G.Skill Flare DDR3 2000 MHZ C7 AMD kit review -
Introduction
Getting groovy with C7 2000 MHz memory on your AMD PC
Over the past year we've seen a shift in the memory industry, where the fastest DDR3 memory was a hot topic last year, these days it all seems to be about normal timed DDR3 memory yet with increased memory capacity. Inserting 4GB in a PC seems to be the norm these days.
Now that doesn't mean that there are several companies out there that will try and break records, to offer the fastest most enthusiast memory kits for suited platforms. Once Core i7 launched with the triple channel memory controller, things got out of hand, we went from 1066 MHz to 1333 MHz, to 1667 MHZ to 1866 MHz and then we even passed 2000 MHz. The latest record I heard that was broken was at 2500 something MHz I think.
It is all quite funky as when we go back to the PC era where the FSB rules the norm was 677 and 800 MHz DDR2 memory. As such memory has taken a huge shift in both capacity, frequency but also latency.
For AMD's products however there is very little memory available in the enthusiast segment. Really you need to look hard to find suitable memory that can take over ~1600 MHz and actually remain stable. As such G.Skill recently worked together with ASUS on some funky new 'FLARE' series memory.
These kits are optimized for AMD platforms preferably with the new six-core X6 processors, and in specific some ASUS motherboards. The kit we'll be testing today obviously comes from that series and is a 2,000MHz CL7-9-7-24 1.65V 4GB (2GBx2) DDR3 kit with its latest Flare heatsinks. Now to achieve 2000 MHz on the memory on an AMD platform is a challenge. Yet with supported XMP profiles in the BIOS you flick a switch and boom, the system configures itself for some really sweet low latency memory frequency and thus bandwidth.
The 2,000MHz CL7-9-7-24 1.65V 4GB (2GBx2) DDR3 kit are designed and optimized for the latest 6-core processors, that doesn't mean though your 'generic' X4 processor" won't work. No Sir. Have a peek at the coolness, and head on to the next page.
Recently we looked at the performance differential between DDR4 and DDR5 on Alder-Lake, Intels Gen 12th series processors. Today we review a G.Skill TridentZ5 6400 CL32 (!) DDR5 kit and fire off freq...
G.Skill TridentZ 5 DDR5 5600 CL36 review
G.Skill has prepared very well for launching a new memory standard and has presented three DDR5 series: the Trident Z5 (5600-6400 MHz), the Trident Z5 RGB (the same range as the non-RGB’s), and the Ripjaws S5 (5200-5600 MHz). They all come in 32 GB kits (2 x 16 GB), and their frequency is higher than the base 4800 MHz. Today, we are checking the G.Skill TridentZ5 5600 MHz CL36 DDR5 kit. It’s not the high-end of the series, as even the 6400 MHz CL32 are available, and the 5600 MHz is the lowest frequency you can get from this DDR5 family.
DDR5 scaling with G.Skill TridentZ5 6000 CL36 review
Recently we looked at the performance differential between DDR4 and DDR5 on Alder-Lake, Intels Gen 12th series processors. Today we review a G.Skill TridentZ5 6000 CL36 DDR5 kit and fire off frequenc...
G.Skill Z5i (Mini ITX) chassis review
This time, we're checking out the G.Skill Z5i, the first chassis from a company known the most from the RAM. Some can remember that there's an AIO (Enki) available, as well as the keyboards (like KM360), mice (and mousepad), headsets, or PSUs. The attempt is made in a not-so-popular segment, meaning the Mini-ITX (so that's one of the reasons for the mentioned limit). This choice is a brave one as it's not so easy to create a good product here. Yes, it's gaining the share, but the ATX is dominating (maybe we'll also see something from G.Skill?).