G.Skill Sniper 8GB CL7 DDR3 memory review -
Introduction
When we review memory DIMM modules often it's all about memory timings and the highest frequency possible, especially the latest high-end generations memories can manage 2000+ MHz, P67 and Z68 motherboards already can support 2133 MHz slices of DDR3 lovin.
Trust to be told here though is that all our reviews indicate that after 1600 MHz performance you will need to seek really hard to see a noticeable difference in performance. Hence most of our recommendations always have been this: it's better to get more memory than faster memory the better choice over faster memory.
And in that trend memory manufacturers have started to increase the density of DIMM modules. Where 1 and 2GB DIMM modules have been the standard, we now see very good progress in 4 GB DIMM modules.
Today we'll do things a little different, G.Skill designed another 8GB low voltage DDR3 kit (2x 4GB) that can be set at 1600 MHz yet still run a CAS latency of 7. And that is truly interesting because the denser the ICs get, the higher latency typically gets.
So against all rules and odds, next to that, prices caved in completely last year, right now is a very good moment to pick up some extra or new memory as the 8GB kit we test today for example only costs 120 EUR. The Sniper CAS7 kit offers 8GB in dual-channel with that memory clocked at 1600 MHz CL7, alternatively you can pick up a CAS9 Sniper kit as well, for only 80 EUR, that's 10 EUR per GB of 1600 MHz memory, yeah that's dirt cheap alright.
The end results will be very interesting, our test suite software will be run of the mill, we'll simply take all standard PC configurations and processors and compare this memory seated on a Core i7 2600K / Z68 chipset setup and evaluate it to the baseline performance of other chipsets/processors and their respective reference baseline performance.
Will these dual-channel 4GB DIMMs actually perform, will it be stable, will it be easy configurable ? Sure, heck yeah .. let's have a peek.
Recently we looked at the performance differential between DDR4 and DDR5 on Alder-Lake, Intels Gen 12th series processors. Today we review a G.Skill TridentZ5 6400 CL32 (!) DDR5 kit and fire off freq...
G.Skill TridentZ 5 DDR5 5600 CL36 review
G.Skill has prepared very well for launching a new memory standard and has presented three DDR5 series: the Trident Z5 (5600-6400 MHz), the Trident Z5 RGB (the same range as the non-RGB’s), and the Ripjaws S5 (5200-5600 MHz). They all come in 32 GB kits (2 x 16 GB), and their frequency is higher than the base 4800 MHz. Today, we are checking the G.Skill TridentZ5 5600 MHz CL36 DDR5 kit. It’s not the high-end of the series, as even the 6400 MHz CL32 are available, and the 5600 MHz is the lowest frequency you can get from this DDR5 family.
DDR5 scaling with G.Skill TridentZ5 6000 CL36 review
Recently we looked at the performance differential between DDR4 and DDR5 on Alder-Lake, Intels Gen 12th series processors. Today we review a G.Skill TridentZ5 6000 CL36 DDR5 kit and fire off frequenc...
G.Skill Z5i (Mini ITX) chassis review
This time, we're checking out the G.Skill Z5i, the first chassis from a company known the most from the RAM. Some can remember that there's an AIO (Enki) available, as well as the keyboards (like KM360), mice (and mousepad), headsets, or PSUs. The attempt is made in a not-so-popular segment, meaning the Mini-ITX (so that's one of the reasons for the mentioned limit). This choice is a brave one as it's not so easy to create a good product here. Yes, it's gaining the share, but the ATX is dominating (maybe we'll also see something from G.Skill?).