ClockTuner v2.0 RC5 for Ryzen (CTR) info and download
Today we bring you ClockTuner v2.0 RC5 (Hotfix for RC4), below the fold a small changelog as well as some tips and link to download.
Yuri has updated ClockTuner for Ryzen towards build v2.0 RC4. CTR (ClockTuner for Ryzen) software allows each user to customize the system with maximum energy efficiency. In this case, CTR is fully automated and does not limit the user in actions. The program has a kind of artificial intelligence, which will help in any situation, and the protection system will monitor each step so that your components were not exposed to danger. CTR is compatible with all motherboards on the AM4 socket, despite the artificial limitations of AMD. As for conditions, it is probably one thing - the processor should be based on ZEN2 and now ZEN3 architecture. CTR is made by Guru3D's oldtimer 1USMUS.
You can download the ClockTuner v2.0 RC4 update here.
Tips
“I finished tuning what's next? “
Click on the PROFILES button to go to the page for saving the profile. Refer to image1 below.
Press FILL & SAVE P1 PROFILE (or FILL & SAVE P2 PROFILE) depending on where you want to save the profile. Refer to image 2 below.
CTR will move the tuning results to the selected cell. Note that the FILL & SAVE P1 PROFILE button has now changed its name to SAVE P1 PROFILE. This is a multifunctional button that changes its capabilities depending on what happens in the CTR. Refer to image 3 below.
“I saved the profile but it won't load with Windows” Refer to image 4 below.
- Enable Autoload profile with OS
- Enable CTR HYBRID OC
- ACTIVATE P1 PROFILE
After this step, the user forgets to say to the program "I want to keep the activated profile status so it loads automatically" and often just leave to make their unique "bug report".
4) After activation, be sure to save the activation status! SAVE P1 PROFILE button. The same goes for deactivating the profile. Make it a rule to always save your profile after each change.
ClockTuner v2.0 RC4 Changelog:
- Updated driver. Full compatibility with all anti-cheats. Full compatibility with Ryzen Master.
- The response speed of profile switching has increased by 5 times. The 1 cycle time is now 50ms.
- HYBRID OC redesign. More stability and smoother profile switching.
- Automatic acceptance of the Cinebench R20 license (less user actions before you start working with CTR).
- Improved security of CTR and processor communication.
- Improved protection against dangerous user actions (from forced attempts to interfere with CTR processes).
- Improved support for unique dual CCD processors (5600X, 5800X, 3600, 3600X).
- Updated PROFILE MANAGEMENT. Multifunctional buttons, simpler interface (PROFILES tab).
- The CPU category (Gold, Silver etc) is now protected from "LLC cheaters".
- Redesigned LLC tips.
- Added tips when entering data incorrectly for profiles.
- Profile status. On PROFILES and TUNER tab you can see which profile is currently active.
- Fixed visual bug of high VID or high TEMPERATURE.
- Fixed random crash when using HYBRID OC.
- Fixing other minor bugs.
ClockTuner v2.0 RC5 Hotfix
- Lower reference frequency values for Zen3 (extra safety when pressing the TUNE button)
- * The number of attempts to contact the SMU is increased from 5 to 10
- * Testing Mode - only AVX Light (fixed a bug where it was possible to unlock this switcher)
ClockTuner 2.1 Can Bin Certain Ryzen Cores to 5.0 GHz - 02/16/2021 04:05 PM
Clock Tuner for Ryzen has been brought to Beta 2.1; however, let me make this very clear before you start emailing me; this version is not yet available for public download. However, the update can be...
ClockTuner v2.0 for Ryzen (CTR) Guide and download - Brings support for Ryzen 5000 - 02/03/2021 10:00 AM
In this article, we will talk you through ClockTuner for Ryzen version 2.0, a helpful tool that allows you to further refine ZEN2, ZEN3 and Ryzen 3000/5000 performance. Yuri has been hard at work with...
ClockTuner for Ryzen to be Overhauled and Updated (CTR v2.0) - 12/28/2020 04:13 PM
We've written a lot about this software, and it's been a popular tool ever since the beginning. Yuri emailed us this morning with a bit of a teaser presentation for the soon to be released CTR vers...
Download: ClockTuner for Ryzen build v1.1 beta 7 - 10/22/2020 07:06 PM
A couple of weeks ago, 1usmus introduced you to the ClockTuner for Ryzen project, which is designed to improve processors' performance with the Zen 2 microarchitecture by accurately tuning each CCX. ...
ClockTuner for Ryzen (CTR) v1.0 Beta 3 - an introduction, guide and download - 09/29/2020 06:02 PM
Who doesn't like free extra performance from that ZEN2 based proc of yours? 1USMUS is ready to share his new application, CTR aka ClockTuner for Ryzen. You can grab the software and try it out, howev...
Junior Member
Posts: 13
Joined: 2021-02-03
Tried it, same issue, RC4 won't start (while RC3's working like a charm).
Junior Member
Posts: 1
Joined: 2021-03-04
@guilamu, try deleting everything from rc3 then copy over new files. Run the config remover then reboot your pc. Should work?
Junior Member
Posts: 13
Joined: 2021-02-03
No luck.
I've got a pretty standard rig, so I guess most people won't be able to use RC4.
Member
Posts: 50
Joined: 2020-10-01
I'm scared by comments above...
I'm using RC3 and it is working just fine. What is the safest mode to upgrade to RC4 ?
Junior Member
Posts: 2
Joined: 2020-03-11
Getting less frequency than RC3 and the results page is confusing with better performance shown for CB testing but less overall compared to the default system specs...