Toshiba TR200 SSD 960GB Review - Product Showcase

Product showcase

The following images were taken at high-resolution and then cropped and scaled down. The camera used was a Canon DSLR shooting 12 MegaPixel photos. Right then, here comes the packaging. Performance is listed at a maximum of 555 MB/s read and 540 MB/s writes with roughly 81,000 IOPS at 4k random read aligned disk access with our tested model.
 

This is the 2.5" SATA III version all packaged up in the bundle. You should easily be able to place it somewhere in your chassis. Small and light-weight. The SSD supports TRIM making sure your SSD will regain its speed once in idle. Obviously you do need to connect it to a proper SATA 3 (6G) controller though, the best ones can be found on the native Intel and AMD chipset SATA ports. This is a value drive so everything possible that doesn't have an impact on quality or the product itself was stripped away, no Acronis clone software is included or a mounting tray converter etc., just the SSD with nice metal shielding, some screws and a manual is in the bundle.

The SSD still feels a little heavy due to the housing. When we look at the connectors, we spot the standard power and Serial ATA connectors. This drive is SATA 3 (6G). Obviously the drives are backwards compatible with SATA 2 as well, but the bandwidth limitation there would be capped to roughly 270 MB/sec (which is still silly fast compared to HDDs). A proper SATA 6G cable is recommended and should be delivered with your motherboard. We, however, never ever had issues with a standard older SATA 2 cable either. It seems that SATA 3 cables are a little thicker, that's all. The casing of the SSD is made out of aluminum, great for shielding, cooling and it is light-weight for usage in a laptop.