Endorfy Arx 700 Air chassis review
Beelink SER5 Pro (Ryzen 7 5800H) mini PC review
Crucial T700 PCIe 5.0 NVMe SSD Review - 12GB/s
Sapphire Radeon RX 7600 PULSE review
Gainward GeForce RTX 4060 Ti GHOST review
Radeon RX 7600 review
ASUS GeForce RTX 4060 Ti TUF Gaming review
MSI GeForce RTX 4060 Ti Gaming X TRIO review
GeForce RTX 4060 Ti 8GB (FE) review
Corsair 2000D RGB Airflow Mini-ITX - PC chassis review
GeForce GTX 1050 3GB review




Nvidia recently released a new entry-level SKU into the market, a GeForce GTX 1050 with 3GB graphics memory. In this review, we'll confirm if this product really is a GeForce GTX 1050 Ti, with less memory. If so, that might make these cards an interesting and attractive product to purchase as it has a little more oomph under that hood.
Read article
Advertisement
« be quiet! Dark Base Pro 900 Rev.2 review · GeForce GTX 1050 3GB review
· Corsair Vengeance Pro RGB 3200 MHz DDR4 review »
pages 1 2 3 4 > »
Hilbert Hagedoorn
Don Vito Corleone
Posts: 46367
Don Vito Corleone
Posts: 46367
Posted on: 07/06/2018 03:30 PM
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Or is it just a grasp back to the good old times and we're all getting older and grumpy

Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Or is it just a grasp back to the good old times and we're all getting older and grumpy


IchimA
Senior Member
Posts: 1304
Senior Member
Posts: 1304
Posted on: 07/06/2018 03:42 PM
Old school HH , but the best was 8800GTX and GTS ... good graphic cards, with a nice bang for buck ... not like now ! 700 - 800 euro for a tier 2 card
Old school HH , but the best was 8800GTX and GTS ... good graphic cards, with a nice bang for buck ... not like now ! 700 - 800 euro for a tier 2 card
rl66
Senior Member
Posts: 3655
Senior Member
Posts: 3655
Posted on: 07/06/2018 03:43 PM
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Or is it just a grasp back to the good old times and we're all getting older and grumpy

You are not, i love single slot solution and/or passive... as a WC user i use single slot solution when it is possible.
Also it is more cute.
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Or is it just a grasp back to the good old times and we're all getting older and grumpy


You are not, i love single slot solution and/or passive... as a WC user i use single slot solution when it is possible.
Also it is more cute.
schmidtbag
Senior Member
Posts: 7431
Senior Member
Posts: 7431
Posted on: 07/06/2018 03:47 PM
GPUs like this are ideal for ITX builds, and many ITX cases only support 1 slot. Also, some people have a use for all expansion slots available on their motherboard. I have a BOINC rig with 4x GPUs, 1 PCIe wifi card, and a PCI diagnostic card. This would not be possible if it weren't for single-slot cards. Sure, I could maybe use risers or buy aftermarket coolers, but why should I when I don't have to?
Not all - there are plenty of mobos out there with a PCIe x1 slot directly below the x16 slot (or, larger slots when you consider servers and workstations).
I think of this more in a practicality sense:
If you've got a ~50W GPU that can run perfectly cool and quiet as a low-profile single-slot card, why wouldn't you? It's basically universally compatible with all build types. The manufacturer will maximize their market (and therefore profits) if they can accommodate this. So as far as I'm concerned, this is a missed opportunity.
Pure curiosity and nothing else, but why do many people still have a fascination for single slot solutions?
GPUs like this are ideal for ITX builds, and many ITX cases only support 1 slot. Also, some people have a use for all expansion slots available on their motherboard. I have a BOINC rig with 4x GPUs, 1 PCIe wifi card, and a PCI diagnostic card. This would not be possible if it weren't for single-slot cards. Sure, I could maybe use risers or buy aftermarket coolers, but why should I when I don't have to?
I mean from a practical point of view really it doesn't make any difference as all mobos are designed for dual-slot. Next to that dual-slot will cool better and offer improved acoustics. I mean you can argue that it could look nicer, but even that is debatable. Also, you'll have more display outputs with dual-slot.
Not all - there are plenty of mobos out there with a PCIe x1 slot directly below the x16 slot (or, larger slots when you consider servers and workstations).
Or is it just a grasp back to the good old times and we're all getting older and grumpy 

I think of this more in a practicality sense:
If you've got a ~50W GPU that can run perfectly cool and quiet as a low-profile single-slot card, why wouldn't you? It's basically universally compatible with all build types. The manufacturer will maximize their market (and therefore profits) if they can accommodate this. So as far as I'm concerned, this is a missed opportunity.
pages 1 2 3 4 > »
Click here to post a comment for this article on the message forum.
Senior Member
Posts: 7431
It's a good thing they marketed it as a 1050, because that 96-bit memory is pretty crippling. Even when the GPU core is overwhlemed in 4K, the memory still bottlenecks the performance.
I also think they easily could've made this a single-slot GPU. It runs pretty cool, even under full load. Making this a dual-slot reduces the amount of potential cases you could put it in.