Patriot Viper Steel 4000 MHz CL19 DDR4 review - Product showcase

by Krzysztof Hukalowicz on: 01/29/2019 12:33 PM [

A heat spreader does not always bring the temperature down. Rather than that, it moves the heat from the chips to the PCB, distributing it more evenly throughout the entire module, and eliminating potential hot-spots. Theoretically, this should allow better overclocking. Viper Steel memory is a (quite) low-profile kit (as it’s 45 mm high).

Thanks to that you probably won’t have any issues with air/liquid coolers.

As it’s not an RGB module, you won’t have to install any utility to control the lighting. Ok, last shot of this nice memory.

Let’s proceed to the next page.

16 pages « 3 4 5 6 next »

Patriot Viper Steel 4000 MHz CL19 DDR4 review
Today we are reviewing Patriot Viper Steel DDR4 memory. This is a new variant of the Patriot Viper series, which quite surprisingly doesn’t have RGB support (unlike the Viper Gaming RGB kit ...

Patriot Viper Gaming RGB 3200 MHz DDR4 review
We review all-new Patriot Viper Gaming RGB 16 GB (dual channel) 3200 MHz DDR4 RAM kit from yes, you’ve guessed it right - Patriot. It’s not the fastest from this new series, but it...

Patriot EP Pro SDHC UHS-1 32GB review
We review the Patriot EP Pro SDHC UHS-1 32GB flash card. It's not your average SDHC storage card, this little fracker can read at 90 Mb/sec and write at 50 Mb/sec, making it amongst the fastest SDHC cards available on the market.

Patriot Pyro SE 240GB SSD review
Patriot wanted to release another SSD, something a little over the top and as such that meant releasing the Pyro SE SSD. While based on the SandForce 2281 controller Patriot did apply some tweaks to make the product even faster. To keep it up to snuff it comes with synchronous NAND flash memory. According to Patriot that will increase its sequential read and write performance to 550MB/s and 520MB/s.