ASRock Radeon RX 6700 XT Phantom Gaming D OC review
Enermax Aquafusion 360 review LCS
Intel Core i5 11400F processor review
Corsair Vengeance RGB Pro SL 3600 MHz 32GB review
ASRock Z590 Extreme review
Gigabyte Radeon RX 6700 XT Gaming OC review
Corsair K70 RGB TKL keyboard review
Corsair RM650x (2021) power supply review
be quiet! Silent Loop 2 280mm review
Corsair K55 RGB PRO XT keyboard review
Corsair Strafe RGB MK.2 (w/ silent switches) review
Posted by: on: 07/05/2018 09:38 AM [
8 comment(s) ]
In this review, we check out the new Corsair Corsair Strafe RGB MK.2 keyboard. The MK.2 is based on Cherry MX switches and is available in two variants. One has Cherry MX Red switches, the other (the one review today) Cherry MX Silent.
Read article
Advertisement
Tagged as:
Corsair
pages 1 2
DribbelDog
Junior Member
Posts: 15
Junior Member
Posts: 15
Posted on: 07/05/2018 11:38 AM
Once I was foolish enough to get a Corsair keyboard. The K65 RGB to be precise. I believe it was the first board to ever come out with Cherry RGB switches, which is why I got temped. But my god, wat a horrible keyboard. I need some bullet points for this one:
Thick non-detachable cable right in the middle. My god. Worst possible placement in my opinion, and no room for customization because it's not detachable. It takes up !2! USB ports as well.
The (first generation) Cherry RGB switches were scratchy as hell. Feels horrible. I guess Corsair doesn't deserve all the blame for this, but hey they chose to produce a keyboard with these horrible switches. I'll admit I've been too lazy to lube them to this day though.
The lighting on (at least the first generation of) Cherry RGB switches wasn't bright enough in my opinion. And I don't even like them that bright. Also, white wasn't 'white enough'; didn't look nearly as good as pure white led Cherry switches. Probably because of the Cherry solution of having the entire switch housing light up, thus not having light being focused on the key-cap legend.
The Corsair driver/software has been horrific since the start. I'm not a UI designer, but if I can't find my way around the software for a KEYBOARD, it's definitely not intuitive. I would have liked a hardware programmable option instead, even though that's probably not intuitive either. I've had bad experiences with the software that came with the H100 software as well, so I don't really trust Corsair with software at this point. Perhaps the most ludicrous thing is that the keyboard can only handle basic lighting settings from memory. You NEED the driver for the more fancy effects. So when I boot the PC, the keyboard sits in a solid color. When Windows loads, the effects start. It's just sad.
The brushed aluminum stains easily. It looks good at first, but looks rather dirty after only a little while. I've never liked the brushed aluminum finishes of Corsair due to this staining. The same goes for their enclosures, you'd better use gloves.
Mushy media keys. I'd rather not have them at all, or have an FN solution, than to have mushy media keys that feel totally different to the rest of the keyboard.
Corsair tramp stamp. What can I say. Luckily this has long been resolved.
Of course not all of these issues apply to this particular board, but too many still do. Each and every one of them would be a deal breaker on its own to me at this point. There are so many amazing mechanical keyboards out there to buy and/or build, that I can't see why anyone would even consider this anymore.
I know a lot of people are really satisfied with their Corsair boards. I just can't, for the life of me, ever recommend one of these boards to anyone.
Once I was foolish enough to get a Corsair keyboard. The K65 RGB to be precise. I believe it was the first board to ever come out with Cherry RGB switches, which is why I got temped. But my god, wat a horrible keyboard. I need some bullet points for this one:
Thick non-detachable cable right in the middle. My god. Worst possible placement in my opinion, and no room for customization because it's not detachable. It takes up !2! USB ports as well.
The (first generation) Cherry RGB switches were scratchy as hell. Feels horrible. I guess Corsair doesn't deserve all the blame for this, but hey they chose to produce a keyboard with these horrible switches. I'll admit I've been too lazy to lube them to this day though.
The lighting on (at least the first generation of) Cherry RGB switches wasn't bright enough in my opinion. And I don't even like them that bright. Also, white wasn't 'white enough'; didn't look nearly as good as pure white led Cherry switches. Probably because of the Cherry solution of having the entire switch housing light up, thus not having light being focused on the key-cap legend.
The Corsair driver/software has been horrific since the start. I'm not a UI designer, but if I can't find my way around the software for a KEYBOARD, it's definitely not intuitive. I would have liked a hardware programmable option instead, even though that's probably not intuitive either. I've had bad experiences with the software that came with the H100 software as well, so I don't really trust Corsair with software at this point. Perhaps the most ludicrous thing is that the keyboard can only handle basic lighting settings from memory. You NEED the driver for the more fancy effects. So when I boot the PC, the keyboard sits in a solid color. When Windows loads, the effects start. It's just sad.
The brushed aluminum stains easily. It looks good at first, but looks rather dirty after only a little while. I've never liked the brushed aluminum finishes of Corsair due to this staining. The same goes for their enclosures, you'd better use gloves.
Mushy media keys. I'd rather not have them at all, or have an FN solution, than to have mushy media keys that feel totally different to the rest of the keyboard.
Corsair tramp stamp. What can I say. Luckily this has long been resolved.
Of course not all of these issues apply to this particular board, but too many still do. Each and every one of them would be a deal breaker on its own to me at this point. There are so many amazing mechanical keyboards out there to buy and/or build, that I can't see why anyone would even consider this anymore.
I know a lot of people are really satisfied with their Corsair boards. I just can't, for the life of me, ever recommend one of these boards to anyone.
Inquisitor
Senior Member
Posts: 117
Senior Member
Posts: 117
Posted on: 07/05/2018 12:08 PM
Don't forget you are comparing a K65 to a Strafe RGB. Not sure but I think the Strafe is marketed as a better quality keyboard.
Not really had any of the issues you describe tbh with the Strafe, other than the 3rd party software which is not very good I admit but then no 3rd party software is very good.
Still functional though and I was able to work my around creating multiple lighting profiles for my keyboard..... although these days I prefer to just stick with a single solid blue backlight
I don't get the whole media keys things either, I don't need or want them really but others surely do as there's always a lot of comments from disgruntled people when keyboards don't have them.
Don't forget you are comparing a K65 to a Strafe RGB. Not sure but I think the Strafe is marketed as a better quality keyboard.
Not really had any of the issues you describe tbh with the Strafe, other than the 3rd party software which is not very good I admit but then no 3rd party software is very good.
Still functional though and I was able to work my around creating multiple lighting profiles for my keyboard..... although these days I prefer to just stick with a single solid blue backlight
I don't get the whole media keys things either, I don't need or want them really but others surely do as there's always a lot of comments from disgruntled people when keyboards don't have them.
ubercake
Senior Member
Posts: 214
Senior Member
Posts: 214
Posted on: 07/05/2018 05:12 PM
I have the non-RGB version of the Strafe at home with the Speed switches. I definitely like this for gaming, though you really have to watch the sensitivity when typing.
I had a Ducky Cherry Blue at work that I loved, but there were many noise complaints. They switched me to the non-RGB version of the Strafe keyboard with only red lighting and Silent switches which are the sound-equivalent of a non-mechanical membrane switch with nearly the same mushy feel but a higher actuation point.
The Silent switches are definitely quiet compared to the Cherry Blues.
I have the non-RGB version of the Strafe at home with the Speed switches. I definitely like this for gaming, though you really have to watch the sensitivity when typing.
I had a Ducky Cherry Blue at work that I loved, but there were many noise complaints. They switched me to the non-RGB version of the Strafe keyboard with only red lighting and Silent switches which are the sound-equivalent of a non-mechanical membrane switch with nearly the same mushy feel but a higher actuation point.
The Silent switches are definitely quiet compared to the Cherry Blues.
lightlord
Member
Posts: 32
Member
Posts: 32
Posted on: 07/05/2018 06:45 PM
I hope they fixt those silent mx switches cause i'm on my second rgb strafe already and this one also has 7 keys double tapping.
I'm not ggonna send it back because it tookk 3 months to replace the first one
I wish there was a way to fix it myself damn it.
Never ever i'm gonna buy this again PPERIODD
I hope they fixt those silent mx switches cause i'm on my second rgb strafe already and this one also has 7 keys double tapping.
I'm not ggonna send it back because it tookk 3 months to replace the first one
I wish there was a way to fix it myself damn it.
Never ever i'm gonna buy this again PPERIODD
pages 1 2
Click here to post a comment for this article on the message forum.
Senior Member
Posts: 117
I've got the original Strafe RGB and really like it. I can't stand the clicking sound of traditional mechanical keyboards which is why I held off for so long but after hearing (or not hearing!) about the silent switches on the Strafe I picked it up and it has been the best keyboard I've used by far.
I might pick this new one up as a couple of the keys on my one have broken. No fault of Corsair, just me being clumsy and dropping heaving things on it!