GALAX GeForce RTX 2070 Super WTF review
ADATA Spectrix S40G 512GB NVMe M.2 SSD review
Red Dead Redemption 2: PC graphics performance benchmark review
XFX Radeon RX 5700 XT THICC III Ultra review
Promo: URcdkey Halloween sale Windows 10 Pro for 11$
Guru3D Rig of the Month - October 2019
MSI GeForce GTX 1660 SUPER GAMING X review
Gigabyte GTX 1660 SUPER GAMING OC review
Palit GeForce GTX 1660 SUPER GamingPRO OC review
ZOTAC GeForce GTX 1660 SUPER AMP review
Corsair Vengeance RGB DDR4 memory review
Posted by: on: 03/21/2017 02:11 PM [
10 comment(s) ]
In this article we review the new RGB series Vengeance DDR4 memory from Corsair. Not only do these puppies look awesome, they are properly specced as well. We received a 4x8GB DDR4 3000MHz CAS 15 DRAM kit from Corsair, so that is 32GB at your disposal for dual and even quad-channel memory configurations.
Read article
Advertisement
Tagged as:
corsair
Unilythe
Member
Posts: 78
Member
Posts: 78
Posted on: 03/21/2017 04:08 PM
I love how sleek it looks. The RGB isn't tacky on it either.
I know it's superficial and a lot of people are on the "hate RGB" bandwagon, but I really like it.
I love how sleek it looks. The RGB isn't tacky on it either.
I know it's superficial and a lot of people are on the "hate RGB" bandwagon, but I really like it.
Incredible Lama
Senior Member
Posts: 132
Senior Member
Posts: 132
Posted on: 03/21/2017 06:52 PM
I would like to know how these stack up against the G.Skill Trident Z RGB
Also, I wonder why they use LINK and didn't utilise CUE2 for this. If I ever get these I'd like them to work together with my keyboard and such.
I would like to know how these stack up against the G.Skill Trident Z RGB
Also, I wonder why they use LINK and didn't utilise CUE2 for this. If I ever get these I'd like them to work together with my keyboard and such.
chispy
Senior Member
Posts: 8758
Senior Member
Posts: 8758
Posted on: 03/21/2017 07:09 PM
Great review as always Hilbert ! I do like the high end stylish black matte color of the heatsinks with RGB look of this kit over the G.Skill Trident Z RGB.
Great review as always Hilbert ! I do like the high end stylish black matte color of the heatsinks with RGB look of this kit over the G.Skill Trident Z RGB.
ScoobyDooby
Senior Member
Posts: 7089
Senior Member
Posts: 7089
Posted on: 03/21/2017 07:20 PM
Great review, quite a few typos though..
"the memory bandwidth numbers will chance dramatically"
I know, I know.. I hate to be that guy :|
Great review, quite a few typos though..
"the memory bandwidth numbers will chance dramatically"
I know, I know.. I hate to be that guy :|
hapkiman
Member
Posts: 67
Member
Posts: 67
Posted on: 03/22/2017 03:08 AM
I guess I'm the only one out there that isn't fascinated with all the RGB lighting lately. Lighted RAM, lighted AIO coolers, lighted graphics cards, lighted fans, and cases with lighting strips all over them. What's next? Lights that mount on your arms and hands- or maybe a jump suit with lights all over it to wear while your gaming and a RGB lit helmet?
I guess I'm the only one out there that isn't fascinated with all the RGB lighting lately. Lighted RAM, lighted AIO coolers, lighted graphics cards, lighted fans, and cases with lighting strips all over them. What's next? Lights that mount on your arms and hands- or maybe a jump suit with lights all over it to wear while your gaming and a RGB lit helmet?
thatguy91
Senior Member
Posts: 6648
Senior Member
Posts: 6648
Posted on: 03/22/2017 03:52 AM
Lighting looks great, however there are some very important downsides that you must consider before going towards a lit build:
it only suits cases with side Windows
silent cases aren't so silent with a side window, so best option would be to opt for a case with airflow instead if going for a lit case
cases on the floor to the right of the desk will meant the window is facing the desk, no good if the desk is largely solid on that side (or has draws etc)
if the case is in the bedroom at night and you have it on encoding or whatnot whilst sleeping, you have a pretty bright nightlight (positive or negative
?)
if the computer is on the right side on top of the desk the lighting can often be distracting
the lighting may look good now, but in two years time when you still have the same build, will it be cheesy?
current options are 'showey', if they still have them in the future I believe they will be more 'glowey'
how much extra cost does lighting add to manufacturing, and how much extra do you pay for the end product currently for the privilege of having lighting?
So if you do have a case with a side window, I think subtle glows of certain colours would be better than a randow mix of reasonably bright colour. By subtle glow I mean something that won't light the side of your face if you are in a dark room with the computer on the desk next to you. Adjustable brightness LED's would be nice. Maybe sometime in the future a central light controller (controls all lighting) might be an option on some boards connected to a light sensor, such that the lighting is adjusted automatically depending on room light (soft glow in dark room, bright glow in brighter rooms as a showcase).
Lighting looks great, however there are some very important downsides that you must consider before going towards a lit build:
it only suits cases with side Windows
silent cases aren't so silent with a side window, so best option would be to opt for a case with airflow instead if going for a lit case
cases on the floor to the right of the desk will meant the window is facing the desk, no good if the desk is largely solid on that side (or has draws etc)
if the case is in the bedroom at night and you have it on encoding or whatnot whilst sleeping, you have a pretty bright nightlight (positive or negative
?)
if the computer is on the right side on top of the desk the lighting can often be distracting
the lighting may look good now, but in two years time when you still have the same build, will it be cheesy?
current options are 'showey', if they still have them in the future I believe they will be more 'glowey'
how much extra cost does lighting add to manufacturing, and how much extra do you pay for the end product currently for the privilege of having lighting?
So if you do have a case with a side window, I think subtle glows of certain colours would be better than a randow mix of reasonably bright colour. By subtle glow I mean something that won't light the side of your face if you are in a dark room with the computer on the desk next to you. Adjustable brightness LED's would be nice. Maybe sometime in the future a central light controller (controls all lighting) might be an option on some boards connected to a light sensor, such that the lighting is adjusted automatically depending on room light (soft glow in dark room, bright glow in brighter rooms as a showcase).
stereoman
Senior Member
Posts: 739
Senior Member
Posts: 739
Posted on: 03/22/2017 04:12 PM
Lighting looks great, however there are some very important downsides that you must consider before going towards a lit build:
it only suits cases with side Windows
silent cases aren't so silent with a side window, so best option would be to opt for a case with airflow instead if going for a lit case
cases on the floor to the right of the desk will meant the window is facing the desk, no good if the desk is largely solid on that side (or has draws etc)
if the case is in the bedroom at night and you have it on encoding or whatnot whilst sleeping, you have a pretty bright nightlight (positive or negative?)
if the computer is on the right side on top of the desk the lighting can often be distracting
the lighting may look good now, but in two years time when you still have the same build, will it be cheesy?
current options are 'showey', if they still have them in the future I believe they will be more 'glowey'
how much extra cost does lighting add to manufacturing, and how much extra do you pay for the end product currently for the privilege of having lighting?
So if you do have a case with a side window, I think subtle glows of certain colours would be better than a randow mix of reasonably bright colour. By subtle glow I mean something that won't light the side of your face if you are in a dark room with the computer on the desk next to you. Adjustable brightness LED's would be nice. Maybe sometime in the future a central light controller (controls all lighting) might be an option on some boards connected to a light sensor, such that the lighting is adjusted automatically depending on room light (soft glow in dark room, bright glow in brighter rooms as a showcase).
All the lights in my system have controller software, I use Cam Software with my HUE+ LED system which can turn them off an on, change colours, brightness and patterns etc and I have Crucial Ballistix software which does the same thing for my ram, you can have a system with leds and control it all via software.
Lighting looks great, however there are some very important downsides that you must consider before going towards a lit build:
it only suits cases with side Windows
silent cases aren't so silent with a side window, so best option would be to opt for a case with airflow instead if going for a lit case
cases on the floor to the right of the desk will meant the window is facing the desk, no good if the desk is largely solid on that side (or has draws etc)
if the case is in the bedroom at night and you have it on encoding or whatnot whilst sleeping, you have a pretty bright nightlight (positive or negative
?)
if the computer is on the right side on top of the desk the lighting can often be distracting
the lighting may look good now, but in two years time when you still have the same build, will it be cheesy?
current options are 'showey', if they still have them in the future I believe they will be more 'glowey'
how much extra cost does lighting add to manufacturing, and how much extra do you pay for the end product currently for the privilege of having lighting?
So if you do have a case with a side window, I think subtle glows of certain colours would be better than a randow mix of reasonably bright colour. By subtle glow I mean something that won't light the side of your face if you are in a dark room with the computer on the desk next to you. Adjustable brightness LED's would be nice. Maybe sometime in the future a central light controller (controls all lighting) might be an option on some boards connected to a light sensor, such that the lighting is adjusted automatically depending on room light (soft glow in dark room, bright glow in brighter rooms as a showcase).
All the lights in my system have controller software, I use Cam Software with my HUE+ LED system which can turn them off an on, change colours, brightness and patterns etc and I have Crucial Ballistix software which does the same thing for my ram, you can have a system with leds and control it all via software.
thatguy91
Senior Member
Posts: 6648
Senior Member
Posts: 6648
Posted on: 03/22/2017 04:32 PM
Yeah that's what you need! The question is, will it still be on trend in 2 years time, and will new styling make current syling very meh? I must admit some of the effects look good, some of them are superfluous, and some of it just looks crap. This is particularly so when it is overdone. The LED uniform glow IMO looks signficantly better than having it look like the source is coming from LED's (if that makes sense), as well as being something that won't look dated in a year or two when they decide to change it.
Yeah that's what you need! The question is, will it still be on trend in 2 years time, and will new styling make current syling very meh? I must admit some of the effects look good, some of them are superfluous, and some of it just looks crap. This is particularly so when it is overdone. The LED uniform glow IMO looks signficantly better than having it look like the source is coming from LED's (if that makes sense), as well as being something that won't look dated in a year or two when they decide to change it.
Guru3dreader
Member
Posts: 28
Member
Posts: 28
Posted on: 03/29/2017 09:09 AM
wrong thread - delete
wrong thread - delete
Click here to post a comment for this article on the message forum.
Senior Member
Posts: 909
Great review HH. Well written and very informative. Much appreciated. Articles like this are what I love reading from you.