Riotoro Prism CR1280 Full Tower RGB review -
Product Showcase - Exterior
The Riotoro Prism CR1280 RGB has a bit of a non intrusive design. The bezel is mostly plastic. The body is itself steel and plastic combos mostly, making this chassis very light in weight at ~7kg. The has a size of (LxWxH): 478.1 x 250.72 x 577.50 mm (18.82 x 9.87 x 22.74 inches). Motherboard form factors supported are: E-ATX, ATX, microATX, Mini-ITX. So again, the maximum motherboard size that'll fit is E-ATX and NOT XL-ATX.
At the backside we see 8 expansion slots, so dual-slot cards to be set up in Crossfire or SLI mode. All the way below we see the PSU section. That PSU sits in ots own separated compartiment.
At the top the front panel connectivity can be found, inluding a new USB 2.0 / 3.1. You will also see FAN low / HIGH RPM and a button for the RGB lighting. Other then that, the usual suspects are here.
The top side has a magnatic dust cover, on top of that a plexi glass window. You can push it at the rear of the chassis like so:
Once done, you can take off that cover and remove / clean that dust cover. It works simple enough, but imho simple almost always is good.
We review the Riotoro CR1080 Compact PC Case Mini Tower, a product series that is designed for compact builds with decent looks. This case can house a regular ATX motherboard, but also has a special ...
Riotoro Prism CR1280 Full Tower RGB review
We review the new Riotoro Prism CR1280 Full Tower RGB, a product series that is designed for ease of use and decent looks as the side panel have been fitted with a see through windows. Armed with prop...