Razer Leviathan V2 gaming soundbar review
Guru3D NVMe Thermal Test - the heatsink vs. performance
EnGenius ECW220S 2x2 Cloud Access Point review
Alphacool Eisbaer Aurora HPE 360 LCS cooler review
Noctua NH-D12L CPU Cooler Review
Silicon Power XPOWER XS70 1TB NVMe SSD Review
Hyte Y60 chassis review
ASUS ROG Thor 1000W Platinum II (1000W PSU) review
ASUS ROG Rapture GT-AXE11000 WIFI6E router review
Backforce One Plus Gaming Chair review
DeepCool Assassin III review -
Article
by on: 09/27/2019 10:52 AM [
] 15 comment(s)
] 15 comment(s)
DeepCool Assassin III
One of their most impressive Heatpipe coolers to date?
We test and review the DeepCool Assassin III, a heat pipe cooler that is showing very impressive results in both cooling performance and low acoustics. A cooler that can keep up with the NH-D15 from Noctua? is that confidence in this cooler warranted?
The Deepcool Assassin III reaches almost 1760mm in height, has a massive dual-aluminum (nickel-plated) radiator that was fitted with seven heat pipes and two 140-mm fans (low RPM). We mentioned the Noctua reference already, but DeepCool claims this beast can manage up to 280W of cooling, which certainly is enough for any modern age processor, even overclocked.
The Assassin III was also designed with high profile memory in mind, meaning it is compatible with high-end DRAM DIMM modules of up to 54 mm in height. The product is compatible with all modern processors sockets from both AMD and Intel (through compatibility with TR4 was not listed (Threadripper)). Included are two fans, the cooler, resistor wires for even lower RPM, a screwdriver and very funny, a thermal paste syringe, an alcohol scrub to clean the processor as well as a thin piece of plastic if you want to scrape thermal paste out thin over the heat spreader, we'll show you that in the review though. Deepcool plans to sell this premium cooler at MSRP of $89,- which is LCS territory already these days.
Yeah, have a peek ...
Deepcool AS500 PLUS CPU Cooler Review
We review the Deepcool AS500 PLUS. This dual fan-based CPU cooler absolutely impresses in looks, features as well as performance. It's easily tagged as a high-end performing air-cooler with low nois...
Deepcool AK400 air cooler review
Today, we are reviewing an air cooler from Deepcool; it’s an AK400. The AK400 is from the same family as the AK620 (a dual-tower cooler). The previous product of this type (air cooler) covered was the AS500, tested back at the end of 2020. It was so good (it earned the “Approved” award) that it stayed as a part of the chassis test suite. This time around, it’s also a single tower design cooler, with a four heat pipe tower layout, a unique matrix fin design, and a high-performance FDB fan that should provide excellent heat dissipation and low noise levels.
Deepcool CK560 chassis review
This time, we’re checking out the Deepcool CK560, an airflow-oriented mid-sized ATX tower PC chassis. I had an almost instant deja-vu when I saw the first materials about it. Why’s that? It looks almost exactly the same as the other Deepcool (previously also named GamerStorm) product, I mean the CG560, which I had in my hands for a review. Well, the front panel looks a bit different, but that’s not a significant change. Let’s check the other things as well.
Deepcool PQ1000M (1000W PSU) review
Today we’re putting the new Deepcool PQ1000M power supply on our test bench. The company is rather known for making the chassis, coolers, or fans, but two power supplies were already covered on guru3d. The first one was the DQ750-M back in 2018, a 750 Watt unit with an 80 Plus Gold certificate that earned the “Recommended” award. The second one was the DQ850-M-V2L which was reviewed in 2020, bringing, for example, the 10-year warranty (instead of 5-years), but on the other side – it was rather noisy in low-mid load. Another two years have passed (coincidence?), and the next unit from Deepcool is in our hands, again with more wattage (it looks like a rule).
We review the Deepcool AS500 PLUS. This dual fan-based CPU cooler absolutely impresses in looks, features as well as performance. It's easily tagged as a high-end performing air-cooler with low nois...
Deepcool AK400 air cooler review
Today, we are reviewing an air cooler from Deepcool; it’s an AK400. The AK400 is from the same family as the AK620 (a dual-tower cooler). The previous product of this type (air cooler) covered was the AS500, tested back at the end of 2020. It was so good (it earned the “Approved” award) that it stayed as a part of the chassis test suite. This time around, it’s also a single tower design cooler, with a four heat pipe tower layout, a unique matrix fin design, and a high-performance FDB fan that should provide excellent heat dissipation and low noise levels.
Deepcool CK560 chassis review
This time, we’re checking out the Deepcool CK560, an airflow-oriented mid-sized ATX tower PC chassis. I had an almost instant deja-vu when I saw the first materials about it. Why’s that? It looks almost exactly the same as the other Deepcool (previously also named GamerStorm) product, I mean the CG560, which I had in my hands for a review. Well, the front panel looks a bit different, but that’s not a significant change. Let’s check the other things as well.
Deepcool PQ1000M (1000W PSU) review
Today we’re putting the new Deepcool PQ1000M power supply on our test bench. The company is rather known for making the chassis, coolers, or fans, but two power supplies were already covered on guru3d. The first one was the DQ750-M back in 2018, a 750 Watt unit with an 80 Plus Gold certificate that earned the “Recommended” award. The second one was the DQ850-M-V2L which was reviewed in 2020, bringing, for example, the 10-year warranty (instead of 5-years), but on the other side – it was rather noisy in low-mid load. Another two years have passed (coincidence?), and the next unit from Deepcool is in our hands, again with more wattage (it looks like a rule).
© 2022
