Radeon RX 590 (PowerColor Red Devil) review
ASUS ROG GeForce RTX 2070 STRIX review
Corsair K70 RGB MK.2 Low Profile RAPIDFIRE review
Battlefield V: PC graphics performance benchmarks
Apacer Panther Rage DDR4 RGB 3200 MHz DDR4 review
ASUS ROG STRIX Z390-E Gaming review
MSI GeForce RTX 2070 Gaming Z review
Corsair H115i Platinum review
Guru3D Rig of the Month - October 2018
Cooler Master MasterCase SL600M review
NZXT Kraken X72 Review
Posted by: on: 04/17/2018 08:22 AM [
19 comment(s) ]
NZXT just super-sized their Kraken series liquid coolers, meet the x72 for cases with 360 mm radiator mounts. This new cooler is compatible with CAM software. This allows you to program, customize and monitor this all-in-one liquid cooling solution for your processor. Armed with three 120mm PWM fans and a nice radiator to go with it, the performance is really good, next to being extremely silent, NZXT probably has got the best-LED lighting system implementation in the industry as well.
Read article
Advertisement
Tagged as:
NZXT
Hilbert Hagedoorn
Don Vito Corleone
Posts: 33709
Don Vito Corleone
Posts: 33709
Posted on: 04/17/2018 11:29 AM
That was a typo, already fixed.
That was a typo, already fixed.
Kruger1863
Junior Member
Posts: 4
Junior Member
Posts: 4
Posted on: 04/17/2018 12:27 PM
They should better do something with their QC. Every second pump fails within 6-10 months. See newegg reviews. Also CAM software quality is already funny. Every update breaks something that had fixed by previous ones.
They should better do something with their QC. Every second pump fails within 6-10 months. See newegg reviews. Also CAM software quality is already funny. Every update breaks something that had fixed by previous ones.
Koniakki
Senior Member
Posts: 2628
Senior Member
Posts: 2628
Posted on: 04/17/2018 12:32 PM
Another win for the H110i GT again, but nonetheless excellent cooling here by the NZXT X72.
And not to mention silent too. 32dB on performance mode? Nice!
Another win for the H110i GT again, but nonetheless excellent cooling here by the NZXT X72.
And not to mention silent too. 32dB on performance mode? Nice!
That was a typo, already fixed.
amit
Senior Member
Posts: 223
Senior Member
Posts: 223
Posted on: 04/17/2018 01:23 PM
Thats a nice looking block! Wonder if similar is available in DIY market? Would love to have one for my loop.
Thats a nice looking block! Wonder if similar is available in DIY market? Would love to have one for my loop.
hapkiman
Member
Posts: 66
Member
Posts: 66
Posted on: 04/17/2018 03:33 PM
Always liked NZXT as a company, but I'll have to say I was disappointed in the X62. Had nothing but issues with one I put in a build I made about three months ago, and the CAM software was awful. Pumped failed and although they replaced it - I ended up removing it and installing a Corsair H110v2. Hope this X72 is better QC'ed.
Always liked NZXT as a company, but I'll have to say I was disappointed in the X62. Had nothing but issues with one I put in a build I made about three months ago, and the CAM software was awful. Pumped failed and although they replaced it - I ended up removing it and installing a Corsair H110v2. Hope this X72 is better QC'ed.
Noisiv
Senior Member
Posts: 6453
Senior Member
Posts: 6453
Posted on: 04/17/2018 04:42 PM
Wow impressive results!
It would be much easier to judge the true Acoustic/thermal performance if additionally we had charts like:
- dBA sound level measured at the fixed temperature
and/or
- temperature measured at fixed dBA
With charts as it is (dBA chart, temps chart) its somewhat complicated to judge the combined acoustic/temp performance, and one has to switch between the two charts and try to make educated guess (something like 1/(Temp * dBA level).
Wow impressive results!
It would be much easier to judge the true Acoustic/thermal performance if additionally we had charts like:
- dBA sound level measured at the fixed temperature
and/or
- temperature measured at fixed dBA
With charts as it is (dBA chart, temps chart) its somewhat complicated to judge the combined acoustic/temp performance, and one has to switch between the two charts and try to make educated guess (something like 1/(Temp * dBA level).
Embra
Senior Member
Posts: 711
Senior Member
Posts: 711
Posted on: 04/17/2018 04:48 PM
Thank you HH!
Thank you HH!
StewieTech
Chuck Norris
Posts: 2532
Chuck Norris
Posts: 2532
Posted on: 04/17/2018 05:00 PM
Hey thanks for the review double H. Yeah i have no use for such a monster, im not quite the overclocker id like to be. Still a nice product.
Hey thanks for the review double H. Yeah i have no use for such a monster, im not quite the overclocker id like to be. Still a nice product.
Jordan_t
Junior Member
Posts: 3
Junior Member
Posts: 3
Posted on: 04/17/2018 09:48 PM
Hi,
Nice article!
I'm still wondering what can decide me to go for a similar solution instead of the NH D15. Is this kind of solution really worth the money? (especially considering the fact that I do not care about the aesthetic part)
Or am I missing something?
Thx for your feedbacks.
Hi,
Nice article!
I'm still wondering what can decide me to go for a similar solution instead of the NH D15. Is this kind of solution really worth the money? (especially considering the fact that I do not care about the aesthetic part)
Or am I missing something?
Thx for your feedbacks.
insp1re2600
Senior Member
Posts: 393
Senior Member
Posts: 393
Posted on: 04/17/2018 10:03 PM
Hi,
Nice article!
I'm still wondering what can decide me to go for a similar solution instead of the NH D15. Is this kind of solution really worth the money? (especially considering the fact that I do not care about the aesthetic part)
Or am I missing something?
Thx for your feedbacks.
this is nice, but iv always enjoyed my h105, no issue cooling any oc from 3770k to 6700k so far.
Hi,
Nice article!
I'm still wondering what can decide me to go for a similar solution instead of the NH D15. Is this kind of solution really worth the money? (especially considering the fact that I do not care about the aesthetic part)
Or am I missing something?
Thx for your feedbacks.
this is nice, but iv always enjoyed my h105, no issue cooling any oc from 3770k to 6700k so far.
fry178
Senior Member
Posts: 878
Senior Member
Posts: 878
Posted on: 04/17/2018 10:42 PM
@Jordantt
You usually lower noise as water is a better medium to transport heat, and most of the time it will lower temps inside the case, which lowers temps for gpu etc (if rad is setup as exhaust), as heat is dumped outside the case, while keeping fans silent.
Most of the time i can stay about 30*C below max allowed temp (cpu), and even that i oced my 1080 to run around 1.9 to 2.1ghz with maxed out power and voltage, and its still not passing 84*C (80 with stock fan profile).
But main reason for me is the absolute silence when idle/low load, you basically have to look at the power led or my moni, to know if its running..
Edit: i dont run any of fans that come with an aio (except maybe on alphakool/EK units),
so i never hear fan related "noise", and the pump on the H60i and now the H110i
are only audible when i take of the side cover.
@Jordantt
You usually lower noise as water is a better medium to transport heat, and most of the time it will lower temps inside the case, which lowers temps for gpu etc (if rad is setup as exhaust), as heat is dumped outside the case, while keeping fans silent.
Most of the time i can stay about 30*C below max allowed temp (cpu), and even that i oced my 1080 to run around 1.9 to 2.1ghz with maxed out power and voltage, and its still not passing 84*C (80 with stock fan profile).
But main reason for me is the absolute silence when idle/low load, you basically have to look at the power led or my moni, to know if its running..
Edit: i dont run any of fans that come with an aio (except maybe on alphakool/EK units),
so i never hear fan related "noise", and the pump on the H60i and now the H110i
are only audible when i take of the side cover.
JamesSneed
Senior Member
Posts: 368
Senior Member
Posts: 368
Posted on: 04/17/2018 11:16 PM
@Jordantt
You usually lower noise as water is a better medium to transport heat, and most of the time it will lower temps inside the case, which lowers temps for gpu etc (if rad is setup as exhaust), as heat is dumped outside the case, while keeping fans silent.
Most of the time i can stay about 30*C below max allowed temp (cpu), and even that i oced my 1080 to run around 1.9 to 2.1ghz with maxed out power and voltage, and its still not passing 84*C (80 with stock fan profile).
But main reason for me is the absolute silence when idle/low load, you basically have to look at the power led or my moni, to know if its running..
The same reasons could be said for the NH-D15 if you can fit it. Most AIO coolers are louder than the NH-D15 in perceived noise ie pump plus fans. I have a NH-D15 cooling a Ryzen 1800x and it dumps directly out the case as well. The NZXT x72 does seem to outperform the NH-D15 in both noise and cooling which I believe is a first for a AIO so its worth considering if one can fit a 360mm rad. Personally I like air coolers for the simplicity and if they ever fail ie fans break the CPU throttles down but never any damage to anything.
@Jordantt
You usually lower noise as water is a better medium to transport heat, and most of the time it will lower temps inside the case, which lowers temps for gpu etc (if rad is setup as exhaust), as heat is dumped outside the case, while keeping fans silent.
Most of the time i can stay about 30*C below max allowed temp (cpu), and even that i oced my 1080 to run around 1.9 to 2.1ghz with maxed out power and voltage, and its still not passing 84*C (80 with stock fan profile).
But main reason for me is the absolute silence when idle/low load, you basically have to look at the power led or my moni, to know if its running..
The same reasons could be said for the NH-D15 if you can fit it. Most AIO coolers are louder than the NH-D15 in perceived noise ie pump plus fans. I have a NH-D15 cooling a Ryzen 1800x and it dumps directly out the case as well. The NZXT x72 does seem to outperform the NH-D15 in both noise and cooling which I believe is a first for a AIO so its worth considering if one can fit a 360mm rad. Personally I like air coolers for the simplicity and if they ever fail ie fans break the CPU throttles down but never any damage to anything.
fry178
Senior Member
Posts: 878
Senior Member
Posts: 878
Posted on: 04/18/2018 01:44 AM
well, at least corsair covers ANY component inside the pc that gets damaged if the aio fails (as long as the aio is under warranty), so i dont really worry about that.
well, at least corsair covers ANY component inside the pc that gets damaged if the aio fails (as long as the aio is under warranty), so i dont really worry about that.
Jordan_t
Junior Member
Posts: 3
Junior Member
Posts: 3
Posted on: 04/18/2018 08:33 AM
It's exactly what I was thinking.
@fry178 / @JamesSneed Thanks for you answers. What would be your final choice if your main criteria are silence and performance? (without regarding the price nor the aesthetic)
@JamesSneed what kind of fan are you using?
The same reasons could be said for the NH-D15 if you can fit it. Most AIO coolers are louder than the NH-D15 in perceived noise ie pump plus fans. I have a NH-D15 cooling a Ryzen 1800x and it dumps directly out the case as well. The NZXT x72 does seem to outperform the NH-D15 in both noise and cooling which I believe is a first for a AIO so its worth considering if one can fit a 360mm rad. Personally I like air coolers for the simplicity and if they ever fail ie fans break the CPU throttles down but never any damage to anything.
It's exactly what I was thinking.
@fry178 / @JamesSneed Thanks for you answers. What would be your final choice if your main criteria are silence and performance? (without regarding the price nor the aesthetic)
@JamesSneed what kind of fan are you using?
Koniakki
Senior Member
Posts: 2628
Senior Member
Posts: 2628
Posted on: 04/18/2018 10:48 AM
It's exactly what I was thinking.
@fry178 / @JamesSneed Thanks for you answers. What would be your final choice if your main criteria are silence and performance? (without regarding the price nor the aesthetic)
@JamesSneed what kind of fan are you using?
Be Quiet! Dark Rock TF and possibly Dark Rock PRO 4 for more silence with good perf.
It's exactly what I was thinking.
@fry178 / @JamesSneed Thanks for you answers. What would be your final choice if your main criteria are silence and performance? (without regarding the price nor the aesthetic)
@JamesSneed what kind of fan are you using?
Be Quiet! Dark Rock TF and possibly Dark Rock PRO 4 for more silence with good perf.
JamesSneed
Senior Member
Posts: 368
Senior Member
Posts: 368
Posted on: 04/18/2018 01:03 PM
@Jordan_t I have 2 Phanteks PH-F140MP's on the NH-D15. I have those two fans on the NH-D15 and the rear exhaust which is another Phanteks 140mm fan all driven by the CPU temp. They are all connected to the CPU fan headers(have 2 headers) which spin up the fans under load.
I have a custom profile in the BIOS controlling the fans that I setup after doing some CPU temp monitoring and making notes on temps. So under 99% of load conditions like playing games etc the fans are usually under 1000 RPM.
@Jordan_t I have 2 Phanteks PH-F140MP's on the NH-D15. I have those two fans on the NH-D15 and the rear exhaust which is another Phanteks 140mm fan all driven by the CPU temp. They are all connected to the CPU fan headers(have 2 headers) which spin up the fans under load.
I have a custom profile in the BIOS controlling the fans that I setup after doing some CPU temp monitoring and making notes on temps. So under 99% of load conditions like playing games etc the fans are usually under 1000 RPM.
BahamutxD
Senior Member
Posts: 260
Senior Member
Posts: 260
Posted on: 04/18/2018 01:08 PM
As much as I want to like AIOs I just can't. Can't relly justify the high value and risk over a decent Air Coooled solution.
Can't understand how NZXT haven't scrapped that CAM software already and built one (decent this time) from zero. They are just limitting/ruining customers experience with it.
As much as I want to like AIOs I just can't. Can't relly justify the high value and risk over a decent Air Coooled solution.
Can't understand how NZXT haven't scrapped that CAM software already and built one (decent this time) from zero. They are just limitting/ruining customers experience with it.
fry178
Senior Member
Posts: 878
Senior Member
Posts: 878
Posted on: 04/19/2018 01:48 PM
@Jordan_t
Artic silent for case (0.3 and 0.08 sone versions) and blacknoise multiframe for radiator, all controlled by the board (turbo profile, so silent on low load, but spin up quickly under load, but since all are running below 900rpm, still silent).
@Jordan_t
Artic silent for case (0.3 and 0.08 sone versions) and blacknoise multiframe for radiator, all controlled by the board (turbo profile, so silent on low load, but spin up quickly under load, but since all are running below 900rpm, still silent).
Click here to post a comment for this article on the message forum.
Junior Member
Posts: 15
Hmm.. I don't get how a 360 cooler can fit on 280 mounts. Large parts will be outside the grill mesh no? Or is it should be 360 as the X62 is the 280 raditor.
Kind regards.
B.