to 1,600 rpm 10%, a maximum air volume of 59 CFM, a maximum static pressure of 1.65 mmH2O, and a maximum noise of 25 dBA.

External measurements are as follows: width 123 mm, depth 98 mm, height 145 mm, and weight 713 g. (including fan). LGA 2066/2011 / 2011-3 / 1200 / 115x, AMD Socket AM4 / AM3 + / AM3 / AM2 + / AM2 / FM2 + / FM2 / FM1 are supported systems. In addition, to use with Intel LGA1700, a "CRYORIG LGA1700 UPGRADE KIT TYPE C" is necessary, and it will be delivered free of charge if the target CPU cooler and CPU are purchased after January 2021. The CPU cooler costs 50 USD.