ASUS GeForce RTX 2080 STRIX OC 8G review
Crucial BX500 480 GB SSD review
MSI GeForce RTX 2080 Ti DUKE review
Gigabyte GeForce RTX 2080 GAMING OC 8G review
MSI GeForce RTX 2080 Ti Gaming X TRIO review
Asus GeForce RTX 2080 Ti RoG Strix review
GeForce RTX 2080 Founders review
GeForce RTX 2080 Ti Founders review
HyperX Predator DDR4 RGB 32GB 2933 MHz review
Nvidia Turing GeForce 2080 (Ti) architecture review
Guru3D Rig of the Month - February 2016
Posted by: on: 02/29/2016 09:57 AM [
12 comment(s) ]
It is time for the February edition of the Guru3D Rig of the Month. This months build originates from Paris - France where 42 years old Triptyk has a build called .. “Hoth”.
Read article
Advertisement
Tagged as:
Rig of the Month
Koniakki
Senior Member
Posts: 2559
Senior Member
Posts: 2559
Posted on: 02/29/2016 12:30 PM
Excellent work! Looks amazing.
Mine seems so plain now!
Excellent work! Looks amazing.
Mine seems so plain now!
weasel
Senior Member
Posts: 676
Senior Member
Posts: 676
Posted on: 02/29/2016 01:11 PM
Ok we just found the Guru3D Rig of the Month - March 2016 nice rig Koniakki
Ok we just found the Guru3D Rig of the Month - March 2016 nice rig Koniakki
Koniakki
Senior Member
Posts: 2559
Senior Member
Posts: 2559
Posted on: 02/29/2016 01:18 PM
Thank you weasel. Between work and IRL stuff it took me 1 week to finished it. It felt like a month tho.
It came out a bit different than how I had imagined it the first time but I think it came out nice.
I really like the Sentry Mesh fan controller's position.
upload
P.S: But the real build would be around summer or a bit after. It would be one of a kind Core P5 mod. Never been done.
Ok we just found the Guru3D Rig of the Month - March 2016 nice rig Koniakki
Thank you weasel. Between work and IRL stuff it took me 1 week to finished it. It felt like a month tho.
It came out a bit different than how I had imagined it the first time but I think it came out nice.
I really like the Sentry Mesh fan controller's position.
upload
P.S: But the real build would be around summer or a bit after. It would be one of a kind Core P5 mod. Never been done.
weasel
Senior Member
Posts: 676
Senior Member
Posts: 676
Posted on: 02/29/2016 01:25 PM
Koniakki could you maybe upload another from the side a bit further i love the looks of the case just like this months winner.Its awesome to watch something totally different i might consider replacing my Obsidian750D for this case.
.
I hope you will show us the buildlog in the summer
Koniakki could you maybe upload another from the side a bit further i love the looks of the case just like this months winner.Its awesome to watch something totally different i might consider replacing my Obsidian750D for this case.
.
I hope you will show us the buildlog in the summer
Koniakki
Senior Member
Posts: 2559
Senior Member
Posts: 2559
Posted on: 02/29/2016 02:00 PM
Koniakki could you maybe upload another from the side a bit further i love the looks of the case just like this months winner.Its awesome to watch something totally different i might consider replacing my Obsidian750D for this case..
I hope you will show us the buildlog in the summer
I will try uploading more photos from all directions.
One small note tho. As much as I like the Core P5's uniqueness, its has almost 0 airflow going on, especially compared to my previous HAF-X case.
So people should expect an increase in their temps, mostly under load conditions. I think its around 5-8'C for the CPU(based on my loop) and about +10-15'C for the GPU.
Those are my preliminary findings so don't blame anyone or anything. More testing is needed. But its not a big issue imo.
And also the GPU should be installed 1 or 2 slot further back because under load the GPU its "choking" in its own hot exhaust air when the front panel is installed. I have seen +15'C with it on.
Other than the obvious airflow issues(not complaining, its an open case of course), the case is a dream!
Koniakki could you maybe upload another from the side a bit further i love the looks of the case just like this months winner.Its awesome to watch something totally different i might consider replacing my Obsidian750D for this case.
.
I hope you will show us the buildlog in the summer
I will try uploading more photos from all directions.
One small note tho. As much as I like the Core P5's uniqueness, its has almost 0 airflow going on, especially compared to my previous HAF-X case.
So people should expect an increase in their temps, mostly under load conditions. I think its around 5-8'C for the CPU(based on my loop) and about +10-15'C for the GPU.
Those are my preliminary findings so don't blame anyone or anything. More testing is needed. But its not a big issue imo.
And also the GPU should be installed 1 or 2 slot further back because under load the GPU its "choking" in its own hot exhaust air when the front panel is installed. I have seen +15'C with it on.
Other than the obvious airflow issues(not complaining, its an open case of course), the case is a dream!
Singleton99
Senior Member
Posts: 954
Senior Member
Posts: 954
Posted on: 02/29/2016 05:02 PM
nice rig ,,, good work
nice rig ,,, good work
demented brave
Senior Member
Posts: 286
Senior Member
Posts: 286
Posted on: 02/29/2016 06:48 PM
Very cool! Why not put an acrylic water block on that GPU though?
Very cool! Why not put an acrylic water block on that GPU though?
Extraordinary
Senior Member
Posts: 18759
Senior Member
Posts: 18759
Posted on: 02/29/2016 07:09 PM
I wouldn't kick it out of bed for farting
I wouldn't kick it out of bed for farting
Triptyk
Junior Member
Posts: 1
Junior Member
Posts: 1
Posted on: 03/01/2016 01:04 AM
Hi,
Thank you very much for your compliments , it's a nice reward for my work
@demented brave : I found that the cooler of the 980 TI HOF fit very well with this black & white theme , so I left the original, but I think integrate a waterblock in the loop in few weeks
Hi,
Thank you very much for your compliments , it's a nice reward for my work
@demented brave : I found that the cooler of the 980 TI HOF fit very well with this black & white theme , so I left the original, but I think integrate a waterblock in the loop in few weeks
ScoobyDooby
Senior Member
Posts: 7064
Senior Member
Posts: 7064
Posted on: 03/01/2016 03:53 AM
I like the look of the components and watercooling work for sure, but I really don't care for this open thermaltake chassis.. just looks stupid imo.
Nice work though, no doubt about it!
I like the look of the components and watercooling work for sure, but I really don't care for this open thermaltake chassis.. just looks stupid imo.
Nice work though, no doubt about it!
Borys
Member
Posts: 40
Member
Posts: 40
Posted on: 03/01/2016 05:28 PM
GREAT rig and very beautiful!
This colors to me are the best theme for a rig... with the blue led is perfect!
Congratulations man!
GREAT rig and very beautiful!
This colors to me are the best theme for a rig... with the blue led is perfect!
Congratulations man!
Click here to post a comment for this article on the message forum.
Senior Member
Posts: 676
Amazing rig really i love the black and white theme