Phenom II X4 965 BE revision C3 review -
Performance - 3DMark06 | Vantage
3DMark 06 CPU test
Well, everybody loves 3DMark06, and nowadays, it's CPU limited, making it an okay application to check CPU performance. The scores that you see obviously are the CPU test itself, not overall 3DMark06 scores.
3DMark Vantage (DirectX 10)
3DMark Vantage focuses on the two areas most critical to gaming performance: the CPU and the GPU. With the emergence of multi-package and multi-core configurations on both the CPU and GPU side, the performance scale of these areas has widened, and the visual and game-play effects made possible by these configurations are accordingly wide-ranging. This makes covering the entire spectrum of 3D gaming a difficult task. 3DMark Vantage solves this problem in three ways:
1. Isolate GPU and CPU performance benchmarking into separate tests,
2. Cover several visual and game-play effects and techniques in four different tests, and
3. Introduce visual quality presets to scale the graphics test load up through the highest-end hardware.
To this end, 3DMark Vantage has two GPU tests, each with a different emphasis on various visual techniques, and two CPU tests, which cover the two most common CPU-side tasks: Physics Simulation and AI. It also has four visual quality presets (Entry, Performance, High, and Extreme) available in the Advanced and Professional versions, which increase the graphics load successively for even more visual quality. Each preset will produce a separate, official 3DMark Score, tagged with the preset in question.
The graphics load increases significantly from the lowest to the highest preset. The Performance preset is targeted for mid-range hardware with 256 MB of graphics memory. The Entry preset is targeted for integrated and low-end hardware with 128 MB of graphics memory. The higher presets require 512MB of graphics memory, and are targeted for high-end and multi-GPU systems.
3DMark Vantage also has a standalone CPU test. It's very multi-core and multi-threading aware, it was no surprise to see the Core i5 and i7 kick in real hard. The Phenom IIs have a really hard time battling with them.
| 3DMark Vantage | Vantage CPU Score | Performance Score |
| MSI 785 | 965BE | 11674 | 14499 |
| MSI 785 | 965BE 4 GHz | 13468 | 15253 |
| Core i7 940 | 18749 | 16436 |
With a new graphics card being used in the CPU etst suite, we don't have much other overall 3DMark Vantage Performance scores we can compare to. But above you can see that with a Radeon HD 5870 this PC would score (P) 14499 points. Overclocked to 4 GHz we'd gain a little more and drive it towards 15253 points.
AMDs current Deneb core over the past year and a half has been optimized and fine-tuned in many ways. As such, and honestly completely unneeded, AMD did decide to make their fastest Phenom II X4 processor even a slight bit faster, yes today they release their Phenom II X4 980 Black Edition processor, which clocks in at chill 3.7 GHz at default.
Phenom II X4 975 Black Edition review
Today two new products are launched by AMD, and here at Guru3D we'll review the fastest one. Let's have a peek first as to what AMD has got prepped for you with the right pricetag. It is that Phenom II X4 975 Black Edition we are interested in, clocked at 3.6 GHz.
Phenom II X6 1100T BE processor review
The new six-core 1100T processor is going to be interesting at 44 USD per core with it's clock at 3.3 GHz and Turbo to 3.7 GHz.
AMD Phenom II X6 1075T, X4 970BE and Athlon II X4 645 processor review
We test three AMD processors today, the Phenom II X6 1075T, Phenom II X4 970BE and Athlon II X4 645. They are part of the AMD Q4 processor product line update, arming their processor lineup with more value and higher performing CPUs.

