Product Photos

Product Photos

Any GeForce RTX 3070 Ti has been fitted with 8 Gigabytes of GDDR6X memory; it runs at 19 Gbps (effective data rate), which is a data-rate most of us can identify with when compared to the last-gen products. We'll show you the full specification details on the next pages. BTW we get often asked, but yes these photos are made with our own photos shoot, and are not provided externally.

The reference RTX 3060 Ti, 3070, 3080, 3080 Ti, and 3090 cards all get HDMI 2.1 connectors and the latest iteration in DisplayPort. The reference cards also get the new 12-pin power connecter header (converter cable included feeds from two 8-pin connectors). Mind you that I do refer to the FE editions here. AIB partner cards are free to choose and use whatever they deem applicable. ZOTAC opts for a duo of 8-pin PEG power connectors.

The IO panel is used as an air vent and shows four display connectors, three DisplayPort 1.4, and one HDMI 2.1 connector that will bring 8K 60 Hz HDR to a single HDMI cable. No more USB type-C VirtualLink connector, as that one is going the way of the dodo. 

The card has a nice stylish-looking shroud with underneath it the cooler. The design has some premium features, the updated cooler inclusive with the magical top side RGB strip. Interesting is the backside, as it reveals a backplate that is well ventilated, which should help provide passive thermal conduction properties towards the card.

The card does not offer a dual-BIOS, there's one mode only, the card is factory tweaked to a 1830 Mhz Boost frequency with added power allowance.