Product Installation

Product Installation

We are testing the cooler in a case, in order to recreate a real-life scenario. Here, you can see how many wires you will need to manage.

The RGB cable from the pump goes to the RGB header on the motherboard. The pump speed ranges from 1200 RPM up to 3000 RPM and has a max flow of 11 liters per minute. The pump is powered by a single SATA connector and controller by the IRIS ECO controller with a PWM connection (or plugged into motherboard header). The fans need power from 4-pin PWM connectors.

The H240 X3 comes packed with Swiftech’s IRIS ECO V2 controller. This is a PWM fan hub and RGB controller that can support the pump on the AIO, as well as three additional fans. The third PWM header allows using this controller with both the 240 mm and 360 mm variant of the X3 cooler. There are also three RGB headers and a small black button. This button lets you scroll through several pre-set colour options

The pressure of the block is very good. The tubing is flexible, and its position can be easily adjusted.

Above you can find a small teaser of what the H240 X3 looks like after booting. Want to see more? Then check the next page.