Sapphire Radeon RX 7600 PULSE review
Gainward GeForce RTX 4060 Ti GHOST review
Radeon RX 7600 review
ASUS GeForce RTX 4060 Ti TUF Gaming review
MSI GeForce RTX 4060 Ti Gaming X TRIO review
GeForce RTX 4060 Ti 8GB (FE) review
Corsair 2000D RGB Airflow Mini-ITX - PC chassis review
ASUS PG27AQDM Review - 240Hz 1440p OLED monitor
MSI MAG X670E Tomahawk WiFi review
Mountain Makalu Max mouse review
AMD Catalyst 14.4 WHQL (14.100.0.0 April 17)
on: 05/05/2014 06:18 AM [ 9 comment(s) ]
Advertisement
Download AMD Catalyst 14.4 WHQL (14.100.0.0 April 17)
AMD's Catalyst 14.4 drivers have gone gold and are now available to download in 32-bit and 64-bit flavors for Windows and Linux.
If you're sitting pretty on a Windows box, the Catalyst 14.4 software suite requires Windows 7 Service Pack 1 to be installed (or a later version of Windows). In return, the new driver package adds support for AMD's dual-GPU Radeon R9 295X2 graphics cards. The driver package also addresses a handful of issues and offers a few performance bumps, such as flickering in Titanfall when running a CrossFire configuration and increasing CrossFire scaling by up to 34 percent in Anno 2070.
There are a couple of known issues AMD is working to fix. One is that you might see a blue screen of death when encoding with Power Director 11, and the other is that driver installation could result in a black screen when installing on a dual AMD Radeon R9 295X configuration under Windows 8.1 (AMD suggests rebooting if this happens).
Build Info:
DriverVer=04/17/2014, 14.100.0.0000
Catalyst: 14.4 WHQL
CCC: 2014.0417.2226.38446
D3D: 9.14.10.01029
OGL: 6.14.10.12847
OCL: 10.0.1445.5
Mantle: 9.1.10.0013
2 pages 1 2
gungun
Member
Posts: 43
Joined: 2005-04-29
Member
Posts: 43
Joined: 2005-04-29
#4812167 Posted on: 05/04/2014 10:15 PM
asus r9 290, my old setup was different pc hehe.... this is a new one with 290
i'm thinking about adding 4th on the right side of the case as i have the option to directly cool the gpu.
To keep your over all PC cooler, yes it will help, if your 290 is a reference model it will help also, not knowing your old case and fan setup the difference could be from a few degrees 1-5C to 10-15C at best. You should probably setup a custom fan profile on the 290 using AB or Trixx as it would probably help most.
asus r9 290, my old setup was different pc hehe.... this is a new one with 290
i'm thinking about adding 4th on the right side of the case as i have the option to directly cool the gpu.
gerardfraser
Senior Member
Posts: 3343
Joined: 2008-03-08
Senior Member
Posts: 3343
Joined: 2008-03-08
#4812188 Posted on: 05/04/2014 11:03 PM
I am running R9 290 Crossfire on air with reference and Non-Reference card in a Nvidia Haf-X case.
Reference card on the bottom,case has 1x200mm side intake,1x240mm front intake,2x200mm top exhaust and 120mm to exhaust air out the back.
Adding more fans work good,but as rflair suggest custom fan profile is a good way to go.
Here is what temperatures look like with small overclock on the cards.
Crysis 3 runs so cards are working hard.
R9 290 Crossfire Fans 100%
R9 290 Crossfire Custom Fan Profile
R9 290 Crossfire Auto Fan profile
I am running R9 290 Crossfire on air with reference and Non-Reference card in a Nvidia Haf-X case.
Reference card on the bottom,case has 1x200mm side intake,1x240mm front intake,2x200mm top exhaust and 120mm to exhaust air out the back.
Adding more fans work good,but as rflair suggest custom fan profile is a good way to go.
Here is what temperatures look like with small overclock on the cards.
Crysis 3 runs so cards are working hard.
R9 290 Crossfire Fans 100%
R9 290 Crossfire Custom Fan Profile
R9 290 Crossfire Auto Fan profile
gungun
Member
Posts: 43
Joined: 2005-04-29
Member
Posts: 43
Joined: 2005-04-29
#4812190 Posted on: 05/04/2014 11:06 PM
how do i set up custom fan profile?
how do i set up custom fan profile?
gerardfraser
Senior Member
Posts: 3343
Joined: 2008-03-08
Senior Member
Posts: 3343
Joined: 2008-03-08
#4812198 Posted on: 05/04/2014 11:26 PM
There are several third party solution you can use for custom fan profile and voltage control of VCCD.
Here are a couple that are very good to use with voltage control .200mv and higher for high stable overclocks.
Sapphire Trixx
Asus GPU Tweak
Most Popular with voltage control as is .100mv for good overclock and fan control and much more
MSI Afterburner 3.0.0 Beta 19
Get the most out of your R9 290 card with tweaking
RadeonPro BETA (Automating 3D Settings)
You can also run a stable card without any voltage tweaking just fine and not have any throttling at all.
Example would be something like this with MSI after burner.
There are several third party solution you can use for custom fan profile and voltage control of VCCD.
Here are a couple that are very good to use with voltage control .200mv and higher for high stable overclocks.
Sapphire Trixx
Asus GPU Tweak
Most Popular with voltage control as is .100mv for good overclock and fan control and much more
MSI Afterburner 3.0.0 Beta 19
Get the most out of your R9 290 card with tweaking
RadeonPro BETA (Automating 3D Settings)
You can also run a stable card without any voltage tweaking just fine and not have any throttling at all.
Example would be something like this with MSI after burner.
2 pages 1 2
Post New Comment
Click here to post a comment for this file on the message forum.
Moderator
Posts: 4616
Joined: 2004-11-20
To keep your over all PC cooler, yes it will help, if your 290 is a reference model it will help also, not knowing your old case and fan setup the difference could be from a few degrees 1-5C to 10-15C at best. You should probably setup a custom fan profile on the 290 using AB or Trixx as it would probably help most.