Patriot Viper VPN100 M2 NVMe 512 GB SSD Review -
Product Showcase
Product Showcase
Lets have a peek as to what the Patriot Viper VPN100 SSD looks like.
You can see the red/black box here. It’s very aesthetic, and it already shows you what the SSD looks like. Additionally, the name “Expert” at the bottom of the front part of the box might encourage some users, I guess. The performance of the 512 GB variant is listed as 3,300 MB/s for reads and 2,200 MB/sec for writes, with roughly 480K IOPS at 4k random writes aligned disk access in the case of the model we tested (the numbers differ per volume).
On the back side, you can find a list of the overall features, so nothing revolutionary here (but why would there be?).
Inside, in a plastic clamshell, you’ll discover the M.2 unit (8cm) itself. You need to put it into a motherboard compatible with the PCIe 3.0 x4 / NVMe 1.3 standard to unleash the full potential of the product.
The Viper VPN100 is covered with a nice of aluminum radiator. It should provide adequate cooling for the drive.
A side view shows how tall it is compared with the PCB itself. That’s 10.5mm in total.
Last “Product Showcase” picture. You can see the back of the Patriot VPN100 NVMe here, with the drive codename, warranty stickers, and serial number. Let’s head on to the practical part.
Today, we are looking at Patriot Viper Steel RGB 3600 MHz CL20 (yes – 20!) memory in a 32 GB set consisting of two 16 GB modules. I can say that we’ve had our fair share of experience with Patriot RAM. We had an opportunity to test a similarly clocked kit (3600 MHz) from the Viper Steel series (so no RGB there), but the capacity was 2 x 32 GB back then, and the latencies were quite surprisingly better, at 18-22-22-42. Before that, we also reviewed one of the fastest 2 x 8 GB kits in the range, clocked at 4000 MHz with CL19 latency.
Patriot Viper Steel DDR4 3600 MHz (64GB) review
Today, we are looking at Patriot Viper Steel 3600 MHz CL18 memory in a 64 GB set consisting of two 32 GB modules. At the beginning of 2019, we had an opportunity to check a higher-clocked kit from that series (4000 MHz), but the capacity was 2 x 8 GB. Patriot’s Viper Steel Series is offered at speeds ranging from 3000 MHz up to 4400 MHz, with XMP 2.0 support.
Patriot P200 1TB SATA3 SSD Review
Mid-July Patriot announced its P200 SATA SSD, intended as a storage solution with a really good price. We had the opportunity to test the 1TB model. This SATA SSD was built with Silicon Motion or Maxi...
Patriot Viper VPN100 M2 NVMe 512 GB SSD Review
At the end of March, Patriot released its Viper VPN100 M.2 SSD model, intended to be a really fast NVMe drive with good pricing. We had the opportunity to test the 512GB model. This M.2. NVMe SSD was ...