Alphacool introduces four new rather HUGE liquid cooling radiators

The first two radiators are for 180 or 200 mm fans and are a thickness of 86mm. The 200 and 400mm NexXxoS Monsta radiators offer a huge cooling surface. Both radiators have 7x standard G1/4" ports. 6 of the ports are for inlet/outlet and the 7th port is located at the end chamber and can only be used for filling, draining, or bleeding the radiator. The fin density has been reduced from 16 to 12 FPI to allow the use of lower static pressure fans and lower RPMs.

The new Nova 1080 UT60 radiator is a thicker version of the Nova 1080 XT45 radiator. The enormous cooling surface is comparable to three 360mm UT60 radiators. This makes it easy to cool more than 1000W of excess heat with extremely quiet to silent spinning fans. This is equivalent to a 64 core AMD Threadripper of the latest generation and at least two Geforce RTX 3090 graphics cards.

The NexXxoS XT45 Quad Radiator is the little sibling of the Nova radiators. It comes with two fan mounting plates, each of which can accommodate four 120 or 140mm fans. This corresponds to the cooling capacity of two 280mm radiators or one 560mm radiator. This should be enough for any system that consists of a CPU and GPU, no matter what model, even with an overclock.

As always, all water bearing parts of the radiator are made of copper. The pre-chambers, the cooling channels and the fins are all copper. Only the mounting plates and the side plates of the radiator are made of steel. The threads are all brass, as pure copper would be too soft.