Intel Core i5 11400F processor review
Corsair Vengeance RGB Pro SL 3600 MHz 32GB review
ASRock Z590 Extreme review
Gigabyte Radeon RX 6700 XT Gaming OC review
Corsair K70 RGB TKL keyboard review
Corsair RM650x (2021) power supply review
be quiet! Silent Loop 2 280mm review
Corsair K55 RGB PRO XT keyboard review
Guru3D Rig of the Month - March 2021
Intel Core i9-11900K processor review
EK P360 Performance Liquid Cooling KIT review
Posted by: on: 05/03/2016 09:03 AM [
7 comment(s) ]
EK has released a liquid cooling kit consisting out of all components needed to assemble and design your own liquid cooling loop. In this review we will build a performance class PC and test this kit on a Core i7 6700K processor. The end result is a setup that is surpassing any AIO kit in both performance and low noise levels. Even overclocked the results are terrific!
Read article
Advertisement
Tagged as:
ek
pages 1 2
RonanH
Member
Posts: 66
Member
Posts: 66
Posted on: 05/03/2016 11:02 AM
So with the inverted chassis you have to use the rad as an intake? That's great for your cpu temps but won't it increase chassis temps and also gpu temps?
So with the inverted chassis you have to use the rad as an intake? That's great for your cpu temps but won't it increase chassis temps and also gpu temps?
ivymike10mt
Senior Member
Posts: 226
Senior Member
Posts: 226
Posted on: 05/03/2016 11:54 AM
Looks okay. Just Titan should get loop as well - thats the loudest point i guess.
Looks okay. Just Titan should get loop as well - thats the loudest point i guess.
wsgroves
Senior Member
Posts: 164
Senior Member
Posts: 164
Posted on: 05/03/2016 04:09 PM
How hard is it to add say 2x gpu blocks to the loop? A boat load of work? Wonder if its enough to handle say 2x 980ti's +cpu. I dont have much exp with custom water but am interested in it.
How hard is it to add say 2x gpu blocks to the loop? A boat load of work? Wonder if its enough to handle say 2x 980ti's +cpu. I dont have much exp with custom water but am interested in it.
fantaskarsef
Senior Member
Posts: 12158
Senior Member
Posts: 12158
Posted on: 05/03/2016 04:20 PM
Well for two 980TIs plus a CPU this won't be sufficient, maybe a start
But the more blocks (three that way) you have, the stronger the pump should be (the included D5 pump is strong enough for that though, I'm running the same pump with a way more restrictive setup).
Also, you would need at least one fan (on a rad) per component to cool, the more the better also... so with that starting kit I think you won't be able to do that if you're not going for the 360 rad (3x120mm fan on there), or even adding a second rad + fans.
What I say is that you might not want to use that premixed cooling... I use destilled water with biocides (against algae) as well as a silver coil in there (for the same reason). I am avoiding premixed things as I've heard that old coolant can clog up your loop eventually. Also, changing the cooling in case you change your setup is easier when you just have to refill destilled water until you're full again, and adding a few single drops of biocide.
If you do that, include another rad and/or more blocks, you should also make sure to count all the fittings and parts you need, as well as probably getting some more tubing.
But in any way, if you plan to do a true custom water cooling loop, make a build thread, and be warned that it might cost some money there... especially if you're going for GPUs, which will need new blocks once you change them, etc....
How hard is it to add say 2x gpu blocks to the loop? A boat load of work? Wonder if its enough to handle say 2x 980ti's +cpu. I dont have much exp with custom water but am interested in it.
Well for two 980TIs plus a CPU this won't be sufficient, maybe a start
But the more blocks (three that way) you have, the stronger the pump should be (the included D5 pump is strong enough for that though, I'm running the same pump with a way more restrictive setup).
Also, you would need at least one fan (on a rad) per component to cool, the more the better also... so with that starting kit I think you won't be able to do that if you're not going for the 360 rad (3x120mm fan on there), or even adding a second rad + fans.
What I say is that you might not want to use that premixed cooling... I use destilled water with biocides (against algae) as well as a silver coil in there (for the same reason). I am avoiding premixed things as I've heard that old coolant can clog up your loop eventually. Also, changing the cooling in case you change your setup is easier when you just have to refill destilled water until you're full again, and adding a few single drops of biocide.
If you do that, include another rad and/or more blocks, you should also make sure to count all the fittings and parts you need, as well as probably getting some more tubing.
But in any way, if you plan to do a true custom water cooling loop, make a build thread, and be warned that it might cost some money there... especially if you're going for GPUs, which will need new blocks once you change them, etc....
pages 1 2
Click here to post a comment for this article on the message forum.
Senior Member
Posts: 12158
Small custom loop that beats any AIO in HH's benchmarks. Not bad, also rather quiet in use. Sure it's not cheap, but the numbers speak for themselves (you can push 1.5v into it and still end up at the level of stock air cooling...).