FSP Hydro PTM Pro (1200W PSU) review
ASUS ROG Radeon RX 6750 XT STRIX review
AMD FidelityFX Super Resolution 2.0 - preview
Sapphire Radeon RX 6650 XT Nitro+ review
Sapphire Radeon RX 6950 XT Sapphire Nitro+ Pure review
Sapphire Radeon RX 6750 XT Nitro+ review
MSI Radeon RX 6950 XT Gaming X TRIO review
MSI Radeon RX 6750 XT Gaming X TRIO review
MSI Radeon RX 6650 XT Gaming X review
Deepcool AS500 PLUS CPU Cooler Review
Aqua Computer releases Dr. Delid
Dr. Delid from Aqua Computer is a compact tool to remove the heat spreader of Skylake and Kaby Lake CPUs. After replacing the thermal grease, the tool also allows to reinstall the heat spreader securely and precisely.
The heat spreader is gently separated from the CPU by twisting and requires no noteworthy effort from the user. This is important to avoid damage to the thin PCBs of the Skylake and Kaby Lake processors. When the heat spreader is rotated, the force is dissipated across all four edges of the CPU.
Aqua Computer has designed Dr. Delid to operate in a secure way so the customer does not have to worry about its expensive CPU. The delid disc which removes the heat spreader also locks the CPU so it can not jump out of the tool. The screw has a stop position so it can not be turned too far. After the removal of the heat spreader the CPU can be lifted through an opening in the tool without touching the gold contacts.
When the thermal grease has been replaced, another insert allows an exactly centered position of the heat spreader to glue it to the CPU again. A clamp which is inserted from the side uses a screw to apply some pressure to the heat spreader while the glue cures. Of course the screw is made of plastic and can not damage the surface nor does it allow applying a too high pressure.
Heat spreader removal process
Aqua Computer's no. 1 priority: Prevention of CPU damage
- The processor is inserted into an exact, CNC machined recess in the acetal base. The relatively soft acetal material prevents damage to the CPU by excessive punctual pressure or scratching.
- Before the actual removal process, the CPU is locked in place. The tool can be handled without risk of the CPU dropping from the tool.
- The removal process is facilitated by rotating the hexagon socket screw by hand using the supplied wrench. A mechanical stop limits the rotation of the heat spreader in the tool.
- During the removal process, the heat spreader is secured in the tool. It can not hit the CPU die by accident.
- After removal of the heat spreder, an aperture in the tool allows to lift the CPU from the tool without touching the gold contacts.
Reinstallation of the heat spreader
After cleaning the CPU and application of new thermal grease, insert the CPU into the tool again. Dr. Delid can be used for precise installation of the heat spreader:
- A stainless steel frame for heat spreader alignment is inserted into a recess in the tool. The heat spreader can now be inserted into the frame, resulting in perfect alignment to the CPU. The heat spreader can be installed with glue (for instance silicone or polyurethane).
- A stainless steel bracket supplied with the tool can be used to apply slight pressure to the center of the heat spreader, until the glue is cured. A knurled screw made from polyamide prevents damage to the heat spreader.
Dr. Delid can be already ordered in Aqua Computers webshop. The price is 29.90 EUR. Shipping starts at February 27th. More info can be found here.
Aqua Computer VISION Lineup of Watercooling Add-ons - 11/24/2016 10:11 AM
What will water blocks look like in the future? This was the question that Aqua Computer has asked itself before they started developing VISION. From this question emerged the idea for an OLED display...
Aqua Computer Cuplex Kryos NEXT Water Block with OLED Display - 10/28/2016 06:09 PM
Alright let me be the first to say it, very innovatie and looking good. Aqua Computer is releasing a highly innovative new CPU cooler, the Cuplex Kryos NEXT. A liquid cooling water-block with the VARI...
Aqua Computer Kryographics TITAN X Pascal Water Block - 08/10/2016 07:48 AM
German-based liquid cooling specialist Aqua Computer offers its kryographics Pascal for Nvidia TITAN X as of now. The TITAN X variant also features a jet plate above the GPU area to provide an outstan...
Aqua Computer Adds Kryographics RX 480 Water Block - 07/11/2016 08:19 AM
The kryographics RX 480 is completely CNC manufactured. The production takes place in Aqua Computers own production facilities in Germany. The base is made of electrolytic copper with a thickness of 1...
Aqua Computer Launches Kryogrphics Water Blocks for GTX 1080 and GTX 1070 - 06/06/2016 02:42 PM
Aqua Computer has added the water block kryographics Pascal to its portfolio. Due to an almost equal PCB it is possible to use the cooling block with the GTX 1080 and GTX 1070. For the first time Aqua...
anub1s18
Senior Member
Posts: 140
Joined: 2009-03-21
Senior Member
Posts: 140
Joined: 2009-03-21
#5397462 Posted on: 02/24/2017 03:23 PM
if true and it can oc nicely intel might not be the cpu in my next upgrade for the first time since i had pc's, having a watercooled pc the heatspreader on my i5 4670k is driving me crazy, gpu oc'd under full load 50 degree's, cpu casually hitting 65-70 even on stock clocks (got it running 4.2 on all core's usually though) damnit intel
shoulda stayed on the enthusiast platform at least they still have proper heatspreaders... for now....
wish these tools were available and this cheap when i tried to delid my cpu, had to try with a razor and couldn't get it off. thinnest razer i could find still wouldn't get under the heatspreader to cut the glue in any of the 4 corners
Ryzen is soldered.
if true and it can oc nicely intel might not be the cpu in my next upgrade for the first time since i had pc's, having a watercooled pc the heatspreader on my i5 4670k is driving me crazy, gpu oc'd under full load 50 degree's, cpu casually hitting 65-70 even on stock clocks (got it running 4.2 on all core's usually though) damnit intel
shoulda stayed on the enthusiast platform at least they still have proper heatspreaders... for now....
wish these tools were available and this cheap when i tried to delid my cpu, had to try with a razor and couldn't get it off. thinnest razer i could find still wouldn't get under the heatspreader to cut the glue in any of the 4 corners
sverek
Senior Member
Posts: 6073
Joined: 2011-01-02
Senior Member
Posts: 6073
Joined: 2011-01-02
#5397471 Posted on: 02/24/2017 03:41 PM
This is just plain stupid.
But human stupidity is infinite, so it'll work.
This is just plain stupid.
But human stupidity is infinite, so it'll work.
BLEH!
Senior Member
Posts: 6220
Joined: 2010-10-17
Senior Member
Posts: 6220
Joined: 2010-10-17
#5397505 Posted on: 02/24/2017 05:06 PM
Good news, indeed.
Ryzen is soldered.
Good news, indeed.
Agent-A01
Senior Member
Posts: 11554
Joined: 2010-12-27
Senior Member
Posts: 11554
Joined: 2010-12-27
#5397544 Posted on: 02/24/2017 06:26 PM
This is just plain stupid.
But human stupidity is infinite, so it'll work.
Why is this stupid?
Intel is stupid for artificially limiting consumer's CPUs by using an inferior process of mating the die and HS.
This is just plain stupid.
But human stupidity is infinite, so it'll work.
Why is this stupid?
Intel is stupid for artificially limiting consumer's CPUs by using an inferior process of mating the die and HS.
Click here to post a comment for this news story on the message forum.
Junior Member
Posts: 1
Joined: 2016-10-19
An efficient way to destroy your warranty for only 30€!
Jokes aside, I think it's gonna be particularly useful in hands of crafty overclockers. At least they won't have to use razors anymore, rip finger / cpu.