Product Showcase

As you can see the PSU is partly modular. There are lot's and lots of connections. The primary cables however are attached, thus the ATX power connector, CPU connector and a set of PEG (PCI EXpress Graphics) connectors are attached.

As you can see, the product has quite a normal length for a model this powerful. It has a length of 18 cm - it's complete dimensions are 150mm x 86mm x 180mm.

At the top you'll stumble into a big yet silent enough, 140 mm. A silent Ong Hua fan fan (ball bearing). Again if opted, it stays deactivated until load reaches 600 Watt. Below that number, the fan will disable itself. The fan is model HA1425M12B-Z and has a 2000rpm maximum rating though it sits at 1400rpm under full load.

And check that out, that's nearly 100A on the single 12V rails alone. Nice !  In theory this PSU could hold four GeForce GTX 680 cards or Radeon HD 7970 cards quite easily, and then you can still add a PhysX card and overclock. Obviously a PSU in this class is intended for the people that have a lot of components and like to overclock massively. Then again, a PSU is the most efficient at half of it's load .. so if 600W is your efficiency target ... that would make sense.