Product showcase

Team Group T-Force Night Hawk Legend RGB memory is only available with heat spreaders in golden colour. It comes packed in a grey cardboard box with coloured accents.

There is information about support for Asus Aura Sync and other lighting systems, as well as the basic features (XMP 2.0, lifetime warranty).

The internal packaging is a typical clamshell design. It is a cheap but effective solution. The blister holds the 2 sticks securely. The radiators are integrated with the PCB by means of an adhesive pad on each side, and it would require significant strength (or heating up with a hairdryer for a longer period) to dismantle them, so I did not do it, and do not recommend it either.

Here is what it looks like after unpacking. These are two 8 GB modules running at 3200 MHz. They look quite original (and good). You can see the black PCB. The aluminium heat spreader has a polished finish. The lightbars are quite big compared with the entire package, so that should be a good one for the RGB-lovers.

On the sticker, you can read that it is a kit of 2 x 8 GB modules operating at 3200 MHz, with CL14, at 1.35 Volts. This should be more than enough for the typical user/gamer, but if you process video or graphics, then you’d want more capacity. For the best performance, we recommend sticking to the settings from the preconfigured XMP profile.

The total height of module is about 52 mm/2 inches. This can be an issue with some of the air coolers on the market, but as always: it’s best to double check whether any interference might occur before buying this set.