EVGA GeForce RTX 3080 Ti FTW3 Ultra Review
F1 2021: PC graphics performance benchmark review
Asustor Drivestor 4 Pro (AS3304T) NAS Review
Colorful iGame GeForce RTX 3090 KUDAN review
Corsair Virtuoso RGB Wireless XT headset review
Galax HOF OC Lab Water Cooling 4400 MHz CL19 review
Scythe Mugen 5 Black air cooler review
KFA2 GeForce RTX 3080 Ti SG review
Mountain Everest Max keyboard review
Corsair iCUE 7000X RGB PC chassis review
Computex 2017: ASUS ROG GTX 1080 Ti Posseidon Spotted
ASUS talked about the GTX 1080 Ti Posseidon a couple of times already, and it seems it is available since April i think? Anyway, I spotted it at the ASUS booth and took a couple of photos.
A bit of a warning, the entire ROG section of the booth is colored and lighted in red massively, red is a horrible color combines with JPEG compression and already worse quality coming from a smart-phone, but hey .. you'll get the idea right ? So these are not the best photos.
The card can both be hybrid cooled with the fans used as well as using a liquid cooling loop. ASUS completely overhauled the looks and design for the Poseidon, including AURA RGB LED enablement and LED activated top side strip that jumps out alright. Armed with a massive liquid cooling block (H2O), a custom PCB, quality components and a factory overclock this product is bound to perform, whilst staying totally silent.
The ASUS GeForce GTX 1080 Ti Poseidon edition comes factory overclock (clocks have not been disclosed just yet) and that hybrid cooler which packs two dust-proof fans, multiple heatpipes, a large heatsink and a water block.
Tagged as:
Computex 2017
Computex 2017: Corsair Bulldog GTO - 06/02/2017 11:47 AM
Most of you probably can remember the Bulldog from Corsair right, it pretty much the predecessor of the new One series compact PCs. So in the press-release from Corsair you might have noticed an entry...
Computex 2017: Lian-Li To Offer a Raw Copper Liquid Cooling Kit - 06/01/2017 03:47 PM
So Yes, this is a bit of an exclusive first. A RAW copper rad, when you see the photo you'll understand what I mean. Basically Lian-Li will re-brand an LCS solution from Cinsys. The company (accordi...
Computex 2017: Gigabyte Shows Ryzen Mini ITX motherboard - 06/01/2017 03:35 PM
Lots of people are waiting in this, imagine that with an 8-core Ryzen processor. Gigabyte is (from the top of my head) the second company that launches an Mini-ITX form factor Ryzen motherboard. The G...
Computex 2017: Cooler Master Office and CM Store visit - 06/01/2017 03:07 PM
Cooler Master this year has invited a number of people from the media to their Taiwan based office, in this news item a tour of the facility. Cooler Master was founded in 1992 (yes 25th anniversary) a...
Computex 2017: Gigabyte X399 Aorus Gaming 7 Up Close and Personal - 06/01/2017 02:31 PM
So I finally got around to visit the Taipei 101 suite that Gigabyte hires each year to display their products. X299is nice, but the hottest topic and thing on Computex to see really are X399 motherboa...
NamelesONEMail
Member
Posts: 35
Joined: 2013-01-10
Member
Posts: 35
Joined: 2013-01-10
#5438558 Posted on: 06/02/2017 04:25 PM
Why not ? There are plenty of reasons:
1) Not everybody likes the look of the slim single slot waterblocks. It makes your 900-950 euro(where I live) card look puny and less impressive : ))
2) Its much easier to work with ? If your pump dies or anything else that takes your watercooling loop out of order you can still use the GPU on aircooling.
3) Related to #1 is the fact that maybe you just like the look of it : ))
4) Its much easier to resell and you loose less money than trying to sell a nieche waterblock for a specific model (unless you go with FE GPU and even then it not that easy as people who watercool tend to buy the latest GPU's, not older models)
5) This point is smth that most people don't seem to comprehend at all: You DON'T need temps in the 40's for your GPU or for the other components on a GPU. They are meant to work at high temperatures and you don't get any benefit by overdoing it and lowering those temps by too much. All you need to do is keep your temps under 80*C so it doesn't throttle and do it with as little noise as possible. This Poseidon will keep your GPU under 60*C and that's all you need. Its not like you'll get better performance by keeping it at 40*C instead of 60*C. In the age these new nvidia GPU's where your max overclock is affected almost entirely by the silicon lottery there isn't much point to buying a waterblock for temps in the 40's
Why would anyone buy this?
Why not ? There are plenty of reasons:
1) Not everybody likes the look of the slim single slot waterblocks. It makes your 900-950 euro(where I live) card look puny and less impressive : ))
2) Its much easier to work with ? If your pump dies or anything else that takes your watercooling loop out of order you can still use the GPU on aircooling.
3) Related to #1 is the fact that maybe you just like the look of it : ))
4) Its much easier to resell and you loose less money than trying to sell a nieche waterblock for a specific model (unless you go with FE GPU and even then it not that easy as people who watercool tend to buy the latest GPU's, not older models)
5) This point is smth that most people don't seem to comprehend at all: You DON'T need temps in the 40's for your GPU or for the other components on a GPU. They are meant to work at high temperatures and you don't get any benefit by overdoing it and lowering those temps by too much. All you need to do is keep your temps under 80*C so it doesn't throttle and do it with as little noise as possible. This Poseidon will keep your GPU under 60*C and that's all you need. Its not like you'll get better performance by keeping it at 40*C instead of 60*C. In the age these new nvidia GPU's where your max overclock is affected almost entirely by the silicon lottery there isn't much point to buying a waterblock for temps in the 40's
DeskStar
Senior Member
Posts: 1230
Joined: 2011-01-11
Senior Member
Posts: 1230
Joined: 2011-01-11
#5438837 Posted on: 06/03/2017 03:04 PM
Why not ? There are plenty of reasons:
1) Not everybody likes the look of the slim single slot waterblocks. It makes your 900-950 euro(where I live) card look puny and less impressive : ))
2) Its much easier to work with ? If your pump dies or anything else that takes your watercooling loop out of order you can still use the GPU on aircooling.
3) Related to #1 is the fact that maybe you just like the look of it : ))
4) Its much easier to resell and you loose less money than trying to sell a nieche waterblock for a specific model (unless you go with FE GPU and even then it not that easy as people who watercool tend to buy the latest GPU's, not older models)
5) This point is smth that most people don't seem to comprehend at all: You DON'T need temps in the 40's for your GPU or for the other components on a GPU. They are meant to work at high temperatures and you don't get any benefit by overdoing it and lowering those temps by too much. All you need to do is keep your temps under 80*C so it doesn't throttle and do it with as little noise as possible. This Poseidon will keep your GPU under 60*C and that's all you need. Its not like you'll get better performance by keeping it at 40*C instead of 60*C. In the age these new nvidia GPU's where your max overclock is affected almost entirely by the silicon lottery there isn't much point to buying a waterblock for temps in the 40's
Except for one factor.....Longevity of the silicone will much greater over a period of time when the hardware stays at a much cooler temperature all around. Especially if that can be achieved with an undervolt over the factory preset.
Temperatures are always something to want to keep as low as possible....hence huge intensive servers keep it all under sub-z or as close as possible.
Why not ? There are plenty of reasons:
1) Not everybody likes the look of the slim single slot waterblocks. It makes your 900-950 euro(where I live) card look puny and less impressive : ))
2) Its much easier to work with ? If your pump dies or anything else that takes your watercooling loop out of order you can still use the GPU on aircooling.
3) Related to #1 is the fact that maybe you just like the look of it : ))
4) Its much easier to resell and you loose less money than trying to sell a nieche waterblock for a specific model (unless you go with FE GPU and even then it not that easy as people who watercool tend to buy the latest GPU's, not older models)
5) This point is smth that most people don't seem to comprehend at all: You DON'T need temps in the 40's for your GPU or for the other components on a GPU. They are meant to work at high temperatures and you don't get any benefit by overdoing it and lowering those temps by too much. All you need to do is keep your temps under 80*C so it doesn't throttle and do it with as little noise as possible. This Poseidon will keep your GPU under 60*C and that's all you need. Its not like you'll get better performance by keeping it at 40*C instead of 60*C. In the age these new nvidia GPU's where your max overclock is affected almost entirely by the silicon lottery there isn't much point to buying a waterblock for temps in the 40's
Except for one factor.....Longevity of the silicone will much greater over a period of time when the hardware stays at a much cooler temperature all around. Especially if that can be achieved with an undervolt over the factory preset.
Temperatures are always something to want to keep as low as possible....hence huge intensive servers keep it all under sub-z or as close as possible.
Click here to post a comment for this news story on the message forum.
Senior Member
Posts: 344
Joined: 2007-02-15
Why would anyone buy this?